U-Boot has code to replace the infamous Freescale bootlet code.
This patch adds this for barebox with some changes:
- Separate it more into mx23/mx28 functions instead of mxs functions
with #ifdefs for the actual SoC
- Add mx2x_power_init_battery_input() power entry point for boards
which have a regulated input on the battery pin to supply the board.
- Export more functions to be more flexible when boards need non standard
setup.
Signed-off-by: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
---
arch/arm/mach-mxs/Makefile | 1 +
arch/arm/mach-mxs/include/mach/init.h | 30 +
arch/arm/mach-mxs/include/mach/regs-clkctrl-mx23.h | 208 ++++
arch/arm/mach-mxs/include/mach/regs-clkctrl-mx28.h | 283 +++++
arch/arm/mach-mxs/include/mach/regs-common.h | 69 ++
arch/arm/mach-mxs/include/mach/regs-lradc.h | 387 ++++++
arch/arm/mach-mxs/include/mach/regs-power-mx28.h | 408 +++++++
arch/arm/mach-mxs/include/mach/regs-rtc.h | 134 ++
arch/arm/mach-mxs/lradc-init.c | 70 ++
arch/arm/mach-mxs/mem-init.c | 292 +++++
arch/arm/mach-mxs/power-init.c | 1274 ++++++++++++++++++++
11 files changed, 3156 insertions(+)
create mode 100644 arch/arm/mach-mxs/include/mach/init.h
create mode 100644 arch/arm/mach-mxs/include/mach/regs-clkctrl-mx23.h
create mode 100644 arch/arm/mach-mxs/include/mach/regs-clkctrl-mx28.h
create mode 100644 arch/arm/mach-mxs/include/mach/regs-common.h
create mode 100644 arch/arm/mach-mxs/include/mach/regs-lradc.h
create mode 100644 arch/arm/mach-mxs/include/mach/regs-power-mx28.h
create mode 100644 arch/arm/mach-mxs/include/mach/regs-rtc.h
create mode 100644 arch/arm/mach-mxs/lradc-init.c
create mode 100644 arch/arm/mach-mxs/mem-init.c
create mode 100644 arch/arm/mach-mxs/power-init.c
diff --git a/arch/arm/mach-mxs/Makefile b/arch/arm/mach-mxs/Makefile
index bd6892e..bf949bc 100644
--- a/arch/arm/mach-mxs/Makefile
+++ b/arch/arm/mach-mxs/Makefile
@@ -3,3 +3,4 @@ obj-$(CONFIG_ARCH_IMX23) += clocksource-imx23.o usb-imx23.o soc-imx23.o
obj-$(CONFIG_ARCH_IMX28) += clocksource-imx28.o usb-imx28.o soc-imx28.o
obj-$(CONFIG_MXS_OCOTP) += ocotp.o
obj-$(CONFIG_MXS_CMD_BCB) += bcb.o
+pbl-y += power-init.o mem-init.o lradc-init.o
diff --git a/arch/arm/mach-mxs/include/mach/init.h b/arch/arm/mach-mxs/include/mach/init.h
new file mode 100644
index 0000000..d1ac2e4
--- /dev/null
+++ b/arch/arm/mach-mxs/include/mach/init.h
@@ -0,0 +1,30 @@
+/*
+ * Freescale i.MX28 SPL functions
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@xxxxxxxxx>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __M28_INIT_H__
+#define __M28_INIT_H__
+
+void mxs_early_delay(int delay);
+
+void mx23_power_init(void);
+void mx23_power_init_battery_input(void);
+void mx28_power_init(void);
+void mx28_power_init_battery_input(void);
+void mxs_power_wait_pswitch(void);
+
+void mx23_mem_init(void);
+void mx28_mem_init(void);
+void mxs_mem_setup_cpu_and_hbus(void);
+void mxs_mem_setup_vdda(void);
+void mxs_mem_init_clock(unsigned char divider);
+
+void mxs_lradc_init(void);
+void mxs_lradc_enable_batt_measurement(void);
+
+#endif /* __M28_INIT_H__ */
diff --git a/arch/arm/mach-mxs/include/mach/regs-clkctrl-mx23.h b/arch/arm/mach-mxs/include/mach/regs-clkctrl-mx23.h
new file mode 100644
index 0000000..289b159
--- /dev/null
+++ b/arch/arm/mach-mxs/include/mach/regs-clkctrl-mx23.h
@@ -0,0 +1,208 @@
+/*
+ * Freescale i.MX23 CLKCTRL Register Definitions
+ *
+ * Copyright (C) 2012 Marek Vasut <marek.vasut@xxxxxxxxx>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * Based on code from LTIB:
+ * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __MX23_REGS_CLKCTRL_H__
+#define __MX23_REGS_CLKCTRL_H__
+
+#include <mach/regs-common.h>
+
+#ifndef __ASSEMBLY__
+struct mxs_clkctrl_regs {
+ mxs_reg_32(hw_clkctrl_pll0ctrl0) /* 0x00 */
+ uint32_t hw_clkctrl_pll0ctrl1; /* 0x10 */
+ uint32_t reserved_pll0ctrl1[3]; /* 0x14-0x1c */
+ mxs_reg_32(hw_clkctrl_cpu) /* 0x20 */
+ mxs_reg_32(hw_clkctrl_hbus) /* 0x30 */
+ mxs_reg_32(hw_clkctrl_xbus) /* 0x40 */
+ mxs_reg_32(hw_clkctrl_xtal) /* 0x50 */
+ mxs_reg_32(hw_clkctrl_pix) /* 0x60 */
+ mxs_reg_32(hw_clkctrl_ssp0) /* 0x70 */
+ mxs_reg_32(hw_clkctrl_gpmi) /* 0x80 */
+ mxs_reg_32(hw_clkctrl_spdif) /* 0x90 */
+ mxs_reg_32(hw_clkctrl_emi) /* 0xa0 */
+
+ uint32_t reserved1[4];
+
+ mxs_reg_32(hw_clkctrl_saif0) /* 0xc0 */
+ mxs_reg_32(hw_clkctrl_tv) /* 0xd0 */
+ mxs_reg_32(hw_clkctrl_etm) /* 0xe0 */
+ mxs_reg_8(hw_clkctrl_frac0) /* 0xf0 */
+ mxs_reg_8(hw_clkctrl_frac1) /* 0x100 */
+ mxs_reg_32(hw_clkctrl_clkseq) /* 0x110 */
+ mxs_reg_32(hw_clkctrl_reset) /* 0x120 */
+ mxs_reg_32(hw_clkctrl_status) /* 0x130 */
+ mxs_reg_32(hw_clkctrl_version) /* 0x140 */
+};
+#endif
+
+#define CLKCTRL_PLL0CTRL0_LFR_SEL_MASK (0x3 << 28)
+#define CLKCTRL_PLL0CTRL0_LFR_SEL_OFFSET 28
+#define CLKCTRL_PLL0CTRL0_LFR_SEL_DEFAULT (0x0 << 28)
+#define CLKCTRL_PLL0CTRL0_LFR_SEL_TIMES_2 (0x1 << 28)
+#define CLKCTRL_PLL0CTRL0_LFR_SEL_TIMES_05 (0x2 << 28)
+#define CLKCTRL_PLL0CTRL0_LFR_SEL_UNDEFINED (0x3 << 28)
+#define CLKCTRL_PLL0CTRL0_CP_SEL_MASK (0x3 << 24)
+#define CLKCTRL_PLL0CTRL0_CP_SEL_OFFSET 24
+#define CLKCTRL_PLL0CTRL0_CP_SEL_DEFAULT (0x0 << 24)
+#define CLKCTRL_PLL0CTRL0_CP_SEL_TIMES_2 (0x1 << 24)
+#define CLKCTRL_PLL0CTRL0_CP_SEL_TIMES_05 (0x2 << 24)
+#define CLKCTRL_PLL0CTRL0_CP_SEL_UNDEFINED (0x3 << 24)
+#define CLKCTRL_PLL0CTRL0_DIV_SEL_MASK (0x3 << 20)
+#define CLKCTRL_PLL0CTRL0_DIV_SEL_OFFSET 20
+#define CLKCTRL_PLL0CTRL0_DIV_SEL_DEFAULT (0x0 << 20)
+#define CLKCTRL_PLL0CTRL0_DIV_SEL_LOWER (0x1 << 20)
+#define CLKCTRL_PLL0CTRL0_DIV_SEL_LOWEST (0x2 << 20)
+#define CLKCTRL_PLL0CTRL0_DIV_SEL_UNDEFINED (0x3 << 20)
+#define CLKCTRL_PLL0CTRL0_EN_USB_CLKS (1 << 18)
+#define CLKCTRL_PLL0CTRL0_POWER (1 << 16)
+
+#define CLKCTRL_PLL0CTRL1_LOCK (1 << 31)
+#define CLKCTRL_PLL0CTRL1_FORCE_LOCK (1 << 30)
+#define CLKCTRL_PLL0CTRL1_LOCK_COUNT_MASK 0xffff
+#define CLKCTRL_PLL0CTRL1_LOCK_COUNT_OFFSET 0
+
+#define CLKCTRL_CPU_BUSY_REF_XTAL (1 << 29)
+#define CLKCTRL_CPU_BUSY_REF_CPU (1 << 28)
+#define CLKCTRL_CPU_DIV_XTAL_FRAC_EN (1 << 26)
+#define CLKCTRL_CPU_DIV_XTAL_MASK (0x3ff << 16)
+#define CLKCTRL_CPU_DIV_XTAL_OFFSET 16
+#define CLKCTRL_CPU_INTERRUPT_WAIT (1 << 12)
+#define CLKCTRL_CPU_DIV_CPU_FRAC_EN (1 << 10)
+#define CLKCTRL_CPU_DIV_CPU_MASK 0x3f
+#define CLKCTRL_CPU_DIV_CPU_OFFSET 0
+
+#define CLKCTRL_HBUS_BUSY (1 << 29)
+#define CLKCTRL_HBUS_DCP_AS_ENABLE (1 << 28)
+#define CLKCTRL_HBUS_PXP_AS_ENABLE (1 << 27)
+#define CLKCTRL_HBUS_APBHDMA_AS_ENABLE (1 << 26)
+#define CLKCTRL_HBUS_APBXDMA_AS_ENABLE (1 << 25)
+#define CLKCTRL_HBUS_TRAFFIC_JAM_AS_ENABLE (1 << 24)
+#define CLKCTRL_HBUS_TRAFFIC_AS_ENABLE (1 << 23)
+#define CLKCTRL_HBUS_CPU_DATA_AS_ENABLE (1 << 22)
+#define CLKCTRL_HBUS_CPU_INSTR_AS_ENABLE (1 << 21)
+#define CLKCTRL_HBUS_AUTO_SLOW_MODE (1 << 20)
+#define CLKCTRL_HBUS_SLOW_DIV_MASK (0x7 << 16)
+#define CLKCTRL_HBUS_SLOW_DIV_OFFSET 16
+#define CLKCTRL_HBUS_SLOW_DIV_BY1 (0x0 << 16)
+#define CLKCTRL_HBUS_SLOW_DIV_BY2 (0x1 << 16)
+#define CLKCTRL_HBUS_SLOW_DIV_BY4 (0x2 << 16)
+#define CLKCTRL_HBUS_SLOW_DIV_BY8 (0x3 << 16)
+#define CLKCTRL_HBUS_SLOW_DIV_BY16 (0x4 << 16)
+#define CLKCTRL_HBUS_SLOW_DIV_BY32 (0x5 << 16)
+#define CLKCTRL_HBUS_DIV_FRAC_EN (1 << 5)
+#define CLKCTRL_HBUS_DIV_MASK 0x1f
+#define CLKCTRL_HBUS_DIV_OFFSET 0
+
+#define CLKCTRL_XBUS_BUSY (1 << 31)
+#define CLKCTRL_XBUS_DIV_FRAC_EN (1 << 10)
+#define CLKCTRL_XBUS_DIV_MASK 0x3ff
+#define CLKCTRL_XBUS_DIV_OFFSET 0
+
+#define CLKCTRL_XTAL_UART_CLK_GATE (1 << 31)
+#define CLKCTRL_XTAL_FILT_CLK24M_GATE (1 << 30)
+#define CLKCTRL_XTAL_PWM_CLK24M_GATE (1 << 29)
+#define CLKCTRL_XTAL_DRI_CLK24M_GATE (1 << 28)
+#define CLKCTRL_XTAL_DIGCTRL_CLK1M_GATE (1 << 27)
+#define CLKCTRL_XTAL_TIMROT_CLK32K_GATE (1 << 26)
+#define CLKCTRL_XTAL_DIV_UART_MASK 0x3
+#define CLKCTRL_XTAL_DIV_UART_OFFSET 0
+
+#define CLKCTRL_PIX_CLKGATE (1 << 31)
+#define CLKCTRL_PIX_BUSY (1 << 29)
+#define CLKCTRL_PIX_DIV_FRAC_EN (1 << 12)
+#define CLKCTRL_PIX_DIV_MASK 0xfff
+#define CLKCTRL_PIX_DIV_OFFSET 0
+
+#define CLKCTRL_SSP_CLKGATE (1 << 31)
+#define CLKCTRL_SSP_BUSY (1 << 29)
+#define CLKCTRL_SSP_DIV_FRAC_EN (1 << 9)
+#define CLKCTRL_SSP_DIV_MASK 0x1ff
+#define CLKCTRL_SSP_DIV_OFFSET 0
+
+#define CLKCTRL_GPMI_CLKGATE (1 << 31)
+#define CLKCTRL_GPMI_BUSY (1 << 29)
+#define CLKCTRL_GPMI_DIV_FRAC_EN (1 << 10)
+#define CLKCTRL_GPMI_DIV_MASK 0x3ff
+#define CLKCTRL_GPMI_DIV_OFFSET 0
+
+#define CLKCTRL_SPDIF_CLKGATE (1 << 31)
+
+#define CLKCTRL_EMI_CLKGATE (1 << 31)
+#define CLKCTRL_EMI_SYNC_MODE_EN (1 << 30)
+#define CLKCTRL_EMI_BUSY_REF_XTAL (1 << 29)
+#define CLKCTRL_EMI_BUSY_REF_EMI (1 << 28)
+#define CLKCTRL_EMI_BUSY_REF_CPU (1 << 27)
+#define CLKCTRL_EMI_BUSY_SYNC_MODE (1 << 26)
+#define CLKCTRL_EMI_BUSY_DCC_RESYNC (1 << 17)
+#define CLKCTRL_EMI_DCC_RESYNC_ENABLE (1 << 16)
+#define CLKCTRL_EMI_DIV_XTAL_MASK (0xf << 8)
+#define CLKCTRL_EMI_DIV_XTAL_OFFSET 8
+#define CLKCTRL_EMI_DIV_EMI_MASK 0x3f
+#define CLKCTRL_EMI_DIV_EMI_OFFSET 0
+
+#define CLKCTRL_IR_CLKGATE (1 << 31)
+#define CLKCTRL_IR_AUTO_DIV (1 << 29)
+#define CLKCTRL_IR_IR_BUSY (1 << 28)
+#define CLKCTRL_IR_IROV_BUSY (1 << 27)
+#define CLKCTRL_IR_IROV_DIV_MASK (0x1ff << 16)
+#define CLKCTRL_IR_IROV_DIV_OFFSET 16
+#define CLKCTRL_IR_IR_DIV_MASK 0x3ff
+#define CLKCTRL_IR_IR_DIV_OFFSET 0
+
+#define CLKCTRL_SAIF0_CLKGATE (1 << 31)
+#define CLKCTRL_SAIF0_BUSY (1 << 29)
+#define CLKCTRL_SAIF0_DIV_FRAC_EN (1 << 16)
+#define CLKCTRL_SAIF0_DIV_MASK 0xffff
+#define CLKCTRL_SAIF0_DIV_OFFSET 0
+
+#define CLKCTRL_TV_CLK_TV108M_GATE (1 << 31)
+#define CLKCTRL_TV_CLK_TV_GATE (1 << 30)
+
+#define CLKCTRL_ETM_CLKGATE (1 << 31)
+#define CLKCTRL_ETM_BUSY (1 << 29)
+#define CLKCTRL_ETM_DIV_FRAC_EN (1 << 6)
+#define CLKCTRL_ETM_DIV_MASK 0x3f
+#define CLKCTRL_ETM_DIV_OFFSET 0
+
+#define CLKCTRL_FRAC_CLKGATE (1 << 7)
+#define CLKCTRL_FRAC_STABLE (1 << 6)
+#define CLKCTRL_FRAC_FRAC_MASK 0x3f
+#define CLKCTRL_FRAC_FRAC_OFFSET 0
+#define CLKCTRL_FRAC0_CPU 0
+#define CLKCTRL_FRAC0_EMI 1
+#define CLKCTRL_FRAC0_PIX 2
+#define CLKCTRL_FRAC0_IO0 3
+#define CLKCTRL_FRAC1_VID 3
+
+#define CLKCTRL_CLKSEQ_BYPASS_ETM (1 << 8)
+#define CLKCTRL_CLKSEQ_BYPASS_CPU (1 << 7)
+#define CLKCTRL_CLKSEQ_BYPASS_EMI (1 << 6)
+#define CLKCTRL_CLKSEQ_BYPASS_SSP0 (1 << 5)
+#define CLKCTRL_CLKSEQ_BYPASS_GPMI (1 << 4)
+#define CLKCTRL_CLKSEQ_BYPASS_IR (1 << 3)
+#define CLKCTRL_CLKSEQ_BYPASS_PIX (1 << 1)
+#define CLKCTRL_CLKSEQ_BYPASS_SAIF (1 << 0)
+
+#define CLKCTRL_RESET_CHIP (1 << 1)
+#define CLKCTRL_RESET_DIG (1 << 0)
+
+#define CLKCTRL_STATUS_CPU_LIMIT_MASK (0x3 << 30)
+#define CLKCTRL_STATUS_CPU_LIMIT_OFFSET 30
+
+#define CLKCTRL_VERSION_MAJOR_MASK (0xff << 24)
+#define CLKCTRL_VERSION_MAJOR_OFFSET 24
+#define CLKCTRL_VERSION_MINOR_MASK (0xff << 16)
+#define CLKCTRL_VERSION_MINOR_OFFSET 16
+#define CLKCTRL_VERSION_STEP_MASK 0xffff
+#define CLKCTRL_VERSION_STEP_OFFSET 0
+
+#endif /* __MX23_REGS_CLKCTRL_H__ */
diff --git a/arch/arm/mach-mxs/include/mach/regs-clkctrl-mx28.h b/arch/arm/mach-mxs/include/mach/regs-clkctrl-mx28.h
new file mode 100644
index 0000000..aebb489
--- /dev/null
+++ b/arch/arm/mach-mxs/include/mach/regs-clkctrl-mx28.h
@@ -0,0 +1,283 @@
+/*
+ * Freescale i.MX28 CLKCTRL Register Definitions
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@xxxxxxxxx>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * Based on code from LTIB:
+ * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __MX28_REGS_CLKCTRL_H__
+#define __MX28_REGS_CLKCTRL_H__
+
+#include <mach/regs-common.h>
+
+#ifndef __ASSEMBLY__
+struct mxs_clkctrl_regs {
+ mxs_reg_32(hw_clkctrl_pll0ctrl0) /* 0x00 */
+ uint32_t hw_clkctrl_pll0ctrl1; /* 0x10 */
+ uint32_t reserved_pll0ctrl1[3]; /* 0x14-0x1c */
+ mxs_reg_32(hw_clkctrl_pll1ctrl0) /* 0x20 */
+ uint32_t hw_clkctrl_pll1ctrl1; /* 0x30 */
+ uint32_t reserved_pll1ctrl1[3]; /* 0x34-0x3c */
+ mxs_reg_32(hw_clkctrl_pll2ctrl0) /* 0x40 */
