On Sat, May 21, 2016 at 09:35:24AM +0300, Alexander Shiyan wrote: > Signed-off-by: Alexander Shiyan <shc_work@xxxxxxx> > --- > arch/arm/mach-imx/imx51.c | 19 ------------------- > 1 file changed, 19 deletions(-) Applied, thanks Sascha > > diff --git a/arch/arm/mach-imx/imx51.c b/arch/arm/mach-imx/imx51.c > index 70e8971..a6784d0 100644 > --- a/arch/arm/mach-imx/imx51.c > +++ b/arch/arm/mach-imx/imx51.c > @@ -83,25 +83,6 @@ int imx51_devices_init(void) > return 0; > } > > -/* > - * Saves the boot source media into the $bootsource environment variable > - * > - * This information is useful for barebox init scripts as we can then easily > - * use a kernel image stored on the same media that we launch barebox with > - * (for example). > - * > - * imx25 and imx35 can boot into barebox from several media such as > - * nand, nor, mmc/sd cards, serial roms. "mmc" is used to represent several > - * sources as its impossible to distinguish between them. > - * > - * Some sources such as serial roms can themselves have 3 different boot > - * possibilities (i2c1, i2c2 etc). It is assumed that any board will > - * only be using one of these at any one time. > - * > - * Note also that I suspect that the boot source pins are only sampled at > - * power up. > - */ > - > #define DP_MFN_800_DIT 60 /* PL Dither mode */ > > /* > -- > 2.4.9 > > > _______________________________________________ > barebox mailing list > barebox@xxxxxxxxxxxxxxxxxxx > http://lists.infradead.org/mailman/listinfo/barebox > -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
