RGMII PHY modes include delayed interface modes RGMII_ID, RGMII_TXID, and RGMII_RXID. Also check for those modes when setup RGMII mode in port serial ctrl register. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx> --- Cc: barebox@xxxxxxxxxxxxxxxxxxx --- drivers/net/orion-gbe.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/net/orion-gbe.c b/drivers/net/orion-gbe.c index 23c8346ec58f..991c8a80de31 100644 --- a/drivers/net/orion-gbe.c +++ b/drivers/net/orion-gbe.c @@ -447,7 +447,10 @@ static int port_probe(struct device_d *parent, struct port_priv *port) reg = SC1_RESERVED; reg |= DEFAULT_COL_LIMIT | COL_ON_BACKPRESS | INBAND_ANEG_BYPASS; - if (port->intf == PHY_INTERFACE_MODE_RGMII) + if (port->intf == PHY_INTERFACE_MODE_RGMII || + port->intf == PHY_INTERFACE_MODE_RGMII_ID || + port->intf == PHY_INTERFACE_MODE_RGMII_RXID || + port->intf == PHY_INTERFACE_MODE_RGMII_TXID) reg |= RGMII_ENABLE; writel(reg, port->regs + PORT_SC1); -- 2.0.0 _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
