From: Fabio Estevam <fabio.estevam@xxxxxxx> After doing a 'saveenv' command, it is no longer possible to boot. The reason is that the 'barebox-environment' overwrites the barebox binary. Fix this problem by placing the environment into a proper SD card location, such as 0xc0000. Signed-off-by: Fabio Estevam <fabio.estevam@xxxxxxx> --- arch/arm/dts/imx6qdl-sabresd.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/dts/imx6qdl-sabresd.dtsi b/arch/arm/dts/imx6qdl-sabresd.dtsi index 32318cf..29dc4d4 100644 --- a/arch/arm/dts/imx6qdl-sabresd.dtsi +++ b/arch/arm/dts/imx6qdl-sabresd.dtsi @@ -34,8 +34,8 @@ reg = <0x0 0x80000>; }; - environment_usdhc3: partition@1 { + environment_usdhc3: partition@c0000 { label = "barebox-environment"; - reg = <0x80000 0x80000>; + reg = <0xc0000 0x80000>; }; }; -- 1.9.1 _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox