On Fri, 4 Apr 2014 18:52:46 +0200
Michel Stam <michel@xxxxxxxxxxx> wrote:
> Hello Antony,
>
> Sorry to hear that- the patch was not meant to add new functionality, merely preserve the status quo in master.
Quite the contrary!
Your patchseries introduces new functionality, it adds additional io space.
In barebox maillist all new functionality patches are assumed to be 'next' branch patches.
Only critical bugfixes and trivial changes can go to the 'master' branch directly.
> To explain; add_ns16550_device() assumes that all ns16550 chips are mapped into memory. This is not so on the x86 platform. Previously, because no io-mapped resources were available, x86 created a "memory" device with custom IO routines. I rewrote this to use IORESOURCE_IO instead, but to do this, the invocation of the add_ns16550_device() needed to specify the resource type. The patch which conflicts with your patch can be undone as far as I'm concerned; I wasn't adding anything new to the mips/mach-xburst platform. I can redo the patch, leaving the file targeted by your patch unchanged if you like?
IMHO you have to rebase your patches over the 'next' branch.
Also please use scripts/checkpatch.pl programm before sending patches to the maillist.
>
> > On 4 apr. 2014, at 17:56, Antony Pavlov <antonynpavlov@xxxxxxxxx> wrote:
> >
> > On Fri, 4 Apr 2014 15:41:39 +0200
> > michel@xxxxxxxxxxx wrote:
> >
> >> From: Michel Stam <m.stam@xxxxxxxx>
> >>
> >> The current implementation fakes a memory-mapped I/O device
> >> at 0x3f8 and 0x2f8, then uses platform read/write functions
> >> to do the actual reading and writing. These platform functions
> >> only exist for the x86 platform; better to move the I/O
> >> routines into the driver and have the driver request I/O ports
> >> using request_ioport_region.
> >> ---
> >> arch/arm/boards/eukrea_cpuimx27/eukrea_cpuimx27.c | 2 +-
> >> arch/arm/mach-mvebu/armada-370-xp.c | 3 +-
> >> arch/arm/mach-mvebu/kirkwood.c | 3 +-
> >> arch/arm/mach-socfpga/xload.c | 4 +-
> >> arch/arm/mach-tegra/tegra20.c | 2 +-
> >> arch/mips/boards/dlink-dir-320/serial.c | 2 +-
> >> arch/mips/boards/loongson-ls1b/serial.c | 2 +-
> >> arch/mips/mach-ar231x/ar231x.c | 2 +-
> >> arch/mips/mach-xburst/serial.c | 60 ++++++++++
> > hmmm
> > this partly revert my recent commit in the 'next' branch:
> >
> > commit 8f5d37835d44d07460d92307f0b6489048a18fba
> > Author: Antony Pavlov <antonynpavlov@xxxxxxxxx>
> > Date: Tue Mar 25 20:50:58 2014 +0400
> >
> > MIPS: mach-xburst: drop serial.c
> >
> > We use dts for serial port initialization,
> > so we have no need in mach-xburst/serial.c anymore.
> >
> > Signed-off-by: Antony Pavlov <antonynpavlov@xxxxxxxxx>
> > Signed-off-by: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
> >
> > arch/mips/mach-xburst/Makefile | 1 -
> > arch/mips/mach-xburst/serial.c | 60 -----------------------------------------------------
> > 2 files changed, 61 deletions(-)
> >
> >> arch/openrisc/boards/generic/generic.c | 2 +-
> >> arch/ppc/boards/freescale-p1022ds/p1022ds.c | 2 +-
> >> arch/ppc/boards/freescale-p2020rdb/p2020rdb.c | 3 +-
> >> arch/ppc/boards/geip-da923rc/da923rc.c | 3 +-
> >> arch/x86/boards/x86_generic/generic_pc.c | 5 +-
> >> arch/x86/mach-i386/Makefile | 1 -
> >> arch/x86/mach-i386/generic.c | 34 ------
> >> drivers/serial/serial_ns16550.c | 122 ++++++++++++++++++---
> >> include/driver.h | 2 +-