+ mxs_reg_32(hw_clkctrl_cpu) /* 0x50 */
+ mxs_reg_32(hw_clkctrl_hbus) /* 0x60 */
+ mxs_reg_32(hw_clkctrl_xbus) /* 0x70 */
+ mxs_reg_32(hw_clkctrl_xtal) /* 0x80 */
+ mxs_reg_32(hw_clkctrl_ssp0) /* 0x90 */
+ mxs_reg_32(hw_clkctrl_ssp1) /* 0xa0 */
+ mxs_reg_32(hw_clkctrl_ssp2) /* 0xb0 */
+ mxs_reg_32(hw_clkctrl_ssp3) /* 0xc0 */
+ mxs_reg_32(hw_clkctrl_gpmi) /* 0xd0 */
+ mxs_reg_32(hw_clkctrl_spdif) /* 0xe0 */
+ mxs_reg_32(hw_clkctrl_emi) /* 0xf0 */
+ mxs_reg_32(hw_clkctrl_saif0) /* 0x100 */
+ mxs_reg_32(hw_clkctrl_saif1) /* 0x110 */
+ mxs_reg_32(hw_clkctrl_lcdif) /* 0x120 */
+ mxs_reg_32(hw_clkctrl_etm) /* 0x130 */
+ mxs_reg_32(hw_clkctrl_enet) /* 0x140 */
+ mxs_reg_32(hw_clkctrl_hsadc) /* 0x150 */
+ mxs_reg_32(hw_clkctrl_flexcan) /* 0x160 */
+
+ uint32_t reserved[16];
+
+ mxs_reg_8(hw_clkctrl_frac0) /* 0x1b0 */
+ mxs_reg_8(hw_clkctrl_frac1) /* 0x1c0 */
+ mxs_reg_32(hw_clkctrl_clkseq) /* 0x1d0 */
+ mxs_reg_32(hw_clkctrl_reset) /* 0x1e0 */
+ mxs_reg_32(hw_clkctrl_status) /* 0x1f0 */
+ mxs_reg_32(hw_clkctrl_version) /* 0x200 */
+};
+#endif
+
+#define CLKCTRL_PLL0CTRL0_LFR_SEL_MASK (0x3 << 28)
+#define CLKCTRL_PLL0CTRL0_LFR_SEL_OFFSET 28
+#define CLKCTRL_PLL0CTRL0_LFR_SEL_DEFAULT (0x0 << 28)
+#define CLKCTRL_PLL0CTRL0_LFR_SEL_TIMES_2 (0x1 << 28)
+#define CLKCTRL_PLL0CTRL0_LFR_SEL_TIMES_05 (0x2 << 28)
+#define CLKCTRL_PLL0CTRL0_LFR_SEL_UNDEFINED (0x3 << 28)
+#define CLKCTRL_PLL0CTRL0_CP_SEL_MASK (0x3 << 24)
+#define CLKCTRL_PLL0CTRL0_CP_SEL_OFFSET 24
+#define CLKCTRL_PLL0CTRL0_CP_SEL_DEFAULT (0x0 << 24)
+#define CLKCTRL_PLL0CTRL0_CP_SEL_TIMES_2 (0x1 << 24)
+#define CLKCTRL_PLL0CTRL0_CP_SEL_TIMES_05 (0x2 << 24)
+#define CLKCTRL_PLL0CTRL0_CP_SEL_UNDEFINED (0x3 << 24)
+#define CLKCTRL_PLL0CTRL0_DIV_SEL_MASK (0x3 << 20)
+#define CLKCTRL_PLL0CTRL0_DIV_SEL_OFFSET 20
+#define CLKCTRL_PLL0CTRL0_DIV_SEL_DEFAULT (0x0 << 20)
+#define CLKCTRL_PLL0CTRL0_DIV_SEL_LOWER (0x1 << 20)
+#define CLKCTRL_PLL0CTRL0_DIV_SEL_LOWEST (0x2 << 20)
+#define CLKCTRL_PLL0CTRL0_DIV_SEL_UNDEFINED (0x3 << 20)
+#define CLKCTRL_PLL0CTRL0_EN_USB_CLKS (1 << 18)
+#define CLKCTRL_PLL0CTRL0_POWER (1 << 17)
+
+#define CLKCTRL_PLL0CTRL1_LOCK (1 << 31)
+#define CLKCTRL_PLL0CTRL1_FORCE_LOCK (1 << 30)
+#define CLKCTRL_PLL0CTRL1_LOCK_COUNT_MASK 0xffff
+#define CLKCTRL_PLL0CTRL1_LOCK_COUNT_OFFSET 0
+
+#define CLKCTRL_PLL1CTRL0_CLKGATEEMI (1 << 31)
+#define CLKCTRL_PLL1CTRL0_LFR_SEL_MASK (0x3 << 28)
+#define CLKCTRL_PLL1CTRL0_LFR_SEL_OFFSET 28
+#define CLKCTRL_PLL1CTRL0_LFR_SEL_DEFAULT (0x0 << 28)
+#define CLKCTRL_PLL1CTRL0_LFR_SEL_TIMES_2 (0x1 << 28)
+#define CLKCTRL_PLL1CTRL0_LFR_SEL_TIMES_05 (0x2 << 28)
+#define CLKCTRL_PLL1CTRL0_LFR_SEL_UNDEFINED (0x3 << 28)
+#define CLKCTRL_PLL1CTRL0_CP_SEL_MASK (0x3 << 24)
+#define CLKCTRL_PLL1CTRL0_CP_SEL_OFFSET 24
+#define CLKCTRL_PLL1CTRL0_CP_SEL_DEFAULT (0x0 << 24)
+#define CLKCTRL_PLL1CTRL0_CP_SEL_TIMES_2 (0x1 << 24)
+#define CLKCTRL_PLL1CTRL0_CP_SEL_TIMES_05 (0x2 << 24)
+#define CLKCTRL_PLL1CTRL0_CP_SEL_UNDEFINED (0x3 << 24)
+#define CLKCTRL_PLL1CTRL0_DIV_SEL_MASK (0x3 << 20)
+#define CLKCTRL_PLL1CTRL0_DIV_SEL_OFFSET 20
+#define CLKCTRL_PLL1CTRL0_DIV_SEL_DEFAULT (0x0 << 20)
+#define CLKCTRL_PLL1CTRL0_DIV_SEL_LOWER (0x1 << 20)
+#define CLKCTRL_PLL1CTRL0_DIV_SEL_LOWEST (0x2 << 20)
+#define CLKCTRL_PLL1CTRL0_DIV_SEL_UNDEFINED (0x3 << 20)
+#define CLKCTRL_PLL1CTRL0_EN_USB_CLKS (1 << 18)
+#define CLKCTRL_PLL1CTRL0_POWER (1 << 17)
+
+#define CLKCTRL_PLL1CTRL1_LOCK (1 << 31)
+#define CLKCTRL_PLL1CTRL1_FORCE_LOCK (1 << 30)
+#define CLKCTRL_PLL1CTRL1_LOCK_COUNT_MASK 0xffff
+#define CLKCTRL_PLL1CTRL1_LOCK_COUNT_OFFSET 0
+
+#define CLKCTRL_PLL2CTRL0_CLKGATE (1 << 31)
+#define CLKCTRL_PLL2CTRL0_LFR_SEL_MASK (0x3 << 28)
+#define CLKCTRL_PLL2CTRL0_LFR_SEL_OFFSET 28
+#define CLKCTRL_PLL2CTRL0_HOLD_RING_OFF_B (1 << 26)
+#define CLKCTRL_PLL2CTRL0_CP_SEL_MASK (0x3 << 24)
+#define CLKCTRL_PLL2CTRL0_CP_SEL_OFFSET 24
+#define CLKCTRL_PLL2CTRL0_POWER (1 << 23)
+
+#define CLKCTRL_CPU_BUSY_REF_XTAL (1 << 29)
+#define CLKCTRL_CPU_BUSY_REF_CPU (1 << 28)
+#define CLKCTRL_CPU_DIV_XTAL_FRAC_EN (1 << 26)
+#define CLKCTRL_CPU_DIV_XTAL_MASK (0x3ff << 16)
+#define CLKCTRL_CPU_DIV_XTAL_OFFSET 16
+#define CLKCTRL_CPU_INTERRUPT_WAIT (1 << 12)
+#define CLKCTRL_CPU_DIV_CPU_FRAC_EN (1 << 10)
+#define CLKCTRL_CPU_DIV_CPU_MASK 0x3f
+#define CLKCTRL_CPU_DIV_CPU_OFFSET 0
+
+#define CLKCTRL_HBUS_ASM_BUSY (1 << 31)
+#define CLKCTRL_HBUS_DCP_AS_ENABLE (1 << 30)
+#define CLKCTRL_HBUS_PXP_AS_ENABLE (1 << 29)
+#define CLKCTRL_HBUS_ASM_EMIPORT_AS_ENABLE (1 << 27)
+#define CLKCTRL_HBUS_APBHDMA_AS_ENABLE (1 << 26)
+#define CLKCTRL_HBUS_APBXDMA_AS_ENABLE (1 << 25)
+#define CLKCTRL_HBUS_TRAFFIC_JAM_AS_ENABLE (1 << 24)
+#define CLKCTRL_HBUS_TRAFFIC_AS_ENABLE (1 << 23)
+#define CLKCTRL_HBUS_CPU_DATA_AS_ENABLE (1 << 22)
+#define CLKCTRL_HBUS_CPU_INSTR_AS_ENABLE (1 << 21)
+#define CLKCTRL_HBUS_ASM_ENABLE (1 << 20)
+#define CLKCTRL_HBUS_AUTO_CLEAR_DIV_ENABLE (1 << 19)
+#define CLKCTRL_HBUS_SLOW_DIV_MASK (0x7 << 16)
+#define CLKCTRL_HBUS_SLOW_DIV_OFFSET 16
+#define CLKCTRL_HBUS_SLOW_DIV_BY1 (0x0 << 16)
+#define CLKCTRL_HBUS_SLOW_DIV_BY2 (0x1 << 16)
+#define CLKCTRL_HBUS_SLOW_DIV_BY4 (0x2 << 16)
+#define CLKCTRL_HBUS_SLOW_DIV_BY8 (0x3 << 16)
+#define CLKCTRL_HBUS_SLOW_DIV_BY16 (0x4 << 16)
+#define CLKCTRL_HBUS_SLOW_DIV_BY32 (0x5 << 16)
+#define CLKCTRL_HBUS_DIV_FRAC_EN (1 << 5)
+#define CLKCTRL_HBUS_DIV_MASK 0x1f
+#define CLKCTRL_HBUS_DIV_OFFSET 0
+
+#define CLKCTRL_XBUS_BUSY (1 << 31)
+#define CLKCTRL_XBUS_AUTO_CLEAR_DIV_ENABLE (1 << 11)
+#define CLKCTRL_XBUS_DIV_FRAC_EN (1 << 10)
+#define CLKCTRL_XBUS_DIV_MASK 0x3ff
+#define CLKCTRL_XBUS_DIV_OFFSET 0
+
+#define CLKCTRL_XTAL_UART_CLK_GATE (1 << 31)
+#define CLKCTRL_XTAL_PWM_CLK24M_GATE (1 << 29)
+#define CLKCTRL_XTAL_TIMROT_CLK32K_GATE (1 << 26)
+#define CLKCTRL_XTAL_DIV_UART_MASK 0x3
+#define CLKCTRL_XTAL_DIV_UART_OFFSET 0
+
+#define CLKCTRL_SSP_CLKGATE (1 << 31)
+#define CLKCTRL_SSP_BUSY (1 << 29)
+#define CLKCTRL_SSP_DIV_FRAC_EN (1 << 9)
+#define CLKCTRL_SSP_DIV_MASK 0x1ff
+#define CLKCTRL_SSP_DIV_OFFSET 0
+
+#define CLKCTRL_GPMI_CLKGATE (1 << 31)
+#define CLKCTRL_GPMI_BUSY (1 << 29)
+#define CLKCTRL_GPMI_DIV_FRAC_EN (1 << 10)
+#define CLKCTRL_GPMI_DIV_MASK 0x3ff
+#define CLKCTRL_GPMI_DIV_OFFSET 0
+
+#define CLKCTRL_SPDIF_CLKGATE (1 << 31)
+
+#define CLKCTRL_EMI_CLKGATE (1 << 31)
+#define CLKCTRL_EMI_SYNC_MODE_EN (1 << 30)
+#define CLKCTRL_EMI_BUSY_REF_XTAL (1 << 29)
+#define CLKCTRL_EMI_BUSY_REF_EMI (1 << 28)
+#define CLKCTRL_EMI_BUSY_REF_CPU (1 << 27)
+#define CLKCTRL_EMI_BUSY_SYNC_MODE (1 << 26)
+#define CLKCTRL_EMI_BUSY_DCC_RESYNC (1 << 17)
+#define CLKCTRL_EMI_DCC_RESYNC_ENABLE (1 << 16)
+#define CLKCTRL_EMI_DIV_XTAL_MASK (0xf << 8)
+#define CLKCTRL_EMI_DIV_XTAL_OFFSET 8
+#define CLKCTRL_EMI_DIV_EMI_MASK 0x3f
+#define CLKCTRL_EMI_DIV_EMI_OFFSET 0
+
+#define CLKCTRL_SAIF0_CLKGATE (1 << 31)
+#define CLKCTRL_SAIF0_BUSY (1 << 29)
+#define CLKCTRL_SAIF0_DIV_FRAC_EN (1 << 16)
+#define CLKCTRL_SAIF0_DIV_MASK 0xffff
+#define CLKCTRL_SAIF0_DIV_OFFSET 0
+
+#define CLKCTRL_SAIF1_CLKGATE (1 << 31)
+#define CLKCTRL_SAIF1_BUSY (1 << 29)
+#define CLKCTRL_SAIF1_DIV_FRAC_EN (1 << 16)
+#define CLKCTRL_SAIF1_DIV_MASK 0xffff
+#define CLKCTRL_SAIF1_DIV_OFFSET 0
+
+#define CLKCTRL_DIS_LCDIF_CLKGATE (1 << 31)
+#define CLKCTRL_DIS_LCDIF_BUSY (1 << 29)
+#define CLKCTRL_DIS_LCDIF_DIV_FRAC_EN (1 << 13)
+#define CLKCTRL_DIS_LCDIF_DIV_MASK 0x1fff
+#define CLKCTRL_DIS_LCDIF_DIV_OFFSET 0
+
+#define CLKCTRL_ETM_CLKGATE (1 << 31)
+#define CLKCTRL_ETM_BUSY (1 << 29)
+#define CLKCTRL_ETM_DIV_FRAC_EN (1 << 7)
+#define CLKCTRL_ETM_DIV_MASK 0x7f
+#define CLKCTRL_ETM_DIV_OFFSET 0
+
+#define CLKCTRL_ENET_SLEEP (1 << 31)
+#define CLKCTRL_ENET_DISABLE (1 << 30)
+#define CLKCTRL_ENET_STATUS (1 << 29)
+#define CLKCTRL_ENET_BUSY_TIME (1 << 27)
+#define CLKCTRL_ENET_DIV_TIME_MASK (0x3f << 21)
+#define CLKCTRL_ENET_DIV_TIME_OFFSET 21
+#define CLKCTRL_ENET_TIME_SEL_MASK (0x3 << 19)
+#define CLKCTRL_ENET_TIME_SEL_OFFSET 19
+#define CLKCTRL_ENET_TIME_SEL_XTAL (0x0 << 19)
+#define CLKCTRL_ENET_TIME_SEL_PLL (0x1 << 19)
+#define CLKCTRL_ENET_TIME_SEL_RMII_CLK (0x2 << 19)
+#define CLKCTRL_ENET_TIME_SEL_UNDEFINED (0x3 << 19)
+#define CLKCTRL_ENET_CLK_OUT_EN (1 << 18)
+#define CLKCTRL_ENET_RESET_BY_SW_CHIP (1 << 17)
+#define CLKCTRL_ENET_RESET_BY_SW (1 << 16)
+
+#define CLKCTRL_HSADC_RESETB (1 << 30)
+#define CLKCTRL_HSADC_FREQDIV_MASK (0x3 << 28)
+#define CLKCTRL_HSADC_FREQDIV_OFFSET 28
+
+#define CLKCTRL_FLEXCAN_STOP_CAN0 (1 << 30)
+#define CLKCTRL_FLEXCAN_CAN0_STATUS (1 << 29)
+#define CLKCTRL_FLEXCAN_STOP_CAN1 (1 << 28)
+#define CLKCTRL_FLEXCAN_CAN1_STATUS (1 << 27)
+
+#define CLKCTRL_FRAC_CLKGATE (1 << 7)
+#define CLKCTRL_FRAC_STABLE (1 << 6)
+#define CLKCTRL_FRAC_FRAC_MASK 0x3f
+#define CLKCTRL_FRAC_FRAC_OFFSET 0
+#define CLKCTRL_FRAC0_CPU 0
+#define CLKCTRL_FRAC0_EMI 1
+#define CLKCTRL_FRAC0_IO1 2
+#define CLKCTRL_FRAC0_IO0 3
+#define CLKCTRL_FRAC1_PIX 0
+#define CLKCTRL_FRAC1_HSADC 1
+#define CLKCTRL_FRAC1_GPMI 2
+
+#define CLKCTRL_CLKSEQ_BYPASS_CPU (1 << 18)
+#define CLKCTRL_CLKSEQ_BYPASS_DIS_LCDIF (1 << 14)
+#define CLKCTRL_CLKSEQ_BYPASS_DIS_LCDIF_BYPASS (0x1 << 14)
+#define CLKCTRL_CLKSEQ_BYPASS_DIS_LCDIF_PFD (0x0 << 14)
+#define CLKCTRL_CLKSEQ_BYPASS_ETM (1 << 8)
+#define CLKCTRL_CLKSEQ_BYPASS_EMI (1 << 7)
+#define CLKCTRL_CLKSEQ_BYPASS_SSP3 (1 << 6)
+#define CLKCTRL_CLKSEQ_BYPASS_SSP2 (1 << 5)
+#define CLKCTRL_CLKSEQ_BYPASS_SSP1 (1 << 4)
+#define CLKCTRL_CLKSEQ_BYPASS_SSP0 (1 << 3)
+#define CLKCTRL_CLKSEQ_BYPASS_GPMI (1 << 2)
+#define CLKCTRL_CLKSEQ_BYPASS_SAIF1 (1 << 1)
+#define CLKCTRL_CLKSEQ_BYPASS_SAIF0 (1 << 0)
+
+#define CLKCTRL_RESET_WDOG_POR_DISABLE (1 << 5)
+#define CLKCTRL_RESET_EXTERNAL_RESET_ENABLE (1 << 4)
+#define CLKCTRL_RESET_THERMAL_RESET_ENABLE (1 << 3)
+#define CLKCTRL_RESET_THERMAL_RESET_DEFAULT (1 << 2)
+#define CLKCTRL_RESET_CHIP (1 << 1)
+#define CLKCTRL_RESET_DIG (1 << 0)
+
+#define CLKCTRL_STATUS_CPU_LIMIT_MASK (0x3 << 30)
+#define CLKCTRL_STATUS_CPU_LIMIT_OFFSET 30
+
+#define CLKCTRL_VERSION_MAJOR_MASK (0xff << 24)
+#define CLKCTRL_VERSION_MAJOR_OFFSET 24
+#define CLKCTRL_VERSION_MINOR_MASK (0xff << 16)
+#define CLKCTRL_VERSION_MINOR_OFFSET 16
+#define CLKCTRL_VERSION_STEP_MASK 0xffff
+#define CLKCTRL_VERSION_STEP_OFFSET 0
+
+#endif /* __MX28_REGS_CLKCTRL_H__ */
diff --git a/arch/arm/mach-mxs/include/mach/regs-common.h b/arch/arm/mach-mxs/include/mach/regs-common.h
new file mode 100644
index 0000000..e54a220
--- /dev/null
+++ b/arch/arm/mach-mxs/include/mach/regs-common.h
@@ -0,0 +1,69 @@
+/*
+ * Freescale i.MXS Register Accessors
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@xxxxxxxxx>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __MXS_REGS_COMMON_H__
+#define __MXS_REGS_COMMON_H__
+
+/*
+ * The i.MXS has interesting feature when it comes to register access. There
+ * are four kinds of access to one particular register. Those are:
+ *
+ * 1) Common read/write access. To use this mode, just write to the address of
+ * the register.
+ * 2) Set bits only access. To set bits, write which bits you want to set to the
+ * address of the register + 0x4.
+ * 3) Clear bits only access. To clear bits, write which bits you want to clear
+ * to the address of the register + 0x8.
+ * 4) Toggle bits only access. To toggle bits, write which bits you want to
+ * toggle to the address of the register + 0xc.
+ *
+ * IMPORTANT NOTE: Not all registers support accesses 2-4! Also, not all bits
+ * can be set/cleared by pure write as in access type 1, some need to be
+ * explicitly set/cleared by using access type 2-3.
+ *
+ * The following macros and structures allow the user to either access the
+ * register in all aforementioned modes (by accessing reg_name, reg_name_set,
+ * reg_name_clr, reg_name_tog) or pass the register structure further into
+ * various functions with correct type information (by accessing reg_name_reg).
