Hi All,
We have a December Release.
Not much new stuff has happened, but quite many fixes went into this
release, which I think is good. For new stuff we have a rtl8169 PCI
network driver and XZ image compression support.
Top developer for this release is not me but Lucas. Congratulations :)
Sascha
----------------------------------------------------------------
Alexander Shiyan (1):
serial: ns16550: Remove unused fields from NS16550_plat structure
Antony Pavlov (7):
clock.c: fix whitespaces
mips: qemu-malta: add little-endian mode support
Documentation: mips: add little-endian qemu-malta HOWTO
add .mailmap for proper git-shortlog output
Update .mailmap using scripts/mailmapper
Typoes: "whith" -> "with"
Makefile: fix typos
Bo Shen (1):
ARM: atmel: add sama5d4 xplained ultra board support
Dmitry Voytik (1):
ARM: imx23-olinuxino: discover usb before ifup
Jan Luebbe (1):
sandbox: avoid symbol conflict for fstat
Jan Weitzel (4):
net: cpsw: Allow gigabit connection
net: micrel: Add ksz8081 support
xymodem: select CRC16 from lib
mtd: ubi: get_bad_peb_limit from mtd master
Lucas Stach (79):
MIPS: malta: fix pci IO resource assignment
pci: split out device init
pci: add resource enum
pci: properly populate prefetchable BARs
pci: setup bridges and traverse buses behind them
pci: defer device registration until after bridge setup
pci: prettyprint device names
pci: track parent<->child relationship
commands: lspci: go down into subordinate busses
clk: tegra: add PLLE setup functions
clk: tegra30: add PCIe clocks
i2c: tegra: move to fs initcall
ARM: tegra: beaver: enable PEX voltage rail
tegra: pmc: add powerdomain handling
of: import pci range parser from linux
pci: add Tegra host controller driver
ARM: tegra: advertise PCI support
net: add rtl8169 driver
ARM: tegra: enable network related options in defconfig
arm: boards: variscite-mx6: check i2c return value
net: rtl8169: add support for RTL-8168/8111g
net: rtl8169: clean receive buffer after net handler
tegra: pmc: work around power domain failure
tegra: jetson-tk1: enable 1.05V_RUN
clk: tegra124: add PLLE setup functions
clk: tegra124: add PCIe clocks
add generic PHY framework
pci: tegra: add tegra124 support
tegra: beaver: set hostname in board init
tegra: jetson-tk1: set hostname in board init
ARM: tegra30: add environment path to Beaver DT
ARM: tegra124: add environment path to Jetson-TK1 DT
reset_source: add thermal reset
tegra: pmc: add support for reset src detection
tegra: defconfig: enable barebox OF drivers
pinctrl: tegra: try to select "boot" state
arm: dts: jetson-tk1: switch to upstream DT
clk: tegra: slow down MSELECT to 102MHz
pinctrl: tegra: add XUSB pad controller
tegra: colibri-t20: set hostname in board init
tegra: beaver: switch to upstream Tegra30 dtsi
tegra: beaver: add stdout-path
tegra: colibri-t20: add stdout-path
tegra: tegra124: add serial alias nodes
tegra: jetson-tk1: add stdout-path
serial: ns16550: enable clock if available
serial: ns16550: add Tegra support
tegra: remove custom UART setup
clk: tegra: don't enable UART clocks by default
arm: imx53-qsrb: fix initcalls on START-R board
arm: mach-imx: fix Eukrea CPUIMX51 Kconfig string
blspec: fix incompatible pointer type warning
pci: correct BAR size calculation
pci: align bridge windows
pci: tegra: relax link-up timeout
firmware: socfpga: depend on ARCH_SOCFPGA
firmware: altera-serial: depend on SPI
firmware: altera-serial: don't try to check void return value
firmware: altera-serial: fix printf message
common: firmware: include libfile
arm: imx: select MFD_MC13XXX for all boards that need it
