Seems like "ls -l" is right, but "devinfo" is wrong:
barebox:/ ls -l /dev/m25p0
crw------- 67108864 /dev/m25p0
barebox:/ devinfo m25p0
Parameters:
size: 5468012149590870304
erasesize: 4096
writesize: 1
oobsize: 0
barebox:/ of_dump /soc/aips-bus@02000000/spba-bus@02000000/ecspi@02010000
ecspi@02010000 {
#address-cells = <0x1>;
#size-cells = <0x0>;
compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
reg = <0x2010000 0x4000>;
interrupts = <0x0 0x21 0x4>;
clocks = <0x2 0x72 0x2 0x72>;
clock-names = "ipg", "per";
dmas = <0x4 0x7 0x7 0x1 0x4 0x8 0x7 0x2>;
dma-names = "rx", "tx";
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <0x5>;
fsl,spi-num-chipselects = <0x3>;
cs-gpios = <0x6 0x18 0x0 0x6 0x19 0x0 0x6 0x1a 0x0>;
spiflash@0 {
#address-cells = <0x1>;
#size-cells = <0x1>;
compatible = "n25q512ax3", "m25p80";
spi-max-frequency = <0x989680>;
reg = <0x0>;
};
};
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