+ *
+ */
+
+#define __mxs_reg_8(name) \
+ uint8_t name[4]; \
+ uint8_t name##_set[4]; \
+ uint8_t name##_clr[4]; \
+ uint8_t name##_tog[4]; \
+
+#define __mxs_reg_32(name) \
+ uint32_t name; \
+ uint32_t name##_set; \
+ uint32_t name##_clr; \
+ uint32_t name##_tog;
+
+struct mxs_register_8 {
+ __mxs_reg_8(reg)
+};
+
+struct mxs_register_32 {
+ __mxs_reg_32(reg)
+};
+
+#define mxs_reg_8(name) \
+ union { \
+ struct { __mxs_reg_8(name) }; \
+ struct mxs_register_8 name##_reg; \
+ };
+
+#define mxs_reg_32(name) \
+ union { \
+ struct { __mxs_reg_32(name) }; \
+ struct mxs_register_32 name##_reg; \
+ };
+
+#endif /* __MXS_REGS_COMMON_H__ */
diff --git a/arch/arm/mach-mxs/include/mach/regs-lradc.h b/arch/arm/mach-mxs/include/mach/regs-lradc.h
new file mode 100644
index 0000000..7f624be
--- /dev/null
+++ b/arch/arm/mach-mxs/include/mach/regs-lradc.h
@@ -0,0 +1,387 @@
+/*
+ * Freescale i.MX28 LRADC Register Definitions
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@xxxxxxxxx>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * Based on code from LTIB:
+ * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __MX28_REGS_LRADC_H__
+#define __MX28_REGS_LRADC_H__
+
+#include <mach/regs-common.h>
+
+#ifndef __ASSEMBLY__
+struct mxs_lradc_regs {
+ mxs_reg_32(hw_lradc_ctrl0);
+ mxs_reg_32(hw_lradc_ctrl1);
+ mxs_reg_32(hw_lradc_ctrl2);
+ mxs_reg_32(hw_lradc_ctrl3);
+ mxs_reg_32(hw_lradc_status);
+ mxs_reg_32(hw_lradc_ch0);
+ mxs_reg_32(hw_lradc_ch1);
+ mxs_reg_32(hw_lradc_ch2);
+ mxs_reg_32(hw_lradc_ch3);
+ mxs_reg_32(hw_lradc_ch4);
+ mxs_reg_32(hw_lradc_ch5);
+ mxs_reg_32(hw_lradc_ch6);
+ mxs_reg_32(hw_lradc_ch7);
+ mxs_reg_32(hw_lradc_delay0);
+ mxs_reg_32(hw_lradc_delay1);
+ mxs_reg_32(hw_lradc_delay2);
+ mxs_reg_32(hw_lradc_delay3);
+ mxs_reg_32(hw_lradc_debug0);
+ mxs_reg_32(hw_lradc_debug1);
+ mxs_reg_32(hw_lradc_conversion);
+ mxs_reg_32(hw_lradc_ctrl4);
+ mxs_reg_32(hw_lradc_treshold0);
+ mxs_reg_32(hw_lradc_treshold1);
+ mxs_reg_32(hw_lradc_version);
+};
+#endif
+
+#define LRADC_CTRL0_SFTRST (1 << 31)
+#define LRADC_CTRL0_CLKGATE (1 << 30)
+#define LRADC_CTRL0_ONCHIP_GROUNDREF (1 << 26)
+#define LRADC_CTRL0_BUTTON1_DETECT_ENABLE (1 << 25)
+#define LRADC_CTRL0_BUTTON0_DETECT_ENABLE (1 << 24)
+#define LRADC_CTRL0_TOUCH_DETECT_ENABLE (1 << 23)
+#define LRADC_CTRL0_TOUCH_SCREEN_TYPE (1 << 22)
+#define LRADC_CTRL0_YNLRSW (1 << 21)
+#define LRADC_CTRL0_YPLLSW_MASK (0x3 << 19)
+#define LRADC_CTRL0_YPLLSW_OFFSET 19
+#define LRADC_CTRL0_XNURSW_MASK (0x3 << 17)
+#define LRADC_CTRL0_XNURSW_OFFSET 17
+#define LRADC_CTRL0_XPULSW (1 << 16)
+#define LRADC_CTRL0_SCHEDULE_MASK 0xff
+#define LRADC_CTRL0_SCHEDULE_OFFSET 0
+
+#define LRADC_CTRL1_BUTTON1_DETECT_IRQ_EN (1 << 28)
+#define LRADC_CTRL1_BUTTON0_DETECT_IRQ_EN (1 << 27)
+#define LRADC_CTRL1_THRESHOLD1_DETECT_IRQ_EN (1 << 26)
+#define LRADC_CTRL1_THRESHOLD0_DETECT_IRQ_EN (1 << 25)
+#define LRADC_CTRL1_TOUCH_DETECT_IRQ_EN (1 << 24)
+#define LRADC_CTRL1_LRADC7_IRQ_EN (1 << 23)
+#define LRADC_CTRL1_LRADC6_IRQ_EN (1 << 22)
+#define LRADC_CTRL1_LRADC5_IRQ_EN (1 << 21)
+#define LRADC_CTRL1_LRADC4_IRQ_EN (1 << 20)
+#define LRADC_CTRL1_LRADC3_IRQ_EN (1 << 19)
+#define LRADC_CTRL1_LRADC2_IRQ_EN (1 << 18)
+#define LRADC_CTRL1_LRADC1_IRQ_EN (1 << 17)
+#define LRADC_CTRL1_LRADC0_IRQ_EN (1 << 16)
+#define LRADC_CTRL1_BUTTON1_DETECT_IRQ (1 << 12)
+#define LRADC_CTRL1_BUTTON0_DETECT_IRQ (1 << 11)
+#define LRADC_CTRL1_THRESHOLD1_DETECT_IRQ (1 << 10)
+#define LRADC_CTRL1_THRESHOLD0_DETECT_IRQ (1 << 9)
+#define LRADC_CTRL1_TOUCH_DETECT_IRQ (1 << 8)
+#define LRADC_CTRL1_LRADC7_IRQ (1 << 7)
+#define LRADC_CTRL1_LRADC6_IRQ (1 << 6)
+#define LRADC_CTRL1_LRADC5_IRQ (1 << 5)
+#define LRADC_CTRL1_LRADC4_IRQ (1 << 4)
+#define LRADC_CTRL1_LRADC3_IRQ (1 << 3)
+#define LRADC_CTRL1_LRADC2_IRQ (1 << 2)
+#define LRADC_CTRL1_LRADC1_IRQ (1 << 1)
+#define LRADC_CTRL1_LRADC0_IRQ (1 << 0)
+
+#define LRADC_CTRL2_DIVIDE_BY_TWO_MASK (0xff << 24)
+#define LRADC_CTRL2_DIVIDE_BY_TWO_OFFSET 24
+#define LRADC_CTRL2_TEMPSENSE_PWD (1 << 15)
+#define LRADC_CTRL2_VTHSENSE_MASK (0x3 << 13)
+#define LRADC_CTRL2_VTHSENSE_OFFSET 13
+#define LRADC_CTRL2_DISABLE_MUXAMP_BYPASS (1 << 12)
+#define LRADC_CTRL2_TEMP_SENSOR_IENABLE1 (1 << 9)
+#define LRADC_CTRL2_TEMP_SENSOR_IENABLE0 (1 << 8)
+#define LRADC_CTRL2_TEMP_ISRC1_MASK (0xf << 4)
+#define LRADC_CTRL2_TEMP_ISRC1_OFFSET 4
+#define LRADC_CTRL2_TEMP_ISRC1_300 (0xf << 4)
+#define LRADC_CTRL2_TEMP_ISRC1_280 (0xe << 4)
+#define LRADC_CTRL2_TEMP_ISRC1_260 (0xd << 4)
+#define LRADC_CTRL2_TEMP_ISRC1_240 (0xc << 4)
+#define LRADC_CTRL2_TEMP_ISRC1_220 (0xb << 4)
+#define LRADC_CTRL2_TEMP_ISRC1_200 (0xa << 4)
+#define LRADC_CTRL2_TEMP_ISRC1_180 (0x9 << 4)
+#define LRADC_CTRL2_TEMP_ISRC1_160 (0x8 << 4)
+#define LRADC_CTRL2_TEMP_ISRC1_140 (0x7 << 4)
+#define LRADC_CTRL2_TEMP_ISRC1_120 (0x6 << 4)
+#define LRADC_CTRL2_TEMP_ISRC1_100 (0x5 << 4)
+#define LRADC_CTRL2_TEMP_ISRC1_80 (0x4 << 4)
+#define LRADC_CTRL2_TEMP_ISRC1_60 (0x3 << 4)
+#define LRADC_CTRL2_TEMP_ISRC1_40 (0x2 << 4)
+#define LRADC_CTRL2_TEMP_ISRC1_20 (0x1 << 4)
+#define LRADC_CTRL2_TEMP_ISRC1_ZERO (0x0 << 4)
+#define LRADC_CTRL2_TEMP_ISRC0_MASK (0xf << 0)
+#define LRADC_CTRL2_TEMP_ISRC0_OFFSET 0
+#define LRADC_CTRL2_TEMP_ISRC0_300 (0xf << 0)
+#define LRADC_CTRL2_TEMP_ISRC0_280 (0xe << 0)
+#define LRADC_CTRL2_TEMP_ISRC0_260 (0xd << 0)
+#define LRADC_CTRL2_TEMP_ISRC0_240 (0xc << 0)
+#define LRADC_CTRL2_TEMP_ISRC0_220 (0xb << 0)
+#define LRADC_CTRL2_TEMP_ISRC0_200 (0xa << 0)
+#define LRADC_CTRL2_TEMP_ISRC0_180 (0x9 << 0)
+#define LRADC_CTRL2_TEMP_ISRC0_160 (0x8 << 0)
+#define LRADC_CTRL2_TEMP_ISRC0_140 (0x7 << 0)
+#define LRADC_CTRL2_TEMP_ISRC0_120 (0x6 << 0)
+#define LRADC_CTRL2_TEMP_ISRC0_100 (0x5 << 0)
+#define LRADC_CTRL2_TEMP_ISRC0_80 (0x4 << 0)
+#define LRADC_CTRL2_TEMP_ISRC0_60 (0x3 << 0)
+#define LRADC_CTRL2_TEMP_ISRC0_40 (0x2 << 0)
+#define LRADC_CTRL2_TEMP_ISRC0_20 (0x1 << 0)
+#define LRADC_CTRL2_TEMP_ISRC0_ZERO (0x0 << 0)
+
+#define LRADC_CTRL3_DISCARD_MASK (0x3 << 24)
+#define LRADC_CTRL3_DISCARD_OFFSET 24
+#define LRADC_CTRL3_DISCARD_1_SAMPLE (0x1 << 24)
+#define LRADC_CTRL3_DISCARD_2_SAMPLES (0x2 << 24)
+#define LRADC_CTRL3_DISCARD_3_SAMPLES (0x3 << 24)
+#define LRADC_CTRL3_FORCE_ANALOG_PWUP (1 << 23)
+#define LRADC_CTRL3_FORCE_ANALOG_PWDN (1 << 22)
+#define LRADC_CTRL3_CYCLE_TIME_MASK (0x3 << 8)
+#define LRADC_CTRL3_CYCLE_TIME_OFFSET 8
+#define LRADC_CTRL3_CYCLE_TIME_6MHZ (0x0 << 8)
+#define LRADC_CTRL3_CYCLE_TIME_4MHZ (0x1 << 8)
+#define LRADC_CTRL3_CYCLE_TIME_3MHZ (0x2 << 8)
+#define LRADC_CTRL3_CYCLE_TIME_2MHZ (0x3 << 8)
+#define LRADC_CTRL3_HIGH_TIME_MASK (0x3 << 4)
+#define LRADC_CTRL3_HIGH_TIME_OFFSET 4
+#define LRADC_CTRL3_HIGH_TIME_42NS (0x0 << 4)
+#define LRADC_CTRL3_HIGH_TIME_83NS (0x1 << 4)
+#define LRADC_CTRL3_HIGH_TIME_125NS (0x2 << 4)
+#define LRADC_CTRL3_HIGH_TIME_250NS (0x3 << 4)
+#define LRADC_CTRL3_DELAY_CLOCK (1 << 1)
+#define LRADC_CTRL3_INVERT_CLOCK (1 << 0)
+
+#define LRADC_STATUS_BUTTON1_PRESENT (1 << 28)
+#define LRADC_STATUS_BUTTON0_PRESENT (1 << 27)
+#define LRADC_STATUS_TEMP1_PRESENT (1 << 26)
+#define LRADC_STATUS_TEMP0_PRESENT (1 << 25)
+#define LRADC_STATUS_TOUCH_PANEL_PRESENT (1 << 24)
+#define LRADC_STATUS_CHANNEL7_PRESENT (1 << 23)
+#define LRADC_STATUS_CHANNEL6_PRESENT (1 << 22)
+#define LRADC_STATUS_CHANNEL5_PRESENT (1 << 21)
+#define LRADC_STATUS_CHANNEL4_PRESENT (1 << 20)
+#define LRADC_STATUS_CHANNEL3_PRESENT (1 << 19)
+#define LRADC_STATUS_CHANNEL2_PRESENT (1 << 18)
+#define LRADC_STATUS_CHANNEL1_PRESENT (1 << 17)
+#define LRADC_STATUS_CHANNEL0_PRESENT (1 << 16)
+#define LRADC_STATUS_BUTTON1_DETECT_RAW (1 << 2)
+#define LRADC_STATUS_BUTTON0_DETECT_RAW (1 << 1)
+#define LRADC_STATUS_TOUCH_DETECT_RAW (1 << 0)
+
+#define LRADC_CH_TOGGLE (1 << 31)
+#define LRADC_CH7_TESTMODE_TOGGLE (1 << 30)
+#define LRADC_CH_ACCUMULATE (1 << 29)
+#define LRADC_CH_NUM_SAMPLES_MASK (0x1f << 24)
+#define LRADC_CH_NUM_SAMPLES_OFFSET 24
+#define LRADC_CH_VALUE_MASK 0x3ffff
+#define LRADC_CH_VALUE_OFFSET 0
+
+#define LRADC_DELAY_TRIGGER_LRADCS_MASK (0xff << 24)
+#define LRADC_DELAY_TRIGGER_LRADCS_OFFSET 24
+#define LRADC_DELAY_KICK (1 << 20)
+#define LRADC_DELAY_TRIGGER_DELAYS_MASK (0xf << 16)
+#define LRADC_DELAY_TRIGGER_DELAYS_OFFSET 16
+#define LRADC_DELAY_LOOP_COUNT_MASK (0x1f << 11)
+#define LRADC_DELAY_LOOP_COUNT_OFFSET 11
+#define LRADC_DELAY_DELAY_MASK 0x7ff
+#define LRADC_DELAY_DELAY_OFFSET 0
+
+#define LRADC_DEBUG0_READONLY_MASK (0xffff << 16)
+#define LRADC_DEBUG0_READONLY_OFFSET 16
+#define LRADC_DEBUG0_STATE_MASK (0xfff << 0)
+#define LRADC_DEBUG0_STATE_OFFSET 0
+
+#define LRADC_DEBUG1_REQUEST_MASK (0xff << 16)
+#define LRADC_DEBUG1_REQUEST_OFFSET 16
+#define LRADC_DEBUG1_TESTMODE_COUNT_MASK (0x1f << 8)
+#define LRADC_DEBUG1_TESTMODE_COUNT_OFFSET 8
+#define LRADC_DEBUG1_TESTMODE6 (1 << 2)
+#define LRADC_DEBUG1_TESTMODE5 (1 << 1)
+#define LRADC_DEBUG1_TESTMODE (1 << 0)
+
+#define LRADC_CONVERSION_AUTOMATIC (1 << 20)
+#define LRADC_CONVERSION_SCALE_FACTOR_MASK (0x3 << 16)
+#define LRADC_CONVERSION_SCALE_FACTOR_OFFSET 16
+#define LRADC_CONVERSION_SCALE_FACTOR_NIMH (0x0 << 16)
+#define LRADC_CONVERSION_SCALE_FACTOR_DUAL_NIMH (0x1 << 16)
+#define LRADC_CONVERSION_SCALE_FACTOR_LI_ION (0x2 << 16)
+#define LRADC_CONVERSION_SCALE_FACTOR_ALT_LI_ION (0x3 << 16)
+#define LRADC_CONVERSION_SCALED_BATT_VOLTAGE_MASK 0x3ff
+#define LRADC_CONVERSION_SCALED_BATT_VOLTAGE_OFFSET 0
+
+#define LRADC_CTRL4_LRADC7SELECT_MASK (0xf << 28)
+#define LRADC_CTRL4_LRADC7SELECT_OFFSET 28
+#define LRADC_CTRL4_LRADC7SELECT_CHANNEL0 (0x0 << 28)
+#define LRADC_CTRL4_LRADC7SELECT_CHANNEL1 (0x1 << 28)
+#define LRADC_CTRL4_LRADC7SELECT_CHANNEL2 (0x2 << 28)
+#define LRADC_CTRL4_LRADC7SELECT_CHANNEL3 (0x3 << 28)
+#define LRADC_CTRL4_LRADC7SELECT_CHANNEL4 (0x4 << 28)
+#define LRADC_CTRL4_LRADC7SELECT_CHANNEL5 (0x5 << 28)
+#define LRADC_CTRL4_LRADC7SELECT_CHANNEL6 (0x6 << 28)
+#define LRADC_CTRL4_LRADC7SELECT_CHANNEL7 (0x7 << 28)
+#define LRADC_CTRL4_LRADC7SELECT_CHANNEL8 (0x8 << 28)
+#define LRADC_CTRL4_LRADC7SELECT_CHANNEL9 (0x9 << 28)
+#define LRADC_CTRL4_LRADC7SELECT_CHANNEL10 (0xa << 28)
+#define LRADC_CTRL4_LRADC7SELECT_CHANNEL11 (0xb << 28)
+#define LRADC_CTRL4_LRADC7SELECT_CHANNEL12 (0xc << 28)
+#define LRADC_CTRL4_LRADC7SELECT_CHANNEL13 (0xd << 28)
+#define LRADC_CTRL4_LRADC7SELECT_CHANNEL14 (0xe << 28)
+#define LRADC_CTRL4_LRADC7SELECT_CHANNEL15 (0xf << 28)
+#define LRADC_CTRL4_LRADC6SELECT_MASK (0xf << 24)
+#define LRADC_CTRL4_LRADC6SELECT_OFFSET 24
+#define LRADC_CTRL4_LRADC6SELECT_CHANNEL0 (0x0 << 24)
+#define LRADC_CTRL4_LRADC6SELECT_CHANNEL1 (0x1 << 24)
+#define LRADC_CTRL4_LRADC6SELECT_CHANNEL2 (0x2 << 24)
+#define LRADC_CTRL4_LRADC6SELECT_CHANNEL3 (0x3 << 24)
+#define LRADC_CTRL4_LRADC6SELECT_CHANNEL4 (0x4 << 24)
+#define LRADC_CTRL4_LRADC6SELECT_CHANNEL5 (0x5 << 24)
+#define LRADC_CTRL4_LRADC6SELECT_CHANNEL6 (0x6 << 24)
+#define LRADC_CTRL4_LRADC6SELECT_CHANNEL7 (0x7 << 24)
+#define LRADC_CTRL4_LRADC6SELECT_CHANNEL8 (0x8 << 24)
+#define LRADC_CTRL4_LRADC6SELECT_CHANNEL9 (0x9 << 24)
+#define LRADC_CTRL4_LRADC6SELECT_CHANNEL10 (0xa << 24)
+#define LRADC_CTRL4_LRADC6SELECT_CHANNEL11 (0xb << 24)
+#define LRADC_CTRL4_LRADC6SELECT_CHANNEL12 (0xc << 24)
+#define LRADC_CTRL4_LRADC6SELECT_CHANNEL13 (0xd << 24)
+#define LRADC_CTRL4_LRADC6SELECT_CHANNEL14 (0xe << 24)
+#define LRADC_CTRL4_LRADC6SELECT_CHANNEL15 (0xf << 24)
+#define LRADC_CTRL4_LRADC5SELECT_MASK (0xf << 20)
+#define LRADC_CTRL4_LRADC5SELECT_OFFSET 20
+#define LRADC_CTRL4_LRADC5SELECT_CHANNEL0 (0x0 << 20)
+#define LRADC_CTRL4_LRADC5SELECT_CHANNEL1 (0x1 << 20)
+#define LRADC_CTRL4_LRADC5SELECT_CHANNEL2 (0x2 << 20)
+#define LRADC_CTRL4_LRADC5SELECT_CHANNEL3 (0x3 << 20)
+#define LRADC_CTRL4_LRADC5SELECT_CHANNEL4 (0x4 << 20)
+#define LRADC_CTRL4_LRADC5SELECT_CHANNEL5 (0x5 << 20)
+#define LRADC_CTRL4_LRADC5SELECT_CHANNEL6 (0x6 << 20)
+#define LRADC_CTRL4_LRADC5SELECT_CHANNEL7 (0x7 << 20)
+#define LRADC_CTRL4_LRADC5SELECT_CHANNEL8 (0x8 << 20)
+#define LRADC_CTRL4_LRADC5SELECT_CHANNEL9 (0x9 << 20)
+#define LRADC_CTRL4_LRADC5SELECT_CHANNEL10 (0xa << 20)
+#define LRADC_CTRL4_LRADC5SELECT_CHANNEL11 (0xb << 20)
+#define LRADC_CTRL4_LRADC5SELECT_CHANNEL12 (0xc << 20)
+#define LRADC_CTRL4_LRADC5SELECT_CHANNEL13 (0xd << 20)
+#define LRADC_CTRL4_LRADC5SELECT_CHANNEL14 (0xe << 20)
+#define LRADC_CTRL4_LRADC5SELECT_CHANNEL15 (0xf << 20)
+#define LRADC_CTRL4_LRADC4SELECT_MASK (0xf << 16)
+#define LRADC_CTRL4_LRADC4SELECT_OFFSET 16
+#define LRADC_CTRL4_LRADC4SELECT_CHANNEL0 (0x0 << 16)
+#define LRADC_CTRL4_LRADC4SELECT_CHANNEL1 (0x1 << 16)
+#define LRADC_CTRL4_LRADC4SELECT_CHANNEL2 (0x2 << 16)
+#define LRADC_CTRL4_LRADC4SELECT_CHANNEL3 (0x3 << 16)
+#define LRADC_CTRL4_LRADC4SELECT_CHANNEL4 (0x4 << 16)
+#define LRADC_CTRL4_LRADC4SELECT_CHANNEL5 (0x5 << 16)
+#define LRADC_CTRL4_LRADC4SELECT_CHANNEL6 (0x6 << 16)
+#define LRADC_CTRL4_LRADC4SELECT_CHANNEL7 (0x7 << 16)
+#define LRADC_CTRL4_LRADC4SELECT_CHANNEL8 (0x8 << 16)
+#define LRADC_CTRL4_LRADC4SELECT_CHANNEL9 (0x9 << 16)
+#define LRADC_CTRL4_LRADC4SELECT_CHANNEL10 (0xa << 16)
+#define LRADC_CTRL4_LRADC4SELECT_CHANNEL11 (0xb << 16)
+#define LRADC_CTRL4_LRADC4SELECT_CHANNEL12 (0xc << 16)
+#define LRADC_CTRL4_LRADC4SELECT_CHANNEL13 (0xd << 16)
+#define LRADC_CTRL4_LRADC4SELECT_CHANNEL14 (0xe << 16)
+#define LRADC_CTRL4_LRADC4SELECT_CHANNEL15 (0xf << 16)
+#define LRADC_CTRL4_LRADC3SELECT_MASK (0xf << 12)
+#define LRADC_CTRL4_LRADC3SELECT_OFFSET 12
+#define LRADC_CTRL4_LRADC3SELECT_CHANNEL0 (0x0 << 12)
+#define LRADC_CTRL4_LRADC3SELECT_CHANNEL1 (0x1 << 12)
+#define LRADC_CTRL4_LRADC3SELECT_CHANNEL2 (0x2 << 12)
+#define LRADC_CTRL4_LRADC3SELECT_CHANNEL3 (0x3 << 12)
+#define LRADC_CTRL4_LRADC3SELECT_CHANNEL4 (0x4 << 12)
+#define LRADC_CTRL4_LRADC3SELECT_CHANNEL5 (0x5 << 12)
+#define LRADC_CTRL4_LRADC3SELECT_CHANNEL6 (0x6 << 12)
+#define LRADC_CTRL4_LRADC3SELECT_CHANNEL7 (0x7 << 12)
+#define LRADC_CTRL4_LRADC3SELECT_CHANNEL8 (0x8 << 12)
+#define LRADC_CTRL4_LRADC3SELECT_CHANNEL9 (0x9 << 12)
+#define LRADC_CTRL4_LRADC3SELECT_CHANNEL10 (0xa << 12)
+#define LRADC_CTRL4_LRADC3SELECT_CHANNEL11 (0xb << 12)
+#define LRADC_CTRL4_LRADC3SELECT_CHANNEL12 (0xc << 12)
+#define LRADC_CTRL4_LRADC3SELECT_CHANNEL13 (0xd << 12)
+#define LRADC_CTRL4_LRADC3SELECT_CHANNEL14 (0xe << 12)
+#define LRADC_CTRL4_LRADC3SELECT_CHANNEL15 (0xf << 12)
+#define LRADC_CTRL4_LRADC2SELECT_MASK (0xf << 8)
+#define LRADC_CTRL4_LRADC2SELECT_OFFSET 8
+#define LRADC_CTRL4_LRADC2SELECT_CHANNEL0 (0x0 << 8)
+#define LRADC_CTRL4_LRADC2SELECT_CHANNEL1 (0x1 << 8)
+#define LRADC_CTRL4_LRADC2SELECT_CHANNEL2 (0x2 << 8)
+#define LRADC_CTRL4_LRADC2SELECT_CHANNEL3 (0x3 << 8)
+#define LRADC_CTRL4_LRADC2SELECT_CHANNEL4 (0x4 << 8)
+#define LRADC_CTRL4_LRADC2SELECT_CHANNEL5 (0x5 << 8)
+#define LRADC_CTRL4_LRADC2SELECT_CHANNEL6 (0x6 << 8)
+#define LRADC_CTRL4_LRADC2SELECT_CHANNEL7 (0x7 << 8)
+#define LRADC_CTRL4_LRADC2SELECT_CHANNEL8 (0x8 << 8)
+#define LRADC_CTRL4_LRADC2SELECT_CHANNEL9 (0x9 << 8)
+#define LRADC_CTRL4_LRADC2SELECT_CHANNEL10 (0xa << 8)
+#define LRADC_CTRL4_LRADC2SELECT_CHANNEL11 (0xb << 8)
+#define LRADC_CTRL4_LRADC2SELECT_CHANNEL12 (0xc << 8)
+#define LRADC_CTRL4_LRADC2SELECT_CHANNEL13 (0xd << 8)
+#define LRADC_CTRL4_LRADC2SELECT_CHANNEL14 (0xe << 8)
+#define LRADC_CTRL4_LRADC2SELECT_CHANNEL15 (0xf << 8)
+#define LRADC_CTRL4_LRADC1SELECT_MASK (0xf << 4)