arm: imx: select I2C for all boards that need it in their board init
arm: imx: nand update handler depends on MTD layer
video: ipuv3: select OFDEVICE for HDMI and LVDS
mci: esdhc: add back PIO_TIMEOUT
arm: don't allow to select BUILTIN_DTB when building multiimage
arm: fill BUILTIN_DTB_NAME for boards that still use this option
common: menu needs PROCESS_ESCAPE_SEQUENCE
usb: gadget: fastboot: select BANNER
lib: decompress_xz: fix function header to match prototype
arm: imx: pca100: only try to enable USB if USB_ULPI is configured
envfs: include errno.h
net: ethoc: depend on OPENRISC
blspec: depend on, not select flexible bootargs
usb: host: only activate Efika MX ULPI workaround if ULPI is selected
usb: musb: only build musb_barebox if host is enabled
rtc: select GREGORIAN_CALENDER
arm: imx: iim/ocotp: fix link error when !CONFIG_NET
net: rtl8139: depend on MIPS
Masahiro Yamada (1):
scripts: add mailmapper, a tool to create/update mailmap file
Sascha Hauer (34):
ARM: nitrogen6x: whitespace cleanup
ARM: nitrogen6x: update 1066MHz 4x128M16 timing from U-Boot
ARM: nitrogen6x: Fix Duallite RAM Timing
ARM: nitrogen6x: Add support for 2GB board variants
ARM: nitrogen6x: remove clock gate manipulation from DCD
led: trigger: use max_value to turn on led instead of hardcoded '1'
led: trigger: Turn of flashing leds only once
fs: store pointer to fsdev instead of dev in struct filep
fs: do not lookup global FILE * when the file is already available
fs: Store the path in struct filep
fs: implement fstat
param: let dev_add_param return the newly created param
libfile: add compare_file function
dts: update to v3.17-rc6
dts: update to v3.18-rc1
ARM i.MX6: mmdc: Only print calibration values of enabled phys
ARM i.MX6: mmdc: move calibration result printout to separate function
filetype: Add XZ filetype support
dts: update to v3.18-rc2
Add xz decompression support
commands: implement 'cmp' command
Merge branch 'for-next/am335x'
Merge branch 'for-next/dts'
Merge branch 'for-next/fs'
Merge branch 'for-next/imx'
Merge branch 'for-next/led'
Merge branch 'for-next/mips'
Merge branch 'for-next/misc'
Merge branch 'for-next/mxs'
Merge branch 'for-next/nitrogen6x'
Merge branch 'for-next/tegra'
Merge branch 'for-next/xz'
command: memset: Fix argument order in help text
Release v2014.12.0
Stefan Müller-Klieser (2):
boards: Add phytec-phyflex-am335x
pfla03: add to am335x_defconfig
Teresa Gámez (10):
ARM: defconfig: Enable of_display_timings in am335x_defconfig
net: cpsw: Fix probe for one port ethernet
phyCORE-AM335x: Update default enviroment
phyCORE-AM335x: Strip down device tree
ARM: dts: split phyCORE-AM335x device tree
phyCORE-AM335x: Add barebox image without SPI NOR
boards: defaultenv: Fix nand bootargs for AM335x boards.
of: Add of_device_enable_and_register functions
ARM: am335x: Add register of boot devices
ARM: am335x: phyCORE-AM335x: Create new dts for MLO
Thomas Petazzoni (1):
pci: mvebu: Fix uninitialized variable in mvebu_get_target_attr()
Uwe Kleine-König (3):
mxs: iomux-imx23/imx28: unify mode definition
mxs: iomux-imx23/imx28: add additional checks on mode
mtd: nand_orion: remove unused goto label
Wadim Egorov (5):
net: phy: micrel: Add OF conf. support for ksz9031
net: cpsw: Set phy device_node pointer in probe
arm: am33xx: Add rmii2_crs_dv mux selection in SMA2 register
phyFLEX: Select RMII2_CRS_DV on GPMC_A9 pin
ARM: dts: phyFLEX: Add SKEW clock delays to emac0 node
Zahari Doychev (1):
common: fix mbr filetype detection
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
