Hi, After running the 'saveenv' command on a mx6qsabresd board, I can no longer boot Barebox: barebox 2016.04.0-00120-gfeaf92e #18 Sat Apr 23 15:39:00 BRT 2016 Board: Freescale i.MX6 Quad SABRE Smart Device Board detected i.MX6 Quad revision 1.1 mdio_bus: miibus0: probed eth0: got preset MAC address: 00:04:9f:02:19:ca m25p80 m25p80@00: m25p32 (4096 Kbytes) imx-usb 2184200.usb: USB EHCI 1.00 imx-esdhc 2194000.usdhc: registered as 2194000.usdhc imx-esdhc 2198000.usdhc: registered as 2198000.usdhc imx-esdhc 219c000.usdhc: registered as 219c000.usdhc imx-ipuv3 2400000.ipu: IPUv3H probed imx-ipuv3 2800000.ipu: IPUv3H probed imx-hdmi 120000.hdmi: Detected HDMI controller 0x13:0xa:0xa0:0xc1 netconsole: registered as netconsole-1 malloc space: 0x2ff7b6e0 -> 0x4fef6dbf (size 511.5 MiB) imx-ipuv3-crtc imx-ipuv3-crtc0: failed to get modes: Invalid argument imx-ipuv3-crtc imx-ipuv3-crtc0: probe failed: Invalid argument imx-ipuv3-crtc imx-ipuv3-crtc1: failed to get modes: Invalid argument imx-ipuv3-crtc imx-ipuv3-crtc1: probe failed: Invalid argument imx-ipuv3-crtc imx-ipuv3-crtc2: failed to get modes: Invalid argument imx-ipuv3-crtc imx-ipuv3-crtc2: probe failed: Invalid argument imx-ipuv3-crtc imx-ipuv3-crtc3: failed to get modes: Invalid argument imx-ipuv3-crtc imx-ipuv3-crtc3: probe failed: Invalid argument mmc2: detected SD card version 2.0 mmc2: registered mmc2 envfs: wrong magic running /env/bin/init... Hit m for menu or any other key to stop autoboot: type exit to get to the menu barebox@Freescale i.MX6 Quad SABRE Smart Device Board:/ barebox@Freescale i.MX6 Quad SABRE Smart Device Board:/ saveenv saving environment barebox@Freescale i.MX6 Quad SABRE Smart Device Board:/ reset (board hangs...) Any suggestions on how to fix this? Thanks, Fabio Estevam _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