+#define LRADC_CTRL4_LRADC1SELECT_OFFSET 4
+#define LRADC_CTRL4_LRADC1SELECT_CHANNEL0 (0x0 << 4)
+#define LRADC_CTRL4_LRADC1SELECT_CHANNEL1 (0x1 << 4)
+#define LRADC_CTRL4_LRADC1SELECT_CHANNEL2 (0x2 << 4)
+#define LRADC_CTRL4_LRADC1SELECT_CHANNEL3 (0x3 << 4)
+#define LRADC_CTRL4_LRADC1SELECT_CHANNEL4 (0x4 << 4)
+#define LRADC_CTRL4_LRADC1SELECT_CHANNEL5 (0x5 << 4)
+#define LRADC_CTRL4_LRADC1SELECT_CHANNEL6 (0x6 << 4)
+#define LRADC_CTRL4_LRADC1SELECT_CHANNEL7 (0x7 << 4)
+#define LRADC_CTRL4_LRADC1SELECT_CHANNEL8 (0x8 << 4)
+#define LRADC_CTRL4_LRADC1SELECT_CHANNEL9 (0x9 << 4)
+#define LRADC_CTRL4_LRADC1SELECT_CHANNEL10 (0xa << 4)
+#define LRADC_CTRL4_LRADC1SELECT_CHANNEL11 (0xb << 4)
+#define LRADC_CTRL4_LRADC1SELECT_CHANNEL12 (0xc << 4)
+#define LRADC_CTRL4_LRADC1SELECT_CHANNEL13 (0xd << 4)
+#define LRADC_CTRL4_LRADC1SELECT_CHANNEL14 (0xe << 4)
+#define LRADC_CTRL4_LRADC1SELECT_CHANNEL15 (0xf << 4)
+#define LRADC_CTRL4_LRADC0SELECT_MASK 0xf
+#define LRADC_CTRL4_LRADC0SELECT_CHANNEL0 (0x0 << 0)
+#define LRADC_CTRL4_LRADC0SELECT_CHANNEL1 (0x1 << 0)
+#define LRADC_CTRL4_LRADC0SELECT_CHANNEL2 (0x2 << 0)
+#define LRADC_CTRL4_LRADC0SELECT_CHANNEL3 (0x3 << 0)
+#define LRADC_CTRL4_LRADC0SELECT_CHANNEL4 (0x4 << 0)
+#define LRADC_CTRL4_LRADC0SELECT_CHANNEL5 (0x5 << 0)
+#define LRADC_CTRL4_LRADC0SELECT_CHANNEL6 (0x6 << 0)
+#define LRADC_CTRL4_LRADC0SELECT_CHANNEL7 (0x7 << 0)
+#define LRADC_CTRL4_LRADC0SELECT_CHANNEL8 (0x8 << 0)
+#define LRADC_CTRL4_LRADC0SELECT_CHANNEL9 (0x9 << 0)
+#define LRADC_CTRL4_LRADC0SELECT_CHANNEL10 (0xa << 0)
+#define LRADC_CTRL4_LRADC0SELECT_CHANNEL11 (0xb << 0)
+#define LRADC_CTRL4_LRADC0SELECT_CHANNEL12 (0xc << 0)
+#define LRADC_CTRL4_LRADC0SELECT_CHANNEL13 (0xd << 0)
+#define LRADC_CTRL4_LRADC0SELECT_CHANNEL14 (0xe << 0)
+#define LRADC_CTRL4_LRADC0SELECT_CHANNEL15 (0xf << 0)
+
+#define LRADC_THRESHOLD_ENABLE (1 << 24)
+#define LRADC_THRESHOLD_BATTCHRG_DISABLE (1 << 23)
+#define LRADC_THRESHOLD_CHANNEL_SEL_MASK (0x7 << 20)
+#define LRADC_THRESHOLD_CHANNEL_SEL_OFFSET 20
+#define LRADC_THRESHOLD_CHANNEL_SEL_CHANNEL0 (0x0 << 20)
+#define LRADC_THRESHOLD_CHANNEL_SEL_CHANNEL1 (0x1 << 20)
+#define LRADC_THRESHOLD_CHANNEL_SEL_CHANNEL2 (0x2 << 20)
+#define LRADC_THRESHOLD_CHANNEL_SEL_CHANNEL3 (0x3 << 20)
+#define LRADC_THRESHOLD_CHANNEL_SEL_CHANNEL4 (0x4 << 20)
+#define LRADC_THRESHOLD_CHANNEL_SEL_CHANNEL5 (0x5 << 20)
+#define LRADC_THRESHOLD_CHANNEL_SEL_CHANNEL6 (0x6 << 20)
+#define LRADC_THRESHOLD_CHANNEL_SEL_CHANNEL7 (0x7 << 20)
+#define LRADC_THRESHOLD_SETTING_MASK (0x3 << 18)
+#define LRADC_THRESHOLD_SETTING_OFFSET 18
+#define LRADC_THRESHOLD_SETTING_NO_COMPARE (0x0 << 18)
+#define LRADC_THRESHOLD_SETTING_DETECT_LOW (0x1 << 18)
+#define LRADC_THRESHOLD_SETTING_DETECT_HIGH (0x2 << 18)
+#define LRADC_THRESHOLD_SETTING_RESERVED (0x3 << 18)
+#define LRADC_THRESHOLD_VALUE_MASK 0x3ffff
+#define LRADC_THRESHOLD_VALUE_OFFSET 0
+
+#define LRADC_VERSION_MAJOR_MASK (0xff << 24)
+#define LRADC_VERSION_MAJOR_OFFSET 24
+#define LRADC_VERSION_MINOR_MASK (0xff << 16)
+#define LRADC_VERSION_MINOR_OFFSET 16
+#define LRADC_VERSION_STEP_MASK 0xffff
+#define LRADC_VERSION_STEP_OFFSET 0
+
+#endif /* __MX28_REGS_LRADC_H__ */
diff --git a/arch/arm/mach-mxs/include/mach/regs-power-mx28.h b/arch/arm/mach-mxs/include/mach/regs-power-mx28.h
new file mode 100644
index 0000000..7b73496
--- /dev/null
+++ b/arch/arm/mach-mxs/include/mach/regs-power-mx28.h
@@ -0,0 +1,408 @@
+/*
+ * Freescale i.MX28 Power Controller Register Definitions
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@xxxxxxxxx>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __MX28_REGS_POWER_H__
+#define __MX28_REGS_POWER_H__
+
+#include <mach/regs-common.h>
+
+#ifndef __ASSEMBLY__
+struct mxs_power_regs {
+ mxs_reg_32(hw_power_ctrl)
+ mxs_reg_32(hw_power_5vctrl)
+ mxs_reg_32(hw_power_minpwr)
+ mxs_reg_32(hw_power_charge)
+ uint32_t hw_power_vdddctrl;
+ uint32_t reserved_vddd[3];
+ uint32_t hw_power_vddactrl;
+ uint32_t reserved_vdda[3];
+ uint32_t hw_power_vddioctrl;
+ uint32_t reserved_vddio[3];
+ uint32_t hw_power_vddmemctrl;
+ uint32_t reserved_vddmem[3];
+ uint32_t hw_power_dcdc4p2;
+ uint32_t reserved_dcdc4p2[3];
+ uint32_t hw_power_misc;
+ uint32_t reserved_misc[3];
+ uint32_t hw_power_dclimits;
+ uint32_t reserved_dclimits[3];
+ mxs_reg_32(hw_power_loopctrl)
+ uint32_t hw_power_sts;
+ uint32_t reserved_sts[3];
+ mxs_reg_32(hw_power_speed)
+ uint32_t hw_power_battmonitor;
+ uint32_t reserved_battmonitor[3];
+
+ uint32_t reserved[4];
+
+ mxs_reg_32(hw_power_reset)
+};
+#endif
+
+#define MX23_POWER_CTRL_CLKGATE (1 << 30)
+#define POWER_CTRL_PSWITCH_MID_TRAN (1 << 27)
+#define POWER_CTRL_DCDC4P2_BO_IRQ (1 << 24)
+#define POWER_CTRL_ENIRQ_DCDC4P2_BO (1 << 23)
+#define POWER_CTRL_VDD5V_DROOP_IRQ (1 << 22)
+#define POWER_CTRL_ENIRQ_VDD5V_DROOP (1 << 21)
+#define POWER_CTRL_PSWITCH_IRQ (1 << 20)
+#define POWER_CTRL_PSWITCH_IRQ_SRC (1 << 19)
+#define POWER_CTRL_POLARITY_PSWITCH (1 << 18)
+#define POWER_CTRL_ENIRQ_PSWITCH (1 << 17)
+#define POWER_CTRL_POLARITY_DC_OK (1 << 16)
+#define POWER_CTRL_DC_OK_IRQ (1 << 15)
+#define POWER_CTRL_ENIRQ_DC_OK (1 << 14)
+#define POWER_CTRL_BATT_BO_IRQ (1 << 13)
+#define POWER_CTRL_ENIRQ_BATT_BO (1 << 12)
+#define POWER_CTRL_VDDIO_BO_IRQ (1 << 11)
+#define POWER_CTRL_ENIRQ_VDDIO_BO (1 << 10)
+#define POWER_CTRL_VDDA_BO_IRQ (1 << 9)
+#define POWER_CTRL_ENIRQ_VDDA_BO (1 << 8)
+#define POWER_CTRL_VDDD_BO_IRQ (1 << 7)
+#define POWER_CTRL_ENIRQ_VDDD_BO (1 << 6)
+#define POWER_CTRL_POLARITY_VBUSVALID (1 << 5)
+#define POWER_CTRL_VBUS_VALID_IRQ (1 << 4)
+#define POWER_CTRL_ENIRQ_VBUS_VALID (1 << 3)
+#define POWER_CTRL_POLARITY_VDD5V_GT_VDDIO (1 << 2)
+#define POWER_CTRL_VDD5V_GT_VDDIO_IRQ (1 << 1)
+#define POWER_CTRL_ENIRQ_VDD5V_GT_VDDIO (1 << 0)
+
+#define MX28_POWER_5VCTRL_VBUSDROOP_TRSH_MASK (0x3 << 30)
+#define MX28_POWER_5VCTRL_VBUSDROOP_TRSH_OFFSET 30
+#define MX28_POWER_5VCTRL_VBUSDROOP_TRSH_4V3 (0x0 << 30)
+#define MX28_POWER_5VCTRL_VBUSDROOP_TRSH_4V4 (0x1 << 30)
+#define MX28_POWER_5VCTRL_VBUSDROOP_TRSH_4V5 (0x2 << 30)
+#define MX28_POWER_5VCTRL_VBUSDROOP_TRSH_4V7 (0x3 << 30)
+
+#define MX23_POWER_5VCTRL_VBUSDROOP_TRSH_MASK (0x3 << 28)
+#define MX23_POWER_5VCTRL_VBUSDROOP_TRSH_OFFSET 28
+#define MX23_POWER_5VCTRL_VBUSDROOP_TRSH_4V3 (0x0 << 28)
+#define MX23_POWER_5VCTRL_VBUSDROOP_TRSH_4V4 (0x1 << 28)
+#define MX23_POWER_5VCTRL_VBUSDROOP_TRSH_4V5 (0x2 << 28)
+#define MX23_POWER_5VCTRL_VBUSDROOP_TRSH_4V7 (0x3 << 28)
+
+#define POWER_5VCTRL_HEADROOM_ADJ_MASK (0x7 << 24)
+#define POWER_5VCTRL_HEADROOM_ADJ_OFFSET 24
+#define MX28_POWER_5VCTRL_PWD_CHARGE_4P2_MASK (0x3 << 20)
+#define MX23_POWER_5VCTRL_PWD_CHARGE_4P2_MASK (0x1 << 20)
+#define POWER_5VCTRL_PWD_CHARGE_4P2_OFFSET 20
+#define POWER_5VCTRL_CHARGE_4P2_ILIMIT_MASK (0x3f << 12)
+#define POWER_5VCTRL_CHARGE_4P2_ILIMIT_OFFSET 12
+#define POWER_5VCTRL_VBUSVALID_TRSH_MASK (0x7 << 8)
+#define POWER_5VCTRL_VBUSVALID_TRSH_OFFSET 8
+#define POWER_5VCTRL_VBUSVALID_TRSH_2V9 (0x0 << 8)
+#define POWER_5VCTRL_VBUSVALID_TRSH_4V0 (0x1 << 8)
+#define POWER_5VCTRL_VBUSVALID_TRSH_4V1 (0x2 << 8)
+#define POWER_5VCTRL_VBUSVALID_TRSH_4V2 (0x3 << 8)
+#define POWER_5VCTRL_VBUSVALID_TRSH_4V3 (0x4 << 8)
+#define POWER_5VCTRL_VBUSVALID_TRSH_4V4 (0x5 << 8)
+#define POWER_5VCTRL_VBUSVALID_TRSH_4V5 (0x6 << 8)
+#define POWER_5VCTRL_VBUSVALID_TRSH_4V6 (0x7 << 8)
+#define POWER_5VCTRL_PWDN_5VBRNOUT (1 << 7)
+#define POWER_5VCTRL_ENABLE_LINREG_ILIMIT (1 << 6)
+#define POWER_5VCTRL_DCDC_XFER (1 << 5)
+#define POWER_5VCTRL_VBUSVALID_5VDETECT (1 << 4)
+#define POWER_5VCTRL_VBUSVALID_TO_B (1 << 3)
+#define POWER_5VCTRL_ILIMIT_EQ_ZERO (1 << 2)
+#define POWER_5VCTRL_PWRUP_VBUS_CMPS (1 << 1)
+#define POWER_5VCTRL_ENABLE_DCDC (1 << 0)
+
+#define POWER_MINPWR_LOWPWR_4P2 (1 << 14)
+#define MX23_POWER_MINPWR_VDAC_DUMP_CTRL (1 << 13)
+#define POWER_MINPWR_PWD_BO (1 << 12)
+#define POWER_MINPWR_USE_VDDXTAL_VBG (1 << 11)
+#define POWER_MINPWR_PWD_ANA_CMPS (1 << 10)
+#define POWER_MINPWR_ENABLE_OSC (1 << 9)
+#define POWER_MINPWR_SELECT_OSC (1 << 8)
+#define POWER_MINPWR_VBG_OFF (1 << 7)
+#define POWER_MINPWR_DOUBLE_FETS (1 << 6)
+#define POWER_MINPWR_HALFFETS (1 << 5)
+#define POWER_MINPWR_LESSANA_I (1 << 4)
+#define POWER_MINPWR_PWD_XTAL24 (1 << 3)
+#define POWER_MINPWR_DC_STOPCLK (1 << 2)
+#define POWER_MINPWR_EN_DC_PFM (1 << 1)
+#define POWER_MINPWR_DC_HALFCLK (1 << 0)
+
+#define POWER_CHARGE_ADJ_VOLT_MASK (0x7 << 24)
+#define POWER_CHARGE_ADJ_VOLT_OFFSET 24
+#define POWER_CHARGE_ADJ_VOLT_M025P (0x1 << 24)
+#define POWER_CHARGE_ADJ_VOLT_P050P (0x2 << 24)
+#define POWER_CHARGE_ADJ_VOLT_M075P (0x3 << 24)
+#define POWER_CHARGE_ADJ_VOLT_P025P (0x4 << 24)
+#define POWER_CHARGE_ADJ_VOLT_M050P (0x5 << 24)
+#define POWER_CHARGE_ADJ_VOLT_P075P (0x6 << 24)
+#define POWER_CHARGE_ADJ_VOLT_M100P (0x7 << 24)
+#define POWER_CHARGE_ENABLE_LOAD (1 << 22)
+#define MX23_POWER_CHARGE_ENABLE_CHARGER_RESISTORS (1 << 21)
+#define POWER_CHARGE_ENABLE_FAULT_DETECT (1 << 20)
+#define POWER_CHARGE_CHRG_STS_OFF (1 << 19)
+#define MX28_POWER_CHARGE_LIION_4P1 (1 << 18)
+#define MX23_POWER_CHARGE_USE_EXTERN_R (1 << 17)
+#define POWER_CHARGE_PWD_BATTCHRG (1 << 16)
+#define MX28_POWER_CHARGE_ENABLE_CHARGER_USB1 (1 << 13)
+#define MX28_POWER_CHARGE_ENABLE_CHARGER_USB0 (1 << 12)
+#define POWER_CHARGE_STOP_ILIMIT_MASK (0xf << 8)
+#define POWER_CHARGE_STOP_ILIMIT_OFFSET 8
+#define POWER_CHARGE_STOP_ILIMIT_10MA (0x1 << 8)
+#define POWER_CHARGE_STOP_ILIMIT_20MA (0x2 << 8)
+#define POWER_CHARGE_STOP_ILIMIT_50MA (0x4 << 8)
+#define POWER_CHARGE_STOP_ILIMIT_100MA (0x8 << 8)
+#define POWER_CHARGE_BATTCHRG_I_MASK 0x3f
+#define POWER_CHARGE_BATTCHRG_I_OFFSET 0
+#define POWER_CHARGE_BATTCHRG_I_10MA 0x01
+#define POWER_CHARGE_BATTCHRG_I_20MA 0x02
+#define POWER_CHARGE_BATTCHRG_I_50MA 0x04
+#define POWER_CHARGE_BATTCHRG_I_100MA 0x08
+#define POWER_CHARGE_BATTCHRG_I_200MA 0x10
+#define POWER_CHARGE_BATTCHRG_I_400MA 0x20
+
+#define POWER_VDDDCTRL_ADJTN_MASK (0xf << 28)
+#define POWER_VDDDCTRL_ADJTN_OFFSET 28
+#define POWER_VDDDCTRL_PWDN_BRNOUT (1 << 23)
+#define POWER_VDDDCTRL_DISABLE_STEPPING (1 << 22)
+#define POWER_VDDDCTRL_ENABLE_LINREG (1 << 21)
+#define POWER_VDDDCTRL_DISABLE_FET (1 << 20)
+#define POWER_VDDDCTRL_LINREG_OFFSET_MASK (0x3 << 16)
+#define POWER_VDDDCTRL_LINREG_OFFSET_OFFSET 16
+#define POWER_VDDDCTRL_LINREG_OFFSET_0STEPS (0x0 << 16)
+#define POWER_VDDDCTRL_LINREG_OFFSET_1STEPS_ABOVE (0x1 << 16)
+#define POWER_VDDDCTRL_LINREG_OFFSET_1STEPS_BELOW (0x2 << 16)
+#define POWER_VDDDCTRL_LINREG_OFFSET_2STEPS_BELOW (0x3 << 16)
+#define POWER_VDDDCTRL_BO_OFFSET_MASK (0x7 << 8)
+#define POWER_VDDDCTRL_BO_OFFSET_OFFSET 8
+#define POWER_VDDDCTRL_TRG_MASK 0x1f
+#define POWER_VDDDCTRL_TRG_OFFSET 0
+
+#define POWER_VDDACTRL_PWDN_BRNOUT (1 << 19)
+#define POWER_VDDACTRL_DISABLE_STEPPING (1 << 18)
+#define POWER_VDDACTRL_ENABLE_LINREG (1 << 17)
+#define POWER_VDDACTRL_DISABLE_FET (1 << 16)
+#define POWER_VDDACTRL_LINREG_OFFSET_MASK (0x3 << 12)
+#define POWER_VDDACTRL_LINREG_OFFSET_OFFSET 12
+#define POWER_VDDACTRL_LINREG_OFFSET_0STEPS (0x0 << 12)
+#define POWER_VDDACTRL_LINREG_OFFSET_1STEPS_ABOVE (0x1 << 12)
+#define POWER_VDDACTRL_LINREG_OFFSET_1STEPS_BELOW (0x2 << 12)
+#define POWER_VDDACTRL_LINREG_OFFSET_2STEPS_BELOW (0x3 << 12)
+#define POWER_VDDACTRL_BO_OFFSET_MASK (0x7 << 8)
+#define POWER_VDDACTRL_BO_OFFSET_OFFSET 8
+#define POWER_VDDACTRL_TRG_MASK 0x1f
+#define POWER_VDDACTRL_TRG_OFFSET 0
+
+#define POWER_VDDIOCTRL_ADJTN_MASK (0xf << 20)
+#define POWER_VDDIOCTRL_ADJTN_OFFSET 20
+#define POWER_VDDIOCTRL_PWDN_BRNOUT (1 << 18)
+#define POWER_VDDIOCTRL_DISABLE_STEPPING (1 << 17)
+#define POWER_VDDIOCTRL_DISABLE_FET (1 << 16)
+#define POWER_VDDIOCTRL_LINREG_OFFSET_MASK (0x3 << 12)
+#define POWER_VDDIOCTRL_LINREG_OFFSET_OFFSET 12
+#define POWER_VDDIOCTRL_LINREG_OFFSET_0STEPS (0x0 << 12)
+#define POWER_VDDIOCTRL_LINREG_OFFSET_1STEPS_ABOVE (0x1 << 12)
+#define POWER_VDDIOCTRL_LINREG_OFFSET_1STEPS_BELOW (0x2 << 12)
+#define POWER_VDDIOCTRL_LINREG_OFFSET_2STEPS_BELOW (0x3 << 12)
+#define POWER_VDDIOCTRL_BO_OFFSET_MASK (0x7 << 8)
+#define POWER_VDDIOCTRL_BO_OFFSET_OFFSET 8
+#define POWER_VDDIOCTRL_TRG_MASK 0x1f
+#define POWER_VDDIOCTRL_TRG_OFFSET 0
+
+#define POWER_VDDMEMCTRL_PULLDOWN_ACTIVE (1 << 10)
+#define POWER_VDDMEMCTRL_ENABLE_ILIMIT (1 << 9)
+#define POWER_VDDMEMCTRL_ENABLE_LINREG (1 << 8)
+#define MX28_POWER_VDDMEMCTRL_BO_OFFSET_MASK (0x7 << 5)
+#define MX28_POWER_VDDMEMCTRL_BO_OFFSET_OFFSET 5
+#define POWER_VDDMEMCTRL_TRG_MASK 0x1f
+#define POWER_VDDMEMCTRL_TRG_OFFSET 0
+
+#define POWER_DCDC4P2_DROPOUT_CTRL_MASK (0xf << 28)
+#define POWER_DCDC4P2_DROPOUT_CTRL_OFFSET 28
+#define POWER_DCDC4P2_DROPOUT_CTRL_200MV (0x3 << 30)
+#define POWER_DCDC4P2_DROPOUT_CTRL_100MV (0x2 << 30)
+#define POWER_DCDC4P2_DROPOUT_CTRL_50MV (0x1 << 30)
+#define POWER_DCDC4P2_DROPOUT_CTRL_25MV (0x0 << 30)
+#define POWER_DCDC4P2_DROPOUT_CTRL_SRC_4P2 (0x0 << 28)
+#define POWER_DCDC4P2_DROPOUT_CTRL_SRC_4P2_LT_BATT (0x1 << 28)
+#define POWER_DCDC4P2_DROPOUT_CTRL_SRC_SEL (0x2 << 28)
+#define POWER_DCDC4P2_ISTEAL_THRESH_MASK (0x3 << 24)
+#define POWER_DCDC4P2_ISTEAL_THRESH_OFFSET 24
+#define POWER_DCDC4P2_ENABLE_4P2 (1 << 23)
+#define POWER_DCDC4P2_ENABLE_DCDC (1 << 22)
+#define POWER_DCDC4P2_HYST_DIR (1 << 21)
+#define POWER_DCDC4P2_HYST_THRESH (1 << 20)
+#define POWER_DCDC4P2_TRG_MASK (0x7 << 16)
+#define POWER_DCDC4P2_TRG_OFFSET 16
+#define POWER_DCDC4P2_TRG_4V2 (0x0 << 16)
+#define POWER_DCDC4P2_TRG_4V1 (0x1 << 16)
+#define POWER_DCDC4P2_TRG_4V0 (0x2 << 16)
+#define POWER_DCDC4P2_TRG_3V9 (0x3 << 16)
+#define POWER_DCDC4P2_TRG_BATT (0x4 << 16)
+#define POWER_DCDC4P2_BO_MASK (0x1f << 8)
+#define POWER_DCDC4P2_BO_OFFSET 8
+#define POWER_DCDC4P2_CMPTRIP_MASK 0x1f
+#define POWER_DCDC4P2_CMPTRIP_OFFSET 0
+
+#define POWER_MISC_FREQSEL_MASK (0x7 << 4)
+#define POWER_MISC_FREQSEL_OFFSET 4
+#define POWER_MISC_FREQSEL_20MHZ (0x1 << 4)
+#define POWER_MISC_FREQSEL_24MHZ (0x2 << 4)
+#define POWER_MISC_FREQSEL_19MHZ (0x3 << 4)
+#define POWER_MISC_FREQSEL_14MHZ (0x4 << 4)
+#define POWER_MISC_FREQSEL_18MHZ (0x5 << 4)
+#define POWER_MISC_FREQSEL_21MHZ (0x6 << 4)
+#define POWER_MISC_FREQSEL_17MHZ (0x7 << 4)
+#define POWER_MISC_DISABLE_FET_BO_LOGIC (1 << 3)
+#define POWER_MISC_DELAY_TIMING (1 << 2)
+#define POWER_MISC_TEST (1 << 1)
+#define POWER_MISC_SEL_PLLCLK (1 << 0)
+
+#define POWER_DCLIMITS_POSLIMIT_BUCK_MASK (0x7f << 8)
+#define POWER_DCLIMITS_POSLIMIT_BUCK_OFFSET 8
+#define POWER_DCLIMITS_NEGLIMIT_MASK 0x7f
+#define POWER_DCLIMITS_NEGLIMIT_OFFSET 0
+
+#define POWER_LOOPCTRL_TOGGLE_DIF (1 << 20)
+#define POWER_LOOPCTRL_HYST_SIGN (1 << 19)
+#define POWER_LOOPCTRL_EN_CM_HYST (1 << 18)
+#define POWER_LOOPCTRL_EN_DF_HYST (1 << 17)
+#define POWER_LOOPCTRL_CM_HYST_THRESH (1 << 16)
+#define POWER_LOOPCTRL_DF_HYST_THRESH (1 << 15)
+#define POWER_LOOPCTRL_RCSCALE_THRESH (1 << 14)
+#define POWER_LOOPCTRL_EN_RCSCALE_MASK (0x3 << 12)
+#define POWER_LOOPCTRL_EN_RCSCALE_OFFSET 12
+#define POWER_LOOPCTRL_EN_RCSCALE_DIS (0x0 << 12)
+#define POWER_LOOPCTRL_EN_RCSCALE_2X (0x1 << 12)
+#define POWER_LOOPCTRL_EN_RCSCALE_4X (0x2 << 12)
+#define POWER_LOOPCTRL_EN_RCSCALE_8X (0x3 << 12)
+#define POWER_LOOPCTRL_DC_FF_MASK (0x7 << 8)
+#define POWER_LOOPCTRL_DC_FF_OFFSET 8
+#define POWER_LOOPCTRL_DC_R_MASK (0xf << 4)
+#define POWER_LOOPCTRL_DC_R_OFFSET 4
+#define POWER_LOOPCTRL_DC_C_MASK 0x3
+#define POWER_LOOPCTRL_DC_C_OFFSET 0
