Signed-off-by: Alexander Shiyan <shc_work@xxxxxxx> --- arch/arm/mach-imx/imx51.c | 19 ------------------- 1 file changed, 19 deletions(-) diff --git a/arch/arm/mach-imx/imx51.c b/arch/arm/mach-imx/imx51.c index 70e8971..a6784d0 100644 --- a/arch/arm/mach-imx/imx51.c +++ b/arch/arm/mach-imx/imx51.c @@ -83,25 +83,6 @@ int imx51_devices_init(void) return 0; } -/* - * Saves the boot source media into the $bootsource environment variable - * - * This information is useful for barebox init scripts as we can then easily - * use a kernel image stored on the same media that we launch barebox with - * (for example). - * - * imx25 and imx35 can boot into barebox from several media such as - * nand, nor, mmc/sd cards, serial roms. "mmc" is used to represent several - * sources as its impossible to distinguish between them. - * - * Some sources such as serial roms can themselves have 3 different boot - * possibilities (i2c1, i2c2 etc). It is assumed that any board will - * only be using one of these at any one time. - * - * Note also that I suspect that the boot source pins are only sampled at - * power up. - */ - #define DP_MFN_800_DIT 60 /* PL Dither mode */ /* -- 2.4.9 _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
