This series adds support for specifying ethernet phys in the
devicetree and to connect them with ethernet devices. We already
have beginning support for that used in the orion-gbe driver.
This series has the advantage that the devicetree handling is
completely transparent to the ethernet driver as long as it
fills in the device_nodes of the devices correctly. Also support
for limiting the speed in devicetree is added. This is useful
for boards which have gigabit controllers and gigabit phys but
only 100MBit magnetics.
Sascha
----------------------------------------------------------------
Sascha Hauer (10):
net: phy: factor out phy_device_attach function
net: phy: move setting of phy_map to phy_register_device
net: phy: register phys specified in devicetree
net: phy: Support finding a phy in the devicetree
net: phy: Support limiting phy speed in the devicetree
net: orion-gbe: use transparent-to-driver of mdio functions
net: phy: remove now unused of_phy_device_connect
net: phy: genphy: always write MII_CTRL1000 when available
net: phy: genphy: Make it work with of_set_phy_supported
net: fec_imx: Add devicetree support for mdio bus
drivers/net/fec_imx.c | 5 ++
drivers/net/orion-gbe.c | 62 +++++++++-------
drivers/net/phy/mdio-mvebu.c | 1 +
drivers/net/phy/mdio_bus.c | 107 ++++++++++++++++++++++++++-
drivers/net/phy/phy.c | 169 ++++++++++++++++++++++++-------------------
include/linux/phy.h | 36 ++++-----
6 files changed, 253 insertions(+), 127 deletions(-)
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