+#define POWER_LOOPCTRL_DC_C_MAX 0x0
+#define POWER_LOOPCTRL_DC_C_2X 0x1
+#define POWER_LOOPCTRL_DC_C_4X 0x2
+#define POWER_LOOPCTRL_DC_C_MIN 0x3
+
+#define POWER_STS_PWRUP_SOURCE_MASK (0x3f << 24)
+#define POWER_STS_PWRUP_SOURCE_OFFSET 24
+#define POWER_STS_PWRUP_SOURCE_5V (0x20 << 24)
+#define POWER_STS_PWRUP_SOURCE_RTC (0x10 << 24)
+#define POWER_STS_PWRUP_SOURCE_PSWITCH_HIGH (0x02 << 24)
+#define POWER_STS_PWRUP_SOURCE_PSWITCH_MID (0x01 << 24)
+#define POWER_STS_PSWITCH_MASK (0x3 << 20)
+#define POWER_STS_PSWITCH_OFFSET 20
+#define MX28_POWER_STS_THERMAL_WARNING (1 << 19)
+#define MX28_POWER_STS_VDDMEM_BO (1 << 18)
+#define POWER_STS_AVALID0_STATUS (1 << 17)
+#define POWER_STS_BVALID0_STATUS (1 << 16)
+#define POWER_STS_VBUSVALID0_STATUS (1 << 15)
+#define POWER_STS_SESSEND0_STATUS (1 << 14)
+#define POWER_STS_BATT_BO (1 << 13)
+#define POWER_STS_VDD5V_FAULT (1 << 12)
+#define POWER_STS_CHRGSTS (1 << 11)
+#define POWER_STS_DCDC_4P2_BO (1 << 10)
+#define POWER_STS_DC_OK (1 << 9)
+#define POWER_STS_VDDIO_BO (1 << 8)
+#define POWER_STS_VDDA_BO (1 << 7)
+#define POWER_STS_VDDD_BO (1 << 6)
+#define POWER_STS_VDD5V_GT_VDDIO (1 << 5)
+#define POWER_STS_VDD5V_DROOP (1 << 4)
+#define POWER_STS_AVALID0 (1 << 3)
+#define POWER_STS_BVALID0 (1 << 2)
+#define POWER_STS_VBUSVALID0 (1 << 1)
+#define POWER_STS_SESSEND0 (1 << 0)
+
+#define MX23_POWER_SPEED_STATUS_MASK (0xff << 16)
+#define MX23_POWER_SPEED_STATUS_OFFSET 16
+#define MX28_POWER_SPEED_STATUS_MASK (0xffff << 8)
+#define MX28_POWER_SPEED_STATUS_OFFSET 8
+#define MX28_POWER_SPEED_STATUS_SEL_MASK (0x3 << 6)
+#define MX28_POWER_SPEED_STATUS_SEL_OFFSET 6
+#define MX28_POWER_SPEED_STATUS_SEL_DCDC_STAT (0x0 << 6)
+#define MX28_POWER_SPEED_STATUS_SEL_CORE_STAT (0x1 << 6)
+#define MX28_POWER_SPEED_STATUS_SEL_ARM_STAT (0x2 << 6)
+#define POWER_SPEED_CTRL_MASK 0x3
+#define POWER_SPEED_CTRL_OFFSET 0
+#define POWER_SPEED_CTRL_SS_OFF 0x0
+#define POWER_SPEED_CTRL_SS_ON 0x1
+#define POWER_SPEED_CTRL_SS_ENABLE 0x3
+
+#define POWER_BATTMONITOR_BATT_VAL_MASK (0x3ff << 16)
+#define POWER_BATTMONITOR_BATT_VAL_OFFSET 16
+#define MX28_POWER_BATTMONITOR_PWDN_BATTBRNOUT_5VDETECT_EN (1 << 11)
+#define POWER_BATTMONITOR_EN_BATADJ (1 << 10)
+#define POWER_BATTMONITOR_PWDN_BATTBRNOUT (1 << 9)
+#define POWER_BATTMONITOR_BRWNOUT_PWD (1 << 8)
+#define POWER_BATTMONITOR_BRWNOUT_LVL_MASK 0x1f
+#define POWER_BATTMONITOR_BRWNOUT_LVL_OFFSET 0
+
+#define POWER_RESET_UNLOCK_MASK (0xffff << 16)
+#define POWER_RESET_UNLOCK_OFFSET 16
+#define POWER_RESET_UNLOCK_KEY (0x3e77 << 16)
+#define MX28_POWER_RESET_FASTFALL_PSWITCH_OFF (1 << 2)
+#define POWER_RESET_PWD_OFF (1 << 1)
+#define POWER_RESET_PWD (1 << 0)
+
+#define POWER_DEBUG_VBUSVALIDPIOLOCK (1 << 3)
+#define POWER_DEBUG_AVALIDPIOLOCK (1 << 2)
+#define POWER_DEBUG_BVALIDPIOLOCK (1 << 1)
+#define POWER_DEBUG_SESSENDPIOLOCK (1 << 0)
+
+#define MX28_POWER_THERMAL_TEST (1 << 8)
+#define MX28_POWER_THERMAL_PWD (1 << 7)
+#define MX28_POWER_THERMAL_LOW_POWER (1 << 6)
+#define MX28_POWER_THERMAL_OFFSET_ADJ_MASK (0x3 << 4)
+#define MX28_POWER_THERMAL_OFFSET_ADJ_OFFSET 4
+#define MX28_POWER_THERMAL_OFFSET_ADJ_ENABLE (1 << 3)
+#define MX28_POWER_THERMAL_TEMP_THRESHOLD_MASK 0x7
+#define MX28_POWER_THERMAL_TEMP_THRESHOLD_OFFSET 0
+
+#define MX28_POWER_USB1CTRL_AVALID1 (1 << 3)
+#define MX28_POWER_USB1CTRL_BVALID1 (1 << 2)
+#define MX28_POWER_USB1CTRL_VBUSVALID1 (1 << 1)
+#define MX28_POWER_USB1CTRL_SESSEND1 (1 << 0)
+
+#define POWER_SPECIAL_TEST_MASK 0xffffffff
+#define POWER_SPECIAL_TEST_OFFSET 0
+
+#define POWER_VERSION_MAJOR_MASK (0xff << 24)
+#define POWER_VERSION_MAJOR_OFFSET 24
+#define POWER_VERSION_MINOR_MASK (0xff << 16)
+#define POWER_VERSION_MINOR_OFFSET 16
+#define POWER_VERSION_STEP_MASK 0xffff
+#define POWER_VERSION_STEP_OFFSET 0
+
+#define MX28_POWER_ANACLKCTRL_CLKGATE_0 (1 << 31)
+#define MX28_POWER_ANACLKCTRL_OUTDIV_MASK (0x7 << 28)
+#define MX28_POWER_ANACLKCTRL_OUTDIV_OFFSET 28
+#define MX28_POWER_ANACLKCTRL_INVERT_OUTCLK (1 << 27)
+#define MX28_POWER_ANACLKCTRL_CLKGATE_I (1 << 26)
+#define MX28_POWER_ANACLKCTRL_DITHER_OFF (1 << 10)
+#define MX28_POWER_ANACLKCTRL_SLOW_DITHER (1 << 9)
+#define MX28_POWER_ANACLKCTRL_INVERT_INCLK (1 << 8)
+#define MX28_POWER_ANACLKCTRL_INCLK_SHIFT_MASK (0x3 << 4)
+#define MX28_POWER_ANACLKCTRL_INCLK_SHIFT_OFFSET 4
+#define MX28_POWER_ANACLKCTRL_INDIV_MASK 0x7
+#define MX28_POWER_ANACLKCTRL_INDIV_OFFSET 0
+
+#define MX28_POWER_REFCTRL_FASTSETTLING (1 << 26)
+#define MX28_POWER_REFCTRL_RAISE_REF (1 << 25)
+#define MX28_POWER_REFCTRL_XTAL_BGR_BIAS (1 << 24)
+#define MX28_POWER_REFCTRL_VBG_ADJ_MASK (0x7 << 20)
+#define MX28_POWER_REFCTRL_VBG_ADJ_OFFSET 20
+#define MX28_POWER_REFCTRL_LOW_PWR (1 << 19)
+#define MX28_POWER_REFCTRL_BIAS_CTRL_MASK (0x3 << 16)
+#define MX28_POWER_REFCTRL_BIAS_CTRL_OFFSET 16
+#define MX28_POWER_REFCTRL_VDDXTAL_TO_VDDD (1 << 14)
+#define MX28_POWER_REFCTRL_ADJ_ANA (1 << 13)
+#define MX28_POWER_REFCTRL_ADJ_VAG (1 << 12)
+#define MX28_POWER_REFCTRL_ANA_REFVAL_MASK (0xf << 8)
+#define MX28_POWER_REFCTRL_ANA_REFVAL_OFFSET 8
+#define MX28_POWER_REFCTRL_VAG_VAL_MASK (0xf << 4)
+#define MX28_POWER_REFCTRL_VAG_VAL_OFFSET 4
+
+#endif /* __MX28_REGS_POWER_H__ */
diff --git a/arch/arm/mach-mxs/include/mach/regs-rtc.h b/arch/arm/mach-mxs/include/mach/regs-rtc.h
new file mode 100644
index 0000000..bd8fdad
--- /dev/null
+++ b/arch/arm/mach-mxs/include/mach/regs-rtc.h
@@ -0,0 +1,134 @@
+/*
+ * Freescale i.MX28 RTC Register Definitions
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@xxxxxxxxx>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __MX28_REGS_RTC_H__
+#define __MX28_REGS_RTC_H__
+
+#include <mach/regs-common.h>
+
+#ifndef __ASSEMBLY__
+struct mxs_rtc_regs {
+ mxs_reg_32(hw_rtc_ctrl)
+ mxs_reg_32(hw_rtc_stat)
+ mxs_reg_32(hw_rtc_milliseconds)
+ mxs_reg_32(hw_rtc_seconds)
+ mxs_reg_32(hw_rtc_rtc_alarm)
+ mxs_reg_32(hw_rtc_watchdog)
+ mxs_reg_32(hw_rtc_persistent0)
+ mxs_reg_32(hw_rtc_persistent1)
+ mxs_reg_32(hw_rtc_persistent2)
+ mxs_reg_32(hw_rtc_persistent3)
+ mxs_reg_32(hw_rtc_persistent4)
+ mxs_reg_32(hw_rtc_persistent5)
+ mxs_reg_32(hw_rtc_debug)
+ mxs_reg_32(hw_rtc_version)
+};
+#endif
+
+#define RTC_CTRL_SFTRST (1 << 31)
+#define RTC_CTRL_CLKGATE (1 << 30)
+#define RTC_CTRL_SUPPRESS_COPY2ANALOG (1 << 6)
+#define RTC_CTRL_FORCE_UPDATE (1 << 5)
+#define RTC_CTRL_WATCHDOGEN (1 << 4)
+#define RTC_CTRL_ONEMSEC_IRQ (1 << 3)
+#define RTC_CTRL_ALARM_IRQ (1 << 2)
+#define RTC_CTRL_ONEMSEC_IRQ_EN (1 << 1)
+#define RTC_CTRL_ALARM_IRQ_EN (1 << 0)
+
+#define RTC_STAT_RTC_PRESENT (1 << 31)
+#define RTC_STAT_ALARM_PRESENT (1 << 30)
+#define RTC_STAT_WATCHDOG_PRESENT (1 << 29)
+#define RTC_STAT_XTAL32000_PRESENT (1 << 28)
+#define RTC_STAT_XTAL32768_PRESENT (1 << 27)
+#define RTC_STAT_STALE_REGS_MASK (0xff << 16)
+#define RTC_STAT_STALE_REGS_OFFSET 16
+#define RTC_STAT_NEW_REGS_MASK (0xff << 8)
+#define RTC_STAT_NEW_REGS_OFFSET 8
+
+#define RTC_MILLISECONDS_COUNT_MASK 0xffffffff
+#define RTC_MILLISECONDS_COUNT_OFFSET 0
+
+#define RTC_SECONDS_COUNT_MASK 0xffffffff
+#define RTC_SECONDS_COUNT_OFFSET 0
+
+#define RTC_ALARM_VALUE_MASK 0xffffffff
+#define RTC_ALARM_VALUE_OFFSET 0
+
+#define RTC_WATCHDOG_COUNT_MASK 0xffffffff
+#define RTC_WATCHDOG_COUNT_OFFSET 0
+
+#define RTC_PERSISTENT0_ADJ_POSLIMITBUCK_MASK (0xf << 28)
+#define RTC_PERSISTENT0_ADJ_POSLIMITBUCK_OFFSET 28
+#define RTC_PERSISTENT0_ADJ_POSLIMITBUCK_2V83 (0x0 << 28)
+#define RTC_PERSISTENT0_ADJ_POSLIMITBUCK_2V78 (0x1 << 28)
+#define RTC_PERSISTENT0_ADJ_POSLIMITBUCK_2V73 (0x2 << 28)
+#define RTC_PERSISTENT0_ADJ_POSLIMITBUCK_2V68 (0x3 << 28)
+#define RTC_PERSISTENT0_ADJ_POSLIMITBUCK_2V62 (0x4 << 28)
+#define RTC_PERSISTENT0_ADJ_POSLIMITBUCK_2V57 (0x5 << 28)
+#define RTC_PERSISTENT0_ADJ_POSLIMITBUCK_2V52 (0x6 << 28)
+#define RTC_PERSISTENT0_ADJ_POSLIMITBUCK_2V48 (0x7 << 28)
+#define RTC_PERSISTENT0_EXTERNAL_RESET (1 << 21)
+#define RTC_PERSISTENT0_THERMAL_RESET (1 << 20)
+#define RTC_PERSISTENT0_ENABLE_LRADC_PWRUP (1 << 18)
+#define RTC_PERSISTENT0_AUTO_RESTART (1 << 17)
+#define RTC_PERSISTENT0_DISABLE_PSWITCH (1 << 16)
+#define RTC_PERSISTENT0_LOWERBIAS_MASK (0xf << 14)
+#define RTC_PERSISTENT0_LOWERBIAS_OFFSET 14
+#define RTC_PERSISTENT0_LOWERBIAS_NOMINAL (0x0 << 14)
+#define RTC_PERSISTENT0_LOWERBIAS_M25P (0x1 << 14)
+#define RTC_PERSISTENT0_LOWERBIAS_M50P (0x3 << 14)
+#define RTC_PERSISTENT0_DISABLE_XTALOK (1 << 13)
+#define RTC_PERSISTENT0_MSEC_RES_MASK (0x1f << 8)
+#define RTC_PERSISTENT0_MSEC_RES_OFFSET 8
+#define RTC_PERSISTENT0_MSEC_RES_1MS (0x01 << 8)
+#define RTC_PERSISTENT0_MSEC_RES_2MS (0x02 << 8)
+#define RTC_PERSISTENT0_MSEC_RES_4MS (0x04 << 8)
+#define RTC_PERSISTENT0_MSEC_RES_8MS (0x08 << 8)
+#define RTC_PERSISTENT0_MSEC_RES_16MS (0x10 << 8)
+#define RTC_PERSISTENT0_ALARM_WAKE (1 << 7)
+#define RTC_PERSISTENT0_XTAL32_FREQ (1 << 6)
+#define RTC_PERSISTENT0_XTAL32KHZ_PWRUP (1 << 5)
+#define RTC_PERSISTENT0_XTAL24KHZ_PWRUP (1 << 4)
+#define RTC_PERSISTENT0_LCK_SECS (1 << 3)
+#define RTC_PERSISTENT0_ALARM_EN (1 << 2)
+#define RTC_PERSISTENT0_ALARM_WAKE_EN (1 << 1)
+#define RTC_PERSISTENT0_CLOCKSOURCE (1 << 0)
+
+#define RTC_PERSISTENT1_GENERAL_MASK 0xffffffff
+#define RTC_PERSISTENT1_GENERAL_OFFSET 0
+#define RTC_PERSISTENT1_GENERAL_OTG_ALT_ROLE 0x0080
+#define RTC_PERSISTENT1_GENERAL_OTG_HNP 0x0100
+#define RTC_PERSISTENT1_GENERAL_USB_LPM 0x0200
+#define RTC_PERSISTENT1_GENERAL_SKIP_CHECKDISK 0x0400
+#define RTC_PERSISTENT1_GENERAL_USB_BOOT_PLAYER 0x0800
+#define RTC_PERSISTENT1_GENERAL_ENUM_500MA_2X 0x1000
+
+#define RTC_PERSISTENT2_GENERAL_MASK 0xffffffff
+#define RTC_PERSISTENT2_GENERAL_OFFSET 0
+
+#define RTC_PERSISTENT3_GENERAL_MASK 0xffffffff
+#define RTC_PERSISTENT3_GENERAL_OFFSET 0
+
+#define RTC_PERSISTENT4_GENERAL_MASK 0xffffffff
+#define RTC_PERSISTENT4_GENERAL_OFFSET 0
+
+#define RTC_PERSISTENT5_GENERAL_MASK 0xffffffff
+#define RTC_PERSISTENT5_GENERAL_OFFSET 0
+
+#define RTC_DEBUG_WATCHDOG_RESET_MASK (1 << 1)
+#define RTC_DEBUG_WATCHDOG_RESET (1 << 0)
+
+#define RTC_VERSION_MAJOR_MASK (0xff << 24)
+#define RTC_VERSION_MAJOR_OFFSET 24
+#define RTC_VERSION_MINOR_MASK (0xff << 16)
+#define RTC_VERSION_MINOR_OFFSET 16
+#define RTC_VERSION_STEP_MASK 0xffff
+#define RTC_VERSION_STEP_OFFSET 0
+
+#endif /* __MX28_REGS_RTC_H__ */
diff --git a/arch/arm/mach-mxs/lradc-init.c b/arch/arm/mach-mxs/lradc-init.c
new file mode 100644
index 0000000..682a475
--- /dev/null
+++ b/arch/arm/mach-mxs/lradc-init.c
@@ -0,0 +1,70 @@
+/*
+ * Freescale i.MX28 Battery measurement init
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@xxxxxxxxx>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <config.h>
+#include <asm/io.h>
+#include <mach/imx-regs.h>
+#include <mach/regs-lradc.h>
+#include <mach/init.h>
+
+void mxs_lradc_init(void)
+{
+ struct mxs_lradc_regs *regs = (struct mxs_lradc_regs *)IMX_LRADC_BASE;
+
+ writel(LRADC_CTRL0_SFTRST, ®s->hw_lradc_ctrl0_clr);
+ writel(LRADC_CTRL0_CLKGATE, ®s->hw_lradc_ctrl0_clr);
+ writel(LRADC_CTRL0_ONCHIP_GROUNDREF, ®s->hw_lradc_ctrl0_clr);
+
+ clrsetbits_le32(®s->hw_lradc_ctrl3,
+ LRADC_CTRL3_CYCLE_TIME_MASK,
+ LRADC_CTRL3_CYCLE_TIME_6MHZ);
+
+ clrsetbits_le32(®s->hw_lradc_ctrl4,
+ LRADC_CTRL4_LRADC7SELECT_MASK |
+ LRADC_CTRL4_LRADC6SELECT_MASK,
+ LRADC_CTRL4_LRADC7SELECT_CHANNEL7 |
+ LRADC_CTRL4_LRADC6SELECT_CHANNEL10);
+}
+
+void mxs_lradc_enable_batt_measurement(void)
+{
+ struct mxs_lradc_regs *regs = (struct mxs_lradc_regs *)IMX_LRADC_BASE;
+
+ /* Check if the channel is present at all. */
+ if (!(readl(®s->hw_lradc_status) & LRADC_STATUS_CHANNEL7_PRESENT))
+ return;
+
+ writel(LRADC_CTRL1_LRADC7_IRQ_EN, ®s->hw_lradc_ctrl1_clr);
+ writel(LRADC_CTRL1_LRADC7_IRQ, ®s->hw_lradc_ctrl1_clr);
+
+ clrsetbits_le32(®s->hw_lradc_conversion,
+ LRADC_CONVERSION_SCALE_FACTOR_MASK,
+ LRADC_CONVERSION_SCALE_FACTOR_LI_ION);
+ writel(LRADC_CONVERSION_AUTOMATIC, ®s->hw_lradc_conversion_set);
+
+ /* Configure the channel. */
+ writel((1 << 7) << LRADC_CTRL2_DIVIDE_BY_TWO_OFFSET,
+ ®s->hw_lradc_ctrl2_clr);
+ writel(0xffffffff, ®s->hw_lradc_ch7_clr);
+ clrbits_le32(®s->hw_lradc_ch7, LRADC_CH_NUM_SAMPLES_MASK);
+ writel(LRADC_CH_ACCUMULATE, ®s->hw_lradc_ch7_clr);
+
+ /* Schedule the channel. */
+ writel(1 << 7, ®s->hw_lradc_ctrl0_set);
+
+ /* Start the channel sampling. */
+ writel(((1 << 7) << LRADC_DELAY_TRIGGER_LRADCS_OFFSET) |
+ ((1 << 3) << LRADC_DELAY_TRIGGER_DELAYS_OFFSET) |
+ 100, ®s->hw_lradc_delay3);
+
+ writel(0xffffffff, ®s->hw_lradc_ch7_clr);
+
+ writel(LRADC_DELAY_KICK, ®s->hw_lradc_delay3_set);
+}
diff --git a/arch/arm/mach-mxs/mem-init.c b/arch/arm/mach-mxs/mem-init.c
new file mode 100644
index 0000000..f4328b7
--- /dev/null
+++ b/arch/arm/mach-mxs/mem-init.c
@@ -0,0 +1,292 @@
+/*
+ * Freescale i.MX28 RAM init
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@xxxxxxxxx>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <config.h>
+#include <io.h>
+#include <mach/imx-regs.h>
+#include <linux/compiler.h>
+#include <stmp-device.h>
+
+#include <mach/init.h>
+#include <mach/regs-power-mx28.h>
+#include <mach/regs-clkctrl-mx28.h>
+
+static uint32_t mx28_dram_vals[] = {
+/*
+ * i.MX28 DDR2 at 200MHz
+ */
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000100, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00010101, 0x01010101,
+ 0x000f0f01, 0x0f02020a, 0x00000000, 0x00010101,
+ 0x00000100, 0x00000100, 0x00000000, 0x00000002,
+ 0x01010000, 0x07080403, 0x06005003, 0x0a0000c8,
+ 0x02009c40, 0x0002030c, 0x0036a609, 0x031a0612,
+ 0x02030202, 0x00c8001c, 0x00000000, 0x00000000,
+ 0x00012100, 0xffff0303, 0x00012100, 0xffff0303,
+ 0x00012100, 0xffff0303, 0x00012100, 0xffff0303,
+ 0x00000003, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000612, 0x01000F02,
+ 0x06120612, 0x00000200, 0x00020007, 0xf4004a27,
+ 0xf4004a27, 0xf4004a27, 0xf4004a27, 0x07000300,
+ 0x07000300, 0x07400300, 0x07400300, 0x00000005,
+ 0x00000000, 0x00000000, 0x01000000, 0x01020408,
+ 0x08040201, 0x000f1133, 0x00000000, 0x00001f04,
+ 0x00001f04, 0x00001f04, 0x00001f04, 0x00001f04,
+ 0x00001f04, 0x00001f04, 0x00001f04, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00010000, 0x00030404,
+ 0x00000003, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x01010000,
+ 0x01000000, 0x03030000, 0x00010303, 0x01020202,
+ 0x00000000, 0x02040303, 0x21002103, 0x00061200,
+ 0x06120612, 0x04420442, 0x04420442, 0x00040004,
+ 0x00040004, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0xffffffff
+};
+
+/*
+ * i.MX23 DDR at 133MHz
+ */
+static uint32_t mx23_dram_vals[] = {
+ 0x01010001, 0x00010100, 0x01000101, 0x00000001,
+ 0x00000101, 0x00000000, 0x00010000, 0x01000001,
+ 0x00000000, 0x00000001, 0x07000200, 0x00070202,
+ 0x02020000, 0x04040a01, 0x00000201, 0x02040000,
+ 0x02000000, 0x19000f08, 0x0d0d0000, 0x02021313,
+ 0x02061521, 0x0000000a, 0x00080008, 0x00200020,
+ 0x00200020, 0x00200020, 0x000003f7, 0x00000000,
+ 0x00000000, 0x00000020, 0x00000020, 0x00c80000,
+ 0x000a23cd, 0x000000c8, 0x00006665, 0x00000000,
+ 0x00000101, 0x00040001, 0x00000000, 0x00000000,
+ 0x00010000
+};
+
+static void mx28_initialize_dram_values(void)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(mx28_dram_vals); i++)
+ writel(mx28_dram_vals[i], IMX_SDRAMC_BASE + (4 * i));
+}
+
+static void mx23_initialize_dram_values(void)
+{
+ int i;
+
+ /*
+ * HW_DRAM_CTL27, HW_DRAM_CTL28 and HW_DRAM_CTL35 are not initialized as
+ * per FSL bootlets code.
