Am Donnerstag, den 26.06.2014, 12:04 +0200 schrieb Holger Schurig: > Hi all, > > In the Freescale i.MX6Q Reference manual they say in "8. System Boot" > near the end of "8.5.3.1 Expansion Device eFUSE configuration" that > the processor can load from SDCARD, but only up to 32 MB. > > Did any one of you succeeded in booting barebox from SDCARD, maybe > with a trampoline code? Or can the PBL do that? AFAIK U-Boot can boot > from sdcard, at least Boundary Devices have some web pages about this > (for Nitrogen/SabreLite) on their web page. Anyone already found out > how U-Boot does it? I could think about whatever U-Boot uses to load > the "real" Barebox instead :-) Um, we started barebox from SD-card on a lot of boards where the boot mode strapping allows this. Just dd the resulting *.img to an SD-card (you may skip the first 512 byte to leave your MBR in place). If you got the boot mode selection right it should just work. Regards, Lucas -- Pengutronix e.K. | Lucas Stach | Industrial Linux Solutions | http://www.pengutronix.de/ | _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
