Hello Michael, can you give me a little bit more information about the hardware you are using? As the phytec-som-am335x, includes 3 different modules. Names of the images in use and hardware revision of the som whould be great. I have made a quick test it with a phycore som on master. It worked for me. Regards, Teresa Am Mittwoch, den 23.09.2015, 17:28 +0200 schrieb Michael Grzeschik: > Hi Teresa, > > With the current code for the phytec-som-am335x, the ethernet works only > after the first powerup. If you soft reset the module the network won't > work anymore. > > ... > cpsw 4a100000.ethernet: detected phy mask 0x6 > mdio_bus: miibus0: probed > cpsw 4a100000.ethernet: Failed to setup slave 0: I/O error > ... > > That happens in the second boot. The phy is probably in a wrong state and > won't communicate over MDIO. > > Do you have any ideas? > > Thanks, > Michael > _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