+ *
+ * mx23 Reference Manual marks HW_DRAM_CTL27 and HW_DRAM_CTL28 as
+ * "reserved".
+ * HW_DRAM_CTL8 is setup as the last element.
+ * So skip the initialization of these HW_DRAM_CTL registers.
+ */
+ for (i = 0; i < ARRAY_SIZE(mx23_dram_vals); i++) {
+ if (i == 8 || i == 27 || i == 28 || i == 35)
+ continue;
+ writel(mx23_dram_vals[i], IMX_SDRAMC_BASE + (4 * i));
+ }
+
+ /*
+ * Enable tRAS lockout in HW_DRAM_CTL08 ; it must be the last
+ * element to be set
+ */
+ writel((1 << 24), IMX_SDRAMC_BASE + (4 * 8));
+}
+
+void mxs_mem_init_clock(unsigned char divider)
+{
+ struct mxs_clkctrl_regs *clkctrl_regs =
+ (struct mxs_clkctrl_regs *)IMX_CCM_BASE;
+
+ /* Gate EMI clock */
+ writeb(CLKCTRL_FRAC_CLKGATE,
+ &clkctrl_regs->hw_clkctrl_frac0_set[CLKCTRL_FRAC0_EMI]);
+
+ /* Set fractional divider for ref_emi */
+ writeb(CLKCTRL_FRAC_CLKGATE | (divider & CLKCTRL_FRAC_FRAC_MASK),
+ &clkctrl_regs->hw_clkctrl_frac0[CLKCTRL_FRAC0_EMI]);
+
+ /* Ungate EMI clock */
+ writeb(CLKCTRL_FRAC_CLKGATE,
+ &clkctrl_regs->hw_clkctrl_frac0_clr[CLKCTRL_FRAC0_EMI]);
+
+ mxs_early_delay(11000);
+
+ /* Set EMI clock divider for EMI clock to 411 / 2 = 205MHz */
+ writel((2 << CLKCTRL_EMI_DIV_EMI_OFFSET) |
+ (1 << CLKCTRL_EMI_DIV_XTAL_OFFSET),
+ &clkctrl_regs->hw_clkctrl_emi);
+
+ /* Unbypass EMI */
+ writel(CLKCTRL_CLKSEQ_BYPASS_EMI,
+ &clkctrl_regs->hw_clkctrl_clkseq_clr);
+
+ mxs_early_delay(10000);
+}
+
+void mxs_mem_setup_cpu_and_hbus(void)
+{
+ struct mxs_clkctrl_regs *clkctrl_regs =
+ (struct mxs_clkctrl_regs *)IMX_CCM_BASE;
+
+ /* Set fractional divider for ref_cpu to 480 * 18 / 19 = 454MHz
+ * and ungate CPU clock */
+ writeb(19 & CLKCTRL_FRAC_FRAC_MASK,
+ (uint8_t *)&clkctrl_regs->hw_clkctrl_frac0[CLKCTRL_FRAC0_CPU]);
+
+ /* Set CPU bypass */
+ writel(CLKCTRL_CLKSEQ_BYPASS_CPU,
+ &clkctrl_regs->hw_clkctrl_clkseq_set);
+
+ /* HBUS = 151MHz */
+ writel(CLKCTRL_HBUS_DIV_MASK, &clkctrl_regs->hw_clkctrl_hbus_set);
+ writel(((~3) << CLKCTRL_HBUS_DIV_OFFSET) & CLKCTRL_HBUS_DIV_MASK,
+ &clkctrl_regs->hw_clkctrl_hbus_clr);
+
+ mxs_early_delay(10000);
+
+ /* CPU clock divider = 1 */
+ clrsetbits_le32(&clkctrl_regs->hw_clkctrl_cpu,
+ CLKCTRL_CPU_DIV_CPU_MASK, 1);
+
+ /* Disable CPU bypass */
+ writel(CLKCTRL_CLKSEQ_BYPASS_CPU,
+ &clkctrl_regs->hw_clkctrl_clkseq_clr);
+
+ mxs_early_delay(15000);
+}
+
+void mxs_mem_setup_vdda(void)
+{
+ struct mxs_power_regs *power_regs =
+ (struct mxs_power_regs *)IMX_POWER_BASE;
+
+ writel((0xc << POWER_VDDACTRL_TRG_OFFSET) |
+ (0x7 << POWER_VDDACTRL_BO_OFFSET_OFFSET) |
+ POWER_VDDACTRL_LINREG_OFFSET_1STEPS_BELOW,
+ &power_regs->hw_power_vddactrl);
+}
+
+static void mx23_mem_setup_vddmem(void)
+{
+ struct mxs_power_regs *power_regs =
+ (struct mxs_power_regs *)IMX_POWER_BASE;
+
+ clrbits_le32(&power_regs->hw_power_vddmemctrl,
+ POWER_VDDMEMCTRL_ENABLE_ILIMIT);
+
+}
+
+void mx23_mem_init(void)
+{
+ mxs_early_delay(11000);
+
+ /* Fractional divider for ref_emi is 33 ; 480 * 18 / 33 = 266MHz */
+ mxs_mem_init_clock(33);
+
+ mxs_mem_setup_vdda();
+
+ /*
+ * Reset/ungate the EMI block. This is essential, otherwise the system
+ * suffers from memory instability. This thing is mx23 specific and is
+ * no longer present on mx28.
+ */
+ stmp_reset_block((struct mxs_register_32 *)IMX_EMI_BASE, 0);
+
+ mx23_mem_setup_vddmem();
+
+ /*
+ * Configure the DRAM registers
+ */
+
+ /* Clear START and SREFRESH bit from DRAM_CTL8 */
+ clrbits_le32(IMX_SDRAMC_BASE + 0x20, (1 << 16) | (1 << 8));
+
+ mx23_initialize_dram_values();
+
+ /* Set START bit in DRAM_CTL8 */
+ setbits_le32(IMX_SDRAMC_BASE + 0x20, 1 << 16);
+
+ clrbits_le32(IMX_SDRAMC_BASE + 0x40, 1 << 17);
+ mxs_early_delay(20000);
+
+ /* Adjust EMI port priority. */
+ clrsetbits_le32(0x80020000, 0x1f << 16, 0x2);
+ mxs_early_delay(20000);
+
+ setbits_le32(IMX_SDRAMC_BASE + 0x40, 1 << 19);
+ setbits_le32(IMX_SDRAMC_BASE + 0x40, 1 << 11);
+
+ mxs_early_delay(10000);
+
+ mxs_mem_setup_cpu_and_hbus();
+}
+
+#define PINCTRL_EMI_DS_CTRL_DDR_MODE_DDR2 (0x3 << 16)
+
+void mx28_mem_init(void)
+{
+ mxs_early_delay(11000);
+
+ /* Fractional divider for ref_emi is 21 ; 480 * 18 / 21 = 411MHz */
+ mxs_mem_init_clock(21);
+
+ mxs_mem_setup_vdda();
+
+ /* Set DDR2 mode */
+ writel(PINCTRL_EMI_DS_CTRL_DDR_MODE_DDR2,
+ IMX_IOMUXC_BASE + 0x1b80);
+
+ /*
+ * Configure the DRAM registers
+ */
+
+ /* Clear START bit from DRAM_CTL16 */
+ clrbits_le32(IMX_SDRAMC_BASE + 0x40, 1);
+
+ mx28_initialize_dram_values();
+
+ /* Clear SREFRESH bit from DRAM_CTL17 */
+ clrbits_le32(IMX_SDRAMC_BASE + 0x44, 1);
+
+ /* Set START bit in DRAM_CTL16 */
+ setbits_le32(IMX_SDRAMC_BASE + 0x40, 1);
+
+ /* Wait for bit 20 (DRAM init complete) in DRAM_CTL58 */
+ while (!(readl(IMX_SDRAMC_BASE + 0xe8) & (1 << 20)))
+ ;
+
+ mxs_early_delay(10000);
+
+ mxs_mem_setup_cpu_and_hbus();
+}
diff --git a/arch/arm/mach-mxs/power-init.c b/arch/arm/mach-mxs/power-init.c
new file mode 100644
index 0000000..b4431c4
--- /dev/null
+++ b/arch/arm/mach-mxs/power-init.c
@@ -0,0 +1,1274 @@
+/*
+ * Freescale i.MX28 Boot PMIC init
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@xxxxxxxxx>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <config.h>
+#include <io.h>
+#include <mach/imx-regs.h>
+
+#include <mach/generic.h>
+#include <mach/init.h>
+#ifdef CONFIG_ARCH_IMX23
+#include <mach/regs-clkctrl-mx23.h>
+#endif
+#ifdef CONFIG_ARCH_IMX28
+#include <mach/regs-clkctrl-mx28.h>
+#endif
+#include <mach/regs-power-mx28.h>
+#include <mach/regs-rtc.h>
+#include <mach/regs-lradc.h>
+
+/*
+ * This delay function is intended to be used only in early stage of boot, where
+ * clock are not set up yet. The timer used here is reset on every boot and
+ * takes a few seconds to roll. The boot doesn't take that long, so to keep the
+ * code simple, it doesn't take rolling into consideration.
+ */
+void mxs_early_delay(int delay)
+{
+ void __iomem *digctl_regs = IOMEM(IMX_DIGCTL_BASE);
+ uint32_t st = readl(digctl_regs + 0xc0);
+
+ st += delay;
+
+ while (st > readl(digctl_regs + 0xc0));
+}
+
+static inline void charger_4p2_disable(void)
+{
+ struct mxs_power_regs *power_regs =
+ (struct mxs_power_regs *)IMX_POWER_BASE;
+
+ if (cpu_is_mx28())
+ writel(MX28_POWER_5VCTRL_PWD_CHARGE_4P2_MASK,
+ &power_regs->hw_power_5vctrl_set);
+ else
+ writel(MX23_POWER_5VCTRL_PWD_CHARGE_4P2_MASK,
+ &power_regs->hw_power_5vctrl_set);
+}
+
+static inline void charger_4p2_enable(void)
+{
+ struct mxs_power_regs *power_regs =
+ (struct mxs_power_regs *)IMX_POWER_BASE;
+
+ if (cpu_is_mx28())
+ writel(MX28_POWER_5VCTRL_PWD_CHARGE_4P2_MASK,
+ &power_regs->hw_power_5vctrl_clr);
+ else
+ writel(MX23_POWER_5VCTRL_PWD_CHARGE_4P2_MASK,
+ &power_regs->hw_power_5vctrl_clr);
+}
+
+/**
+ * mxs_power_clock2xtal() - Switch CPU core clock source to 24MHz XTAL
+ *
+ * This function switches the CPU core clock from PLL to 24MHz XTAL
+ * oscilator. This is necessary if the PLL is being reconfigured to
+ * prevent crash of the CPU core.
+ */
+static void mxs_power_clock2xtal(void)
+{
+ struct mxs_clkctrl_regs *clkctrl_regs =
+ (struct mxs_clkctrl_regs *)IMX_CCM_BASE;
+
+ /* Set XTAL as CPU reference clock */
+ writel(CLKCTRL_CLKSEQ_BYPASS_CPU,
+ &clkctrl_regs->hw_clkctrl_clkseq_set);
+}
+
+/**
+ * mxs_power_clock2pll() - Switch CPU core clock source to PLL
+ *
+ * This function switches the CPU core clock from 24MHz XTAL oscilator
+ * to PLL. This can only be called once the PLL has re-locked and once
+ * the PLL is stable after reconfiguration.
+ */
+static void mxs_power_clock2pll(void)
+{
+ struct mxs_clkctrl_regs *clkctrl_regs =
+ (struct mxs_clkctrl_regs *)IMX_CCM_BASE;
+
+ setbits_le32(&clkctrl_regs->hw_clkctrl_pll0ctrl0,
+ CLKCTRL_PLL0CTRL0_POWER);
+ mxs_early_delay(100);
+ setbits_le32(&clkctrl_regs->hw_clkctrl_clkseq,
+ CLKCTRL_CLKSEQ_BYPASS_CPU);
+}
+
+/**
+ * mxs_power_set_auto_restart() - Set the auto-restart bit
+ *
+ * This function ungates the RTC block and sets the AUTO_RESTART
+ * bit to work around a design bug on MX28EVK Rev. A .
+ */
+
+static void mxs_power_set_auto_restart(void)
+{
+ struct mxs_rtc_regs *rtc_regs =
+ (struct mxs_rtc_regs *)IMX_WDT_BASE;
+
+ writel(RTC_CTRL_SFTRST, &rtc_regs->hw_rtc_ctrl_clr);
+ while (readl(&rtc_regs->hw_rtc_ctrl) & RTC_CTRL_SFTRST)
+ ;
+
+ writel(RTC_CTRL_CLKGATE, &rtc_regs->hw_rtc_ctrl_clr);
+ while (readl(&rtc_regs->hw_rtc_ctrl) & RTC_CTRL_CLKGATE)
+ ;
+
+ /* Do nothing if flag already set */
+ if (readl(&rtc_regs->hw_rtc_persistent0) & RTC_PERSISTENT0_AUTO_RESTART)
+ return;
+
+ while (readl(&rtc_regs->hw_rtc_stat) & RTC_STAT_NEW_REGS_MASK)
+ ;
+
+ setbits_le32(&rtc_regs->hw_rtc_persistent0,
+ RTC_PERSISTENT0_AUTO_RESTART);
+ writel(RTC_CTRL_FORCE_UPDATE, &rtc_regs->hw_rtc_ctrl_set);
+ writel(RTC_CTRL_FORCE_UPDATE, &rtc_regs->hw_rtc_ctrl_clr);
+ while (readl(&rtc_regs->hw_rtc_stat) & RTC_STAT_NEW_REGS_MASK)
+ ;
+ while (readl(&rtc_regs->hw_rtc_stat) & RTC_STAT_STALE_REGS_MASK)
+ ;
+}
+
+/**
+ * mxs_power_set_linreg() - Set linear regulators 25mV below DC-DC converter
+ *
+ * This function configures the VDDIO, VDDA and VDDD linear regulators output
+ * to be 25mV below the VDDIO, VDDA and VDDD output from the DC-DC switching
+ * converter. This is the recommended setting for the case where we use both
+ * linear regulators and DC-DC converter to power the VDDIO rail.
+ */
+static void mxs_power_set_linreg(void)
+{
+ struct mxs_power_regs *power_regs =
+ (struct mxs_power_regs *)IMX_POWER_BASE;
+
+ /* Set linear regulator 25mV below switching converter */
+ clrsetbits_le32(&power_regs->hw_power_vdddctrl,
+ POWER_VDDDCTRL_LINREG_OFFSET_MASK,
+ POWER_VDDDCTRL_LINREG_OFFSET_1STEPS_BELOW);
+
+ clrsetbits_le32(&power_regs->hw_power_vddactrl,
+ POWER_VDDACTRL_LINREG_OFFSET_MASK,
+ POWER_VDDACTRL_LINREG_OFFSET_1STEPS_BELOW);
+
+ clrsetbits_le32(&power_regs->hw_power_vddioctrl,
+ POWER_VDDIOCTRL_LINREG_OFFSET_MASK,
+ POWER_VDDIOCTRL_LINREG_OFFSET_1STEPS_BELOW);
+}
+
+/**
+ * mxs_get_batt_volt() - Measure battery input voltage
+ *
+ * This function retrieves the battery input voltage and returns it.
+ */
+static int mxs_get_batt_volt(void)
+{
+ struct mxs_power_regs *power_regs =
+ (struct mxs_power_regs *)IMX_POWER_BASE;
+ uint32_t volt = readl(&power_regs->hw_power_battmonitor);
+
+ volt &= POWER_BATTMONITOR_BATT_VAL_MASK;
+ volt >>= POWER_BATTMONITOR_BATT_VAL_OFFSET;
+ volt *= 8;
+
+ return volt;
+}
+
+/**
+ * mxs_is_batt_ready() - Test if the battery provides enough voltage to boot
+ *
+ * This function checks if the battery input voltage is higher than 3.6V and
+ * therefore allows the system to successfully boot using this power source.
+ */
+static int mxs_is_batt_ready(void)
+{
+ return (mxs_get_batt_volt() >= 3600);
+}
+
+/**
+ * mxs_is_batt_good() - Test if battery is operational at all
+ *
+ * This function starts recharging the battery and tests if the input current
+ * provided by the 5V input recharging the battery is also sufficient to power
+ * the DC-DC converter.
+ */
+static int mxs_is_batt_good(void)
+{
+ struct mxs_power_regs *power_regs =
+ (struct mxs_power_regs *)IMX_POWER_BASE;
+ uint32_t volt = mxs_get_batt_volt();
+
+ if ((volt >= 2400) && (volt <= 4300))
+ return 1;
+
+ clrsetbits_le32(&power_regs->hw_power_5vctrl,
+ POWER_5VCTRL_CHARGE_4P2_ILIMIT_MASK,
+ 0x3 << POWER_5VCTRL_CHARGE_4P2_ILIMIT_OFFSET);
+ charger_4p2_enable();
+
+ clrsetbits_le32(&power_regs->hw_power_charge,
+ POWER_CHARGE_STOP_ILIMIT_MASK | POWER_CHARGE_BATTCHRG_I_MASK,
+ POWER_CHARGE_STOP_ILIMIT_10MA | 0x3);
+
+ writel(POWER_CHARGE_PWD_BATTCHRG, &power_regs->hw_power_charge_clr);
+ charger_4p2_enable();
+
+ mxs_early_delay(500000);
+
+ volt = mxs_get_batt_volt();
+
+ if (volt >= 3500)
+ return 0;
+
+ if (volt >= 2400)
+ return 1;
+
+ writel(POWER_CHARGE_STOP_ILIMIT_MASK | POWER_CHARGE_BATTCHRG_I_MASK,
+ &power_regs->hw_power_charge_clr);
+ writel(POWER_CHARGE_PWD_BATTCHRG, &power_regs->hw_power_charge_set);
+
+ return 0;
+}
+
+/**
+ * mxs_power_setup_5v_detect() - Start the 5V input detection comparator
+ *
+ * This function enables the 5V detection comparator and sets the 5V valid
+ * threshold to 4.4V . We use 4.4V threshold here to make sure that even
+ * under high load, the voltage drop on the 5V input won't be so critical
+ * to cause undervolt on the 4P2 linear regulator supplying the DC-DC
+ * converter and thus making the system crash.
+ */
+static void mxs_power_setup_5v_detect(void)
+{
+ struct mxs_power_regs *power_regs =
+ (struct mxs_power_regs *)IMX_POWER_BASE;
+
+ /* Start 5V detection */
+ clrsetbits_le32(&power_regs->hw_power_5vctrl,
+ POWER_5VCTRL_VBUSVALID_TRSH_MASK,
+ POWER_5VCTRL_VBUSVALID_TRSH_4V4 |
+ POWER_5VCTRL_PWRUP_VBUS_CMPS);
+}
+
+/**
+ * mxs_src_power_init() - Preconfigure the power block
+ *
+ * This function configures reasonable values for the DC-DC control loop
+ * and battery monitor.
+ */
+static void mxs_src_power_init(void)
+{
+ struct mxs_power_regs *power_regs =
+ (struct mxs_power_regs *)IMX_POWER_BASE;
+
+ /* Improve efficieny and reduce transient ripple */
+ writel(POWER_LOOPCTRL_TOGGLE_DIF | POWER_LOOPCTRL_EN_CM_HYST |
+ POWER_LOOPCTRL_EN_DF_HYST, &power_regs->hw_power_loopctrl_set);
+
+ clrsetbits_le32(&power_regs->hw_power_dclimits,
+ POWER_DCLIMITS_POSLIMIT_BUCK_MASK,
+ 0x30 << POWER_DCLIMITS_POSLIMIT_BUCK_OFFSET);
+
+ setbits_le32(&power_regs->hw_power_battmonitor,
+ POWER_BATTMONITOR_EN_BATADJ);
+
+ /* Increase the RCSCALE level for quick DCDC response to dynamic load */
+ clrsetbits_le32(&power_regs->hw_power_loopctrl,
+ POWER_LOOPCTRL_EN_RCSCALE_MASK,
+ POWER_LOOPCTRL_RCSCALE_THRESH |
+ POWER_LOOPCTRL_EN_RCSCALE_8X);
+
+ clrsetbits_le32(&power_regs->hw_power_minpwr,
+ POWER_MINPWR_HALFFETS, POWER_MINPWR_DOUBLE_FETS);
+
+ /* 5V to battery handoff ... FIXME */
+ setbits_le32(&power_regs->hw_power_5vctrl, POWER_5VCTRL_DCDC_XFER);
+ mxs_early_delay(30);
+ clrbits_le32(&power_regs->hw_power_5vctrl, POWER_5VCTRL_DCDC_XFER);
+}
+
+/**
+ * mxs_power_init_4p2_params() - Configure the parameters of the 4P2 regulator
+ *
+ * This function configures the necessary parameters for the 4P2 linear
+ * regulator to supply the DC-DC converter from 5V input.
+ */
+static void mxs_power_init_4p2_params(void)
+{
+ struct mxs_power_regs *power_regs =
+ (struct mxs_power_regs *)IMX_POWER_BASE;
+
+ /* Setup 4P2 parameters */
+ clrsetbits_le32(&power_regs->hw_power_dcdc4p2,
+ POWER_DCDC4P2_CMPTRIP_MASK | POWER_DCDC4P2_TRG_MASK,
+ POWER_DCDC4P2_TRG_4V2 | (31 << POWER_DCDC4P2_CMPTRIP_OFFSET));
+
+ clrsetbits_le32(&power_regs->hw_power_5vctrl,
+ POWER_5VCTRL_HEADROOM_ADJ_MASK,
+ 0x4 << POWER_5VCTRL_HEADROOM_ADJ_OFFSET);
+
+ clrsetbits_le32(&power_regs->hw_power_dcdc4p2,
+ POWER_DCDC4P2_DROPOUT_CTRL_MASK,
+ POWER_DCDC4P2_DROPOUT_CTRL_100MV |
+ POWER_DCDC4P2_DROPOUT_CTRL_SRC_SEL);
+
+ clrsetbits_le32(&power_regs->hw_power_5vctrl,
+ POWER_5VCTRL_CHARGE_4P2_ILIMIT_MASK,
+ 0x3f << POWER_5VCTRL_CHARGE_4P2_ILIMIT_OFFSET);
+}
+
+/**
+ * mxs_enable_4p2_dcdc_input() - Enable or disable the DCDC input from 4P2
+ * @xfer: Select if the input shall be enabled or disabled
+ *
+ * This function enables or disables the 4P2 input into the DC-DC converter.
+ */
+static void mxs_enable_4p2_dcdc_input(int xfer)
+{
+ struct mxs_power_regs *power_regs =
+ (struct mxs_power_regs *)IMX_POWER_BASE;
+ uint32_t tmp, vbus_thresh, vbus_5vdetect, pwd_bo;
+ uint32_t prev_5v_brnout, prev_5v_droop;
+
+ prev_5v_brnout = readl(&power_regs->hw_power_5vctrl) &
+ POWER_5VCTRL_PWDN_5VBRNOUT;
+ prev_5v_droop = readl(&power_regs->hw_power_ctrl) &
+ POWER_CTRL_ENIRQ_VDD5V_DROOP;
+
+ clrbits_le32(&power_regs->hw_power_5vctrl, POWER_5VCTRL_PWDN_5VBRNOUT);
+ writel(POWER_RESET_UNLOCK_KEY | POWER_RESET_PWD_OFF,
+ &power_regs->hw_power_reset);
+
+ clrbits_le32(&power_regs->hw_power_ctrl, POWER_CTRL_ENIRQ_VDD5V_DROOP);
+
+ if (xfer && (readl(&power_regs->hw_power_5vctrl) &
+ POWER_5VCTRL_ENABLE_DCDC)) {
+ return;
+ }
+
+ /*
+ * Recording orignal values that will be modified temporarlily
+ * to handle a chip bug. See chip errata for CQ ENGR00115837
+ */
+ tmp = readl(&power_regs->hw_power_5vctrl);
+ vbus_thresh = tmp & POWER_5VCTRL_VBUSVALID_TRSH_MASK;
+ vbus_5vdetect = tmp & POWER_5VCTRL_VBUSVALID_5VDETECT;
+
+ pwd_bo = readl(&power_regs->hw_power_minpwr) & POWER_MINPWR_PWD_BO;
+
+ /*
+ * Disable mechanisms that get erroneously tripped by when setting
+ * the DCDC4P2 EN_DCDC
+ */
+ clrbits_le32(&power_regs->hw_power_5vctrl,
+ POWER_5VCTRL_VBUSVALID_5VDETECT |
+ POWER_5VCTRL_VBUSVALID_TRSH_MASK);
+
+ writel(POWER_MINPWR_PWD_BO, &power_regs->hw_power_minpwr_set);
+
+ if (xfer) {
+ setbits_le32(&power_regs->hw_power_5vctrl,
+ POWER_5VCTRL_DCDC_XFER);
+ mxs_early_delay(20);
+ clrbits_le32(&power_regs->hw_power_5vctrl,
+ POWER_5VCTRL_DCDC_XFER);
+
+ setbits_le32(&power_regs->hw_power_5vctrl,
+ POWER_5VCTRL_ENABLE_DCDC);
+ } else {
+ setbits_le32(&power_regs->hw_power_dcdc4p2,
+ POWER_DCDC4P2_ENABLE_DCDC);
+ }
+
+ mxs_early_delay(25);
+
+ clrsetbits_le32(&power_regs->hw_power_5vctrl,
+ POWER_5VCTRL_VBUSVALID_TRSH_MASK, vbus_thresh);
+
+ if (vbus_5vdetect)
+ writel(vbus_5vdetect, &power_regs->hw_power_5vctrl_set);
+
+ if (!pwd_bo)
+ clrbits_le32(&power_regs->hw_power_minpwr, POWER_MINPWR_PWD_BO);
+
+ while (readl(&power_regs->hw_power_ctrl) & POWER_CTRL_VBUS_VALID_IRQ)
+ writel(POWER_CTRL_VBUS_VALID_IRQ,
+ &power_regs->hw_power_ctrl_clr);
+
+ if (prev_5v_brnout) {
+ writel(POWER_5VCTRL_PWDN_5VBRNOUT,
+ &power_regs->hw_power_5vctrl_set);
+ writel(POWER_RESET_UNLOCK_KEY,
+ &power_regs->hw_power_reset);
+ } else {
+ writel(POWER_5VCTRL_PWDN_5VBRNOUT,
+ &power_regs->hw_power_5vctrl_clr);
+ writel(POWER_RESET_UNLOCK_KEY | POWER_RESET_PWD_OFF,
+ &power_regs->hw_power_reset);
+ }
+
+ while (readl(&power_regs->hw_power_ctrl) & POWER_CTRL_VDD5V_DROOP_IRQ)
+ writel(POWER_CTRL_VDD5V_DROOP_IRQ,
+ &power_regs->hw_power_ctrl_clr);
+
+ if (prev_5v_droop)
+ clrbits_le32(&power_regs->hw_power_ctrl,
+ POWER_CTRL_ENIRQ_VDD5V_DROOP);
+ else
+ setbits_le32(&power_regs->hw_power_ctrl,
+ POWER_CTRL_ENIRQ_VDD5V_DROOP);
+}
+
+/**
+ * mxs_power_init_4p2_regulator() - Start the 4P2 regulator
+ *
+ * This function enables the 4P2 regulator and switches the DC-DC converter
+ * to use the 4P2 input.
+ */
+static void mxs_power_init_4p2_regulator(void)
+{
+ struct mxs_power_regs *power_regs =
+ (struct mxs_power_regs *)IMX_POWER_BASE;
+ uint32_t tmp, tmp2;
+
+ setbits_le32(&power_regs->hw_power_dcdc4p2, POWER_DCDC4P2_ENABLE_4P2);
+
+ writel(POWER_CHARGE_ENABLE_LOAD, &power_regs->hw_power_charge_set);
+
+ writel(POWER_5VCTRL_CHARGE_4P2_ILIMIT_MASK,
+ &power_regs->hw_power_5vctrl_clr);
+ clrbits_le32(&power_regs->hw_power_dcdc4p2, POWER_DCDC4P2_TRG_MASK);
+
+ /* Power up the 4p2 rail and logic/control */
+ charger_4p2_enable();
+
+ /*
+ * Start charging up the 4p2 capacitor. We ramp of this charge
+ * gradually to avoid large inrush current from the 5V cable which can
+ * cause transients/problems
+ */
+ mxs_enable_4p2_dcdc_input(0);
+
+ if (readl(&power_regs->hw_power_ctrl) & POWER_CTRL_VBUS_VALID_IRQ) {
+ /*
+ * If we arrived here, we were unable to recover from mx23 chip
+ * errata 5837. 4P2 is disabled and sufficient battery power is
+ * not present. Exiting to not enable DCDC power during 5V
+ * connected state.
+ */
+ clrbits_le32(&power_regs->hw_power_dcdc4p2,
+ POWER_DCDC4P2_ENABLE_DCDC);
+ charger_4p2_disable();
+ hang();
+ }
+
+ /*
+ * Here we set the 4p2 brownout level to something very close to 4.2V.
+ * We then check the brownout status. If the brownout status is false,
+ * the voltage is already close to the target voltage of 4.2V so we
+ * can go ahead and set the 4P2 current limit to our max target limit.
+ * If the brownout status is true, we need to ramp us the current limit
+ * so that we don't cause large inrush current issues. We step up the
+ * current limit until the brownout status is false or until we've
+ * reached our maximum defined 4p2 current limit.
+ */
+ clrsetbits_le32(&power_regs->hw_power_dcdc4p2,
+ POWER_DCDC4P2_BO_MASK,
+ 22 << POWER_DCDC4P2_BO_OFFSET); /* 4.15V */
+
+ if (!(readl(&power_regs->hw_power_sts) & POWER_STS_DCDC_4P2_BO)) {
+ setbits_le32(&power_regs->hw_power_5vctrl,
+ 0x3f << POWER_5VCTRL_CHARGE_4P2_ILIMIT_OFFSET);
+ } else {
+ tmp = (readl(&power_regs->hw_power_5vctrl) &
+ POWER_5VCTRL_CHARGE_4P2_ILIMIT_MASK) >>
+ POWER_5VCTRL_CHARGE_4P2_ILIMIT_OFFSET;
+ while (tmp < 0x3f) {
+ if (!(readl(&power_regs->hw_power_sts) &
+ POWER_STS_DCDC_4P2_BO)) {
+ tmp = readl(&power_regs->hw_power_5vctrl);
+ tmp |= POWER_5VCTRL_CHARGE_4P2_ILIMIT_MASK;
+ mxs_early_delay(100);
+ writel(tmp, &power_regs->hw_power_5vctrl);
+ break;
+ } else {
+ tmp++;
+ tmp2 = readl(&power_regs->hw_power_5vctrl);
+ tmp2 &= ~POWER_5VCTRL_CHARGE_4P2_ILIMIT_MASK;
+ tmp2 |= tmp <<
+ POWER_5VCTRL_CHARGE_4P2_ILIMIT_OFFSET;
+ writel(tmp2, &power_regs->hw_power_5vctrl);
+ mxs_early_delay(100);
+ }
+ }
+ }
+
+ clrbits_le32(&power_regs->hw_power_dcdc4p2, POWER_DCDC4P2_BO_MASK);
+ writel(POWER_CTRL_DCDC4P2_BO_IRQ, &power_regs->hw_power_ctrl_clr);
+}
+
+/**
+ * mxs_power_init_dcdc_4p2_source() - Switch DC-DC converter to 4P2 source
+ *
+ * This function configures the DC-DC converter to be supplied from the 4P2
+ * linear regulator.
+ */
+static void mxs_power_init_dcdc_4p2_source(void)
+{
+ struct mxs_power_regs *power_regs =
+ (struct mxs_power_regs *)IMX_POWER_BASE;
+
+ if (!(readl(&power_regs->hw_power_dcdc4p2) &
+ POWER_DCDC4P2_ENABLE_DCDC)) {
+ hang();
+ }
+
+ mxs_enable_4p2_dcdc_input(1);
+
+ if (readl(&power_regs->hw_power_ctrl) & POWER_CTRL_VBUS_VALID_IRQ) {
+ clrbits_le32(&power_regs->hw_power_dcdc4p2,
+ POWER_DCDC4P2_ENABLE_DCDC);
+ writel(POWER_5VCTRL_ENABLE_DCDC,
+ &power_regs->hw_power_5vctrl_clr);
+ charger_4p2_disable();
+ }
+}
+
+/**
+ * mxs_power_enable_4p2() - Power up the 4P2 regulator
+ *
+ * This function drives the process of powering up the 4P2 linear regulator
+ * and switching the DC-DC converter input over to the 4P2 linear regulator.
+ */
+static void mxs_power_enable_4p2(void)
+{
+ struct mxs_power_regs *power_regs =
+ (struct mxs_power_regs *)IMX_POWER_BASE;
+ uint32_t vdddctrl, vddactrl, vddioctrl;
+ uint32_t tmp;
+
+ vdddctrl = readl(&power_regs->hw_power_vdddctrl);
+ vddactrl = readl(&power_regs->hw_power_vddactrl);
+ vddioctrl = readl(&power_regs->hw_power_vddioctrl);
+
+ setbits_le32(&power_regs->hw_power_vdddctrl,
+ POWER_VDDDCTRL_DISABLE_FET | POWER_VDDDCTRL_ENABLE_LINREG |
+ POWER_VDDDCTRL_PWDN_BRNOUT);
+
+ setbits_le32(&power_regs->hw_power_vddactrl,
+ POWER_VDDACTRL_DISABLE_FET | POWER_VDDACTRL_ENABLE_LINREG |
+ POWER_VDDACTRL_PWDN_BRNOUT);
+
+ setbits_le32(&power_regs->hw_power_vddioctrl,
+ POWER_VDDIOCTRL_DISABLE_FET | POWER_VDDIOCTRL_PWDN_BRNOUT);
+
+ mxs_power_init_4p2_params();
+ mxs_power_init_4p2_regulator();
+
+ /* Shutdown battery (none present) */
+ if (!mxs_is_batt_ready()) {
+ clrbits_le32(&power_regs->hw_power_dcdc4p2,
+ POWER_DCDC4P2_BO_MASK);
+ writel(POWER_CTRL_DCDC4P2_BO_IRQ,
+ &power_regs->hw_power_ctrl_clr);
+ writel(POWER_CTRL_ENIRQ_DCDC4P2_BO,
+ &power_regs->hw_power_ctrl_clr);
+ }
+
+ mxs_power_init_dcdc_4p2_source();
+
+ writel(vdddctrl, &power_regs->hw_power_vdddctrl);
+ mxs_early_delay(20);
+ writel(vddactrl, &power_regs->hw_power_vddactrl);
+ mxs_early_delay(20);
+ writel(vddioctrl, &power_regs->hw_power_vddioctrl);
+
+ /*
+ * Check if FET is enabled on either powerout and if so,
+ * disable load.
+ */
+ tmp = 0;
+ tmp |= !(readl(&power_regs->hw_power_vdddctrl) &
+ POWER_VDDDCTRL_DISABLE_FET);
+ tmp |= !(readl(&power_regs->hw_power_vddactrl) &
+ POWER_VDDACTRL_DISABLE_FET);
+ tmp |= !(readl(&power_regs->hw_power_vddioctrl) &
+ POWER_VDDIOCTRL_DISABLE_FET);
+ if (tmp)
+ writel(POWER_CHARGE_ENABLE_LOAD,
+ &power_regs->hw_power_charge_clr);
+}
+
+/**
+ * mxs_boot_valid_5v() - Boot from 5V supply
+ *
+ * This function configures the power block to boot from valid 5V input.
+ * This is called only if the 5V is reliable and can properly supply the
+ * CPU. This function proceeds to configure the 4P2 converter to be supplied
+ * from the 5V input.
+ */
+static void mxs_boot_valid_5v(void)
+{
+ struct mxs_power_regs *power_regs =
+ (struct mxs_power_regs *)IMX_POWER_BASE;
+
+ /*
+ * Use VBUSVALID level instead of VDD5V_GT_VDDIO level to trigger a 5V
+ * disconnect event. FIXME
+ */
+ writel(POWER_5VCTRL_VBUSVALID_5VDETECT,
+ &power_regs->hw_power_5vctrl_set);
+
+ /* Configure polarity to check for 5V disconnection. */
+ writel(POWER_CTRL_POLARITY_VBUSVALID |
+ POWER_CTRL_POLARITY_VDD5V_GT_VDDIO,
+ &power_regs->hw_power_ctrl_clr);
+
+ writel(POWER_CTRL_VBUS_VALID_IRQ | POWER_CTRL_VDD5V_GT_VDDIO_IRQ,
+ &power_regs->hw_power_ctrl_clr);
+
+ mxs_power_enable_4p2();
+}
+
+/**
+ * mxs_powerdown() - Shut down the system
+ *
+ * This function powers down the CPU completely.
+ */
+static void mxs_powerdown(void)
+{
+ struct mxs_power_regs *power_regs =
+ (struct mxs_power_regs *)IMX_POWER_BASE;
+ writel(POWER_RESET_UNLOCK_KEY, &power_regs->hw_power_reset);
+ writel(POWER_RESET_UNLOCK_KEY | POWER_RESET_PWD_OFF,
+ &power_regs->hw_power_reset);
+}
+
+/**
+ * mxs_enable_battery_input() - Configure the power block to boot from battery input
+ *
+ * This function configures the power block to boot from the battery voltage
+ * supply.
+ */
+static void mxs_enable_battery_input(void)
+{
+ struct mxs_power_regs *power_regs =
+ (struct mxs_power_regs *)IMX_POWER_BASE;
+
+ clrbits_le32(&power_regs->hw_power_5vctrl, POWER_5VCTRL_PWDN_5VBRNOUT);
+ clrbits_le32(&power_regs->hw_power_5vctrl, POWER_5VCTRL_ENABLE_DCDC);
+
+ clrbits_le32(&power_regs->hw_power_dcdc4p2,
+ POWER_DCDC4P2_ENABLE_DCDC | POWER_DCDC4P2_ENABLE_4P2);
+ writel(POWER_CHARGE_ENABLE_LOAD, &power_regs->hw_power_charge_clr);
+
+ /* 5V to battery handoff. */
+ setbits_le32(&power_regs->hw_power_5vctrl, POWER_5VCTRL_DCDC_XFER);
+ mxs_early_delay(30);
+ clrbits_le32(&power_regs->hw_power_5vctrl, POWER_5VCTRL_DCDC_XFER);
+
+ writel(POWER_CTRL_ENIRQ_DCDC4P2_BO, &power_regs->hw_power_ctrl_clr);
+
+ clrsetbits_le32(&power_regs->hw_power_minpwr,
+ POWER_MINPWR_HALFFETS, POWER_MINPWR_DOUBLE_FETS);
+
+ mxs_power_set_linreg();
+
+ clrbits_le32(&power_regs->hw_power_vdddctrl,
+ POWER_VDDDCTRL_DISABLE_FET | POWER_VDDDCTRL_ENABLE_LINREG);
+
+ clrbits_le32(&power_regs->hw_power_vddactrl,
+ POWER_VDDACTRL_DISABLE_FET | POWER_VDDACTRL_ENABLE_LINREG);
+
+ clrbits_le32(&power_regs->hw_power_vddioctrl,
+ POWER_VDDIOCTRL_DISABLE_FET);
+
+ charger_4p2_disable();
+
+ setbits_le32(&power_regs->hw_power_5vctrl,
+ POWER_5VCTRL_ENABLE_DCDC);
+
+ clrsetbits_le32(&power_regs->hw_power_5vctrl,
+ POWER_5VCTRL_CHARGE_4P2_ILIMIT_MASK,
+ 0x8 << POWER_5VCTRL_CHARGE_4P2_ILIMIT_OFFSET);
+
+ mxs_power_enable_4p2();
+}
+
+/**
+ * mxs_handle_5v_conflict() - Test if the 5V input is reliable
+ *
+ * This function tests if the 5V input can reliably supply the system. If it
+ * can, then proceed to configuring the system to boot from 5V source, otherwise
+ * try booting from battery supply. If we can not boot from battery supply
+ * either, shut down the system.
+ */
+static void mxs_handle_5v_conflict(void)
+{
+ struct mxs_power_regs *power_regs =
+ (struct mxs_power_regs *)IMX_POWER_BASE;
+ uint32_t tmp;
+
+ setbits_le32(&power_regs->hw_power_vddioctrl,
+ POWER_VDDIOCTRL_BO_OFFSET_MASK);
+
+ for (;;) {
+ tmp = readl(&power_regs->hw_power_sts);
+
+ if (tmp & POWER_STS_VDDIO_BO) {
+ /*
+ * VDDIO has a brownout, then the VDD5V_GT_VDDIO becomes
+ * unreliable
+ */
+ mxs_powerdown();
+ break;
+ }
+
+ if (tmp & POWER_STS_VDD5V_GT_VDDIO) {
+ mxs_boot_valid_5v();
+ break;
+ } else {
+ mxs_powerdown();
+ break;
+ }
+
+ if (tmp & POWER_STS_PSWITCH_MASK) {
+ mxs_enable_battery_input();
+ break;
+ }
+ }
+}
+
+/**
+ * mxs_5v_boot() - Configure the power block to boot from 5V input
+ *
+ * This function handles configuration of the power block when supplied by
+ * a 5V input.
+ */
+static void mxs_5v_boot(void)
+{
+ struct mxs_power_regs *power_regs =
+ (struct mxs_power_regs *)IMX_POWER_BASE;
+
+ /*
+ * NOTE: In original IMX-Bootlets, this also checks for VBUSVALID,
+ * but their implementation always returns 1 so we omit it here.
+ */
+ if (readl(&power_regs->hw_power_sts) & POWER_STS_VDD5V_GT_VDDIO) {
+ mxs_boot_valid_5v();
+ return;
+ }
+
+ mxs_early_delay(1000);
+ if (readl(&power_regs->hw_power_sts) & POWER_STS_VDD5V_GT_VDDIO) {
+ mxs_boot_valid_5v();
+ return;
+ }
+
+ mxs_handle_5v_conflict();
+}
+
+/**
+ * mxs_init_batt_bo() - Configure battery brownout threshold
+ *
+ * This function configures the battery input brownout threshold. The value
+ * at which the battery brownout happens is configured to 3.0V in the code.
+ */
+static void mxs_init_batt_bo(void)
+{
+ struct mxs_power_regs *power_regs =
+ (struct mxs_power_regs *)IMX_POWER_BASE;
+
+ /* Brownout at 3V */
+ clrsetbits_le32(&power_regs->hw_power_battmonitor,
+ POWER_BATTMONITOR_BRWNOUT_LVL_MASK,
+ 15 << POWER_BATTMONITOR_BRWNOUT_LVL_OFFSET);
+
+ writel(POWER_CTRL_BATT_BO_IRQ, &power_regs->hw_power_ctrl_clr);
+ writel(POWER_CTRL_ENIRQ_BATT_BO, &power_regs->hw_power_ctrl_clr);
+}
+
+/**
+ * mxs_switch_vddd_to_dcdc_source() - Switch VDDD rail to DC-DC converter
+ *
+ * This function turns off the VDDD linear regulator and therefore makes
+ * the VDDD rail be supplied only by the DC-DC converter.
+ */
+static void mxs_switch_vddd_to_dcdc_source(void)
+{
+ struct mxs_power_regs *power_regs =
+ (struct mxs_power_regs *)IMX_POWER_BASE;
+
+ clrsetbits_le32(&power_regs->hw_power_vdddctrl,
+ POWER_VDDDCTRL_LINREG_OFFSET_MASK,
+ POWER_VDDDCTRL_LINREG_OFFSET_1STEPS_BELOW);
+
+ clrbits_le32(&power_regs->hw_power_vdddctrl,
+ POWER_VDDDCTRL_DISABLE_FET | POWER_VDDDCTRL_ENABLE_LINREG |
+ POWER_VDDDCTRL_DISABLE_STEPPING);
+}
+
+/**
+ * mxs_power_configure_power_source() - Configure power block source
+ *
+ * This function is the core of the power configuration logic. The function
+ * selects the power block input source and configures the whole power block
+ * accordingly. After the configuration is complete and the system is stable
+ * again, the function switches the CPU clock source back to PLL. Finally,
+ * the function switches the voltage rails to DC-DC converter.
+ */
+static void mxs_power_configure_power_source(void)
+{
+ struct mxs_power_regs *power_regs =
+ (struct mxs_power_regs *)IMX_POWER_BASE;
+ struct mxs_lradc_regs *lradc_regs =
+ (struct mxs_lradc_regs *)IMX_LRADC_BASE;
+
+ if (!(readl(&power_regs->hw_power_sts) & POWER_STS_VDD5V_GT_VDDIO)) {
+ /* 5V not detected, booting from battery. */
+ mxs_enable_battery_input();
+ return;
+ }
+
+ if (mxs_is_batt_ready()) {
+ /* 5V source detected, good battery detected. */
+ mxs_enable_battery_input();
+ return;
+ }
+
+ if (!mxs_is_batt_good()) {
+ /* 5V source detected, bad battery detected. */
+ writel(LRADC_CONVERSION_AUTOMATIC,
+ &lradc_regs->hw_lradc_conversion_clr);
+ clrbits_le32(&power_regs->hw_power_battmonitor,
+ POWER_BATTMONITOR_BATT_VAL_MASK);
+ }
+ mxs_5v_boot();
+}
+
+/**
+ * mxs_enable_output_rail_protection() - Enable power rail protection
+ *
+ * This function enables overload protection on the power rails. This is
+ * triggered if the power rails' voltage drops rapidly due to overload and
+ * in such case, the supply to the powerrail is cut-off, protecting the
+ * CPU from damage. Note that under such condition, the system will likely
+ * crash or misbehave.
+ */
+static void mxs_enable_output_rail_protection(void)
+{
+ struct mxs_power_regs *power_regs =
+ (struct mxs_power_regs *)IMX_POWER_BASE;
+
+ writel(POWER_CTRL_VDDD_BO_IRQ | POWER_CTRL_VDDA_BO_IRQ |
+ POWER_CTRL_VDDIO_BO_IRQ, &power_regs->hw_power_ctrl_clr);
+
+ setbits_le32(&power_regs->hw_power_vdddctrl,
+ POWER_VDDDCTRL_PWDN_BRNOUT);
+
+ setbits_le32(&power_regs->hw_power_vddactrl,
+ POWER_VDDACTRL_PWDN_BRNOUT);
+
+ setbits_le32(&power_regs->hw_power_vddioctrl,
+ POWER_VDDIOCTRL_PWDN_BRNOUT);
+}
+
+/**
+ * mxs_get_vddio_power_source_off() - Get VDDIO rail power source
+ *
+ * This function tests if the VDDIO rail is supplied by linear regulator
+ * or by the DC-DC converter. Returns 1 if powered by linear regulator,
+ * returns 0 if powered by the DC-DC converter.
+ */
+static int mxs_get_vddio_power_source_off(void)
+{
+ struct mxs_power_regs *power_regs =
+ (struct mxs_power_regs *)IMX_POWER_BASE;
+ uint32_t tmp;
+
+ if (readl(&power_regs->hw_power_sts) & POWER_STS_VDD5V_GT_VDDIO) {
+ tmp = readl(&power_regs->hw_power_vddioctrl);
+ if (tmp & POWER_VDDIOCTRL_DISABLE_FET) {
+ if ((tmp & POWER_VDDIOCTRL_LINREG_OFFSET_MASK) ==
+ POWER_VDDIOCTRL_LINREG_OFFSET_0STEPS) {
+ return 1;
+ }
+ }
+
+ if (!(readl(&power_regs->hw_power_5vctrl) &
+ POWER_5VCTRL_ENABLE_DCDC)) {
+ if ((tmp & POWER_VDDIOCTRL_LINREG_OFFSET_MASK) ==
+ POWER_VDDIOCTRL_LINREG_OFFSET_0STEPS) {
+ return 1;
+ }
+ }
+ }
+
+ return 0;
+
+}
+
+/**
+ * mxs_get_vddd_power_source_off() - Get VDDD rail power source
+ *
+ * This function tests if the VDDD rail is supplied by linear regulator
+ * or by the DC-DC converter. Returns 1 if powered by linear regulator,
+ * returns 0 if powered by the DC-DC converter.
+ */
+static int mxs_get_vddd_power_source_off(void)
+{
+ struct mxs_power_regs *power_regs =
+ (struct mxs_power_regs *)IMX_POWER_BASE;
+ uint32_t tmp;
+
+ tmp = readl(&power_regs->hw_power_vdddctrl);
+ if (tmp & POWER_VDDDCTRL_DISABLE_FET) {
+ if ((tmp & POWER_VDDDCTRL_LINREG_OFFSET_MASK) ==
+ POWER_VDDDCTRL_LINREG_OFFSET_0STEPS) {
+ return 1;
+ }
+ }
+
+ if (readl(&power_regs->hw_power_sts) & POWER_STS_VDD5V_GT_VDDIO) {
+ if (!(readl(&power_regs->hw_power_5vctrl) &
+ POWER_5VCTRL_ENABLE_DCDC)) {
+ return 1;
+ }
+ }
+
+ if (!(tmp & POWER_VDDDCTRL_ENABLE_LINREG)) {
+ if ((tmp & POWER_VDDDCTRL_LINREG_OFFSET_MASK) ==
+ POWER_VDDDCTRL_LINREG_OFFSET_1STEPS_BELOW) {
+ return 1;
+ }
+ }
+
+ return 0;
+}
+
+struct mxs_vddx_cfg {
+ uint32_t *reg;
+ uint8_t step_mV;
+ uint16_t lowest_mV;
+ int (*powered_by_linreg)(void);
+ uint32_t trg_mask;
+ uint32_t bo_irq;
+ uint32_t bo_enirq;
+ uint32_t bo_offset_mask;
+ uint32_t bo_offset_offset;
+};
+
+static const struct mxs_vddx_cfg mx23_vddio_cfg = {
+ .reg = &(((struct mxs_power_regs *)IMX_POWER_BASE)->
+ hw_power_vddioctrl),
+ .step_mV = 25,
+ .lowest_mV = 2800,
+ .powered_by_linreg = mxs_get_vddio_power_source_off,
+ .trg_mask = POWER_VDDIOCTRL_TRG_MASK,
+ .bo_irq = POWER_CTRL_VDDIO_BO_IRQ,
+ .bo_enirq = POWER_CTRL_ENIRQ_VDDIO_BO,
+ .bo_offset_mask = POWER_VDDIOCTRL_BO_OFFSET_MASK,
+ .bo_offset_offset = POWER_VDDIOCTRL_BO_OFFSET_OFFSET,
+};
+
+static const struct mxs_vddx_cfg mx28_vddio_cfg = {
+ .reg = &(((struct mxs_power_regs *)IMX_POWER_BASE)->
+ hw_power_vddioctrl),
+ .step_mV = 50,
+ .lowest_mV = 2800,
+ .powered_by_linreg = mxs_get_vddio_power_source_off,
+ .trg_mask = POWER_VDDIOCTRL_TRG_MASK,
+ .bo_irq = POWER_CTRL_VDDIO_BO_IRQ,
+ .bo_enirq = POWER_CTRL_ENIRQ_VDDIO_BO,
+ .bo_offset_mask = POWER_VDDIOCTRL_BO_OFFSET_MASK,
+ .bo_offset_offset = POWER_VDDIOCTRL_BO_OFFSET_OFFSET,
+};
+
+static const struct mxs_vddx_cfg mxs_vddd_cfg = {
+ .reg = &(((struct mxs_power_regs *)IMX_POWER_BASE)->
+ hw_power_vdddctrl),
+ .step_mV = 25,
+ .lowest_mV = 800,
+ .powered_by_linreg = mxs_get_vddd_power_source_off,
+ .trg_mask = POWER_VDDDCTRL_TRG_MASK,
+ .bo_irq = POWER_CTRL_VDDD_BO_IRQ,
+ .bo_enirq = POWER_CTRL_ENIRQ_VDDD_BO,
+ .bo_offset_mask = POWER_VDDDCTRL_BO_OFFSET_MASK,
+ .bo_offset_offset = POWER_VDDDCTRL_BO_OFFSET_OFFSET,
+};
+
+static const struct mxs_vddx_cfg mxs_vddmem_cfg = {
+ .reg = &(((struct mxs_power_regs *)IMX_POWER_BASE)->
+ hw_power_vddmemctrl),
+ .step_mV = 50,
+ .lowest_mV = 1700,
+ .powered_by_linreg = NULL,
+ .trg_mask = POWER_VDDMEMCTRL_TRG_MASK,
+ .bo_irq = 0,
+ .bo_enirq = 0,
+ .bo_offset_mask = 0,
+ .bo_offset_offset = 0,
+};
+
+/**
+ * mxs_power_set_vddx() - Configure voltage on DC-DC converter rail
+ * @cfg: Configuration data of the DC-DC converter rail
+ * @new_target: New target voltage of the DC-DC converter rail
+ * @new_brownout: New brownout trigger voltage
+ *
+ * This function configures the output voltage on the DC-DC converter rail.
+ * The rail is selected by the @cfg argument. The new voltage target is
+ * selected by the @new_target and the voltage is specified in mV. The
+ * new brownout value is selected by the @new_brownout argument and the
+ * value is also in mV.
+ */
+static void mxs_power_set_vddx(const struct mxs_vddx_cfg *cfg,
+ uint32_t new_target, uint32_t new_brownout)
+{
+ struct mxs_power_regs *power_regs =
+ (struct mxs_power_regs *)IMX_POWER_BASE;
+ uint32_t cur_target, diff, bo_int = 0;
+ uint32_t powered_by_linreg = 0;
+ int adjust_up, tmp;
+
+ new_brownout = DIV_ROUND_CLOSEST(new_target - new_brownout, cfg->step_mV);
+
+ cur_target = readl(cfg->reg);
+ cur_target &= cfg->trg_mask;
+ cur_target *= cfg->step_mV;
+ cur_target += cfg->lowest_mV;
+
+ adjust_up = new_target > cur_target;
+ if (cfg->powered_by_linreg)
+ powered_by_linreg = cfg->powered_by_linreg();
+
+ if (adjust_up && cfg->bo_irq) {
+ if (powered_by_linreg) {
+ bo_int = readl(cfg->reg);
+ clrbits_le32(cfg->reg, cfg->bo_enirq);
+ }
+ setbits_le32(cfg->reg, cfg->bo_offset_mask);
+ }
+
+ do {
+ if (abs(new_target - cur_target) > 100) {
+ if (adjust_up)
+ diff = cur_target + 100;
+ else
+ diff = cur_target - 100;
+ } else {
+ diff = new_target;
+ }
+
+ diff -= cfg->lowest_mV;
+ diff /= cfg->step_mV;
+
+ clrsetbits_le32(cfg->reg, cfg->trg_mask, diff);
+
+ if (powered_by_linreg ||
+ (readl(&power_regs->hw_power_sts) &
+ POWER_STS_VDD5V_GT_VDDIO))
+ mxs_early_delay(500);
+ else {
+ for (;;) {
+ tmp = readl(&power_regs->hw_power_sts);
+ if (tmp & POWER_STS_DC_OK)
+ break;
+ }
+ }
+
+ cur_target = readl(cfg->reg);
+ cur_target &= cfg->trg_mask;
+ cur_target *= cfg->step_mV;
+ cur_target += cfg->lowest_mV;
+ } while (new_target > cur_target);
+
+ if (cfg->bo_irq) {
+ if (adjust_up && powered_by_linreg) {
+ writel(cfg->bo_irq, &power_regs->hw_power_ctrl_clr);
+ if (bo_int & cfg->bo_enirq)
+ setbits_le32(cfg->reg, cfg->bo_enirq);
+ }
+
+ clrsetbits_le32(cfg->reg, cfg->bo_offset_mask,
+ new_brownout << cfg->bo_offset_offset);
+ }
+}
+
+/**
+ * mxs_setup_batt_detect() - Start the battery voltage measurement logic
+ *
+ * This function starts and configures the LRADC block. This allows the
+ * power initialization code to measure battery voltage and based on this
+ * knowledge, decide whether to boot at all, boot from battery or boot
+ * from 5V input.
+ */
+static void mxs_setup_batt_detect(void)
+{
+ mxs_lradc_init();
+ mxs_lradc_enable_batt_measurement();
+ mxs_early_delay(10);
+}
+
+/**
+ * mx23_ungate_power() - Ungate the POWER block
+ *
+ * This function ungates clock to the power block. In case the power block
+ * was still gated at this point, it will not be possible to configure the
+ * block and therefore the power initialization would fail. This function
+ * is only needed on i.MX233, on i.MX28 the power block is always ungated.
+ */
+static void mx23_ungate_power(void)
+{
+ struct mxs_power_regs *power_regs =
+ (struct mxs_power_regs *)IMX_POWER_BASE;
+
+ writel(MX23_POWER_CTRL_CLKGATE, &power_regs->hw_power_ctrl_clr);
+}
+
+/**
+ * mx23_power_init() - The power block init main function
+ *
+ * This function calls all the power block initialization functions in
+ * proper sequence to start the power block.
+ */
+static void __mx23_power_init(int has_battery)
+{
+ struct mxs_power_regs *power_regs =
+ (struct mxs_power_regs *)IMX_POWER_BASE;
+
+ mx23_ungate_power();
+
+ mxs_power_clock2xtal();
+ mxs_power_set_auto_restart();
+ mxs_power_set_linreg();
+ mxs_power_setup_5v_detect();
+
+ mxs_setup_batt_detect();
+
+ mxs_src_power_init();
+
+ if (has_battery)
+ mxs_power_configure_power_source();
+ else
+ mxs_enable_battery_input();
+
+ mxs_power_clock2pll();
+
+ mxs_init_batt_bo();
+
+ mxs_switch_vddd_to_dcdc_source();
+
+ /* Fire up the VDDMEM LinReg now that we're all set. */
+ writel(POWER_VDDMEMCTRL_ENABLE_LINREG | POWER_VDDMEMCTRL_ENABLE_ILIMIT,
+ &power_regs->hw_power_vddmemctrl);
+
+ mxs_enable_output_rail_protection();
+
+ mxs_power_set_vddx(&mx23_vddio_cfg, 3300, 3150);
+ mxs_power_set_vddx(&mxs_vddd_cfg, 1500, 1000);
+ mxs_power_set_vddx(&mxs_vddd_cfg, 1350, 1200);
+ mxs_power_set_vddx(&mxs_vddmem_cfg, 2500, 1700);
+
+ writel(POWER_CTRL_VDDD_BO_IRQ | POWER_CTRL_VDDA_BO_IRQ |
+ POWER_CTRL_VDDIO_BO_IRQ | POWER_CTRL_VDD5V_DROOP_IRQ |
+ POWER_CTRL_VBUS_VALID_IRQ | POWER_CTRL_BATT_BO_IRQ |
+ POWER_CTRL_DCDC4P2_BO_IRQ, &power_regs->hw_power_ctrl_clr);
+
+ writel(POWER_5VCTRL_PWDN_5VBRNOUT, &power_regs->hw_power_5vctrl_set);
+
+ mxs_early_delay(1000);
+}
+
+void mx23_power_init(void)
+{
+ __mx23_power_init(1);
+}
+
+void mx23_power_init_battery_input(void)
+{
+ __mx23_power_init(0);
+}
+
+/**
+ * mx28_power_init() - The power block init main function
+ *
+ * This function calls all the power block initialization functions in
+ * proper sequence to start the power block.
+ */
+static void __mx28_power_init(int has_battery)
+{
+ struct mxs_power_regs *power_regs =
+ (struct mxs_power_regs *)IMX_POWER_BASE;
+
+ mxs_power_clock2xtal();
+ mxs_power_set_auto_restart();
+ mxs_power_set_linreg();
+ mxs_power_setup_5v_detect();
+
+ mxs_setup_batt_detect();
+
+ mxs_src_power_init();
+
+ if (has_battery)
+ mxs_power_configure_power_source();
+ else
+ mxs_enable_battery_input();
+
+ mxs_power_clock2pll();
+
+ mxs_init_batt_bo();
+
+ mxs_switch_vddd_to_dcdc_source();
+
+ mxs_enable_output_rail_protection();
+
+ mxs_power_set_vddx(&mx28_vddio_cfg, 3300, 3150);
+ mxs_power_set_vddx(&mxs_vddd_cfg, 1500, 1000);
+ mxs_power_set_vddx(&mxs_vddd_cfg, 1350, 1200);
+
+ writel(POWER_CTRL_VDDD_BO_IRQ | POWER_CTRL_VDDA_BO_IRQ |
+ POWER_CTRL_VDDIO_BO_IRQ | POWER_CTRL_VDD5V_DROOP_IRQ |
+ POWER_CTRL_VBUS_VALID_IRQ | POWER_CTRL_BATT_BO_IRQ |
+ POWER_CTRL_DCDC4P2_BO_IRQ, &power_regs->hw_power_ctrl_clr);
+
+ writel(POWER_5VCTRL_PWDN_5VBRNOUT, &power_regs->hw_power_5vctrl_set);
+
+ mxs_early_delay(1000);
+}
+
+void mx28_power_init(void)
+{
+ __mx28_power_init(1);
+}
+
+void mx28_power_init_battery_input(void)
+{
+ __mx28_power_init(0);
+}
+
+/**
+ * mxs_power_wait_pswitch() - Wait for power switch to be pressed
+ *
+ * This function waits until the power-switch was pressed to start booting
+ * the board.
+ */
+void mxs_power_wait_pswitch(void)
+{
+ struct mxs_power_regs *power_regs =
+ (struct mxs_power_regs *)IMX_POWER_BASE;
+
+ while (!(readl(&power_regs->hw_power_sts) & POWER_STS_PSWITCH_MASK))
+ ;
+}
--
2.1.3
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