> >> include/ns16550.h | 11 +--
> >> 19 files changed, 187 insertions(+), 78 deletions(-)
> >> create mode 100644 arch/mips/mach-xburst/serial.c
> >> delete mode 100644 arch/x86/mach-i386/generic.c
> >>
> >> diff --git a/arch/arm/boards/eukrea_cpuimx27/eukrea_cpuimx27.c b/arch/arm/boards/eukrea_cpuimx27/eukrea_cpuimx27.c
> >> index e2ad1c8..69967c5 100644
> >> --- a/arch/arm/boards/eukrea_cpuimx27/eukrea_cpuimx27.c
> >> +++ b/arch/arm/boards/eukrea_cpuimx27/eukrea_cpuimx27.c
> >> @@ -223,7 +223,7 @@ static int eukrea_cpuimx27_console_init(void)
> >> imx27_setup_weimcs(3, 0x0000D603, 0x0D1D0D01, 0x00D20000);
> >> #ifdef CONFIG_DRIVER_SERIAL_NS16550
> >> add_ns16550_device(DEVICE_ID_DYNAMIC, MX27_CS3_BASE_ADDR + QUART_OFFSET, 0xf,
> >> - IORESOURCE_MEM_16BIT, &quad_uart_serial_plat);
> >> + IORESOURCE_MEM | IORESOURCE_MEM_16BIT, &quad_uart_serial_plat);
> >> #endif
> >> return 0;
> >> }
> >> diff --git a/arch/arm/mach-mvebu/armada-370-xp.c b/arch/arm/mach-mvebu/armada-370-xp.c
> >> index 776b4c0..209be0b 100644
> >> --- a/arch/arm/mach-mvebu/armada-370-xp.c
> >> +++ b/arch/arm/mach-mvebu/armada-370-xp.c
> >> @@ -60,7 +60,8 @@ static int armada_370_xp_add_uart(void)
> >> uart_plat.clock = clk_get_rate(tclk);
> >> if (!add_ns16550_device(DEVICE_ID_DYNAMIC,
> >> (unsigned int)CONSOLE_UART_BASE, 32,
> >> - IORESOURCE_MEM_32BIT, &uart_plat))
> >> + IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
> >> + &uart_plat))
> >> return -ENODEV;
> >> return 0;
> >> }
> >> diff --git a/arch/arm/mach-mvebu/kirkwood.c b/arch/arm/mach-mvebu/kirkwood.c
> >> index 1284220..c79d130 100644
> >> --- a/arch/arm/mach-mvebu/kirkwood.c
> >> +++ b/arch/arm/mach-mvebu/kirkwood.c
> >> @@ -58,7 +58,8 @@ static int kirkwood_add_uart(void)
> >> uart_plat.clock = clk_get_rate(tclk);
> >> if (!add_ns16550_device(DEVICE_ID_DYNAMIC,
> >> (unsigned int)CONSOLE_UART_BASE, 32,
> >> - IORESOURCE_MEM_32BIT, &uart_plat))
> >> + IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
> >> + &uart_plat))
> >> return -ENODEV;
> >> return 0;
> >> }
> >> diff --git a/arch/arm/mach-socfpga/xload.c b/arch/arm/mach-socfpga/xload.c
> >> index 0b99db0..6586ada 100644
> >> --- a/arch/arm/mach-socfpga/xload.c
> >> +++ b/arch/arm/mach-socfpga/xload.c
> >> @@ -45,8 +45,8 @@ static void socfpga_uart_init(void)
> >> clks[uart] = clk_fixed("uart", 100000000);
> >> clkdev_add_physbase(clks[uart], CYCLONE5_UART0_ADDRESS, NULL);
> >> clkdev_add_physbase(clks[uart], CYCLONE5_UART1_ADDRESS, NULL);
> >> - add_ns16550_device(0, 0xffc02000, 1024, IORESOURCE_MEM_8BIT,
> >> - &uart_pdata);
> >> + add_ns16550_device(0, 0xffc02000, 1024, IORESOURCE_MEM |
> >> + IORESOURCE_MEM_8BIT, &uart_pdata);
> >> }
> >>
> >> static void socfpga_timer_init(void)
> >> diff --git a/arch/arm/mach-tegra/tegra20.c b/arch/arm/mach-tegra/tegra20.c
> >> index cc2d748..bdd7960 100644
> >> --- a/arch/arm/mach-tegra/tegra20.c
> >> +++ b/arch/arm/mach-tegra/tegra20.c
> >> @@ -50,7 +50,7 @@ static int tegra20_add_debug_console(void)
> >> return -ENODEV;
> >>
> >> add_ns16550_device(DEVICE_ID_DYNAMIC, base, 8 << debug_uart.shift,
> >> - IORESOURCE_MEM_8BIT, &debug_uart);
> >> + IORESOURCE_MEM | IORESOURCE_MEM_8BIT, &debug_uart);
> >>
> >> return 0;
> >> }
> >> diff --git a/arch/mips/boards/dlink-dir-320/serial.c b/arch/mips/boards/dlink-dir-320/serial.c
> >> index bddb683..eb87379 100644
> >> --- a/arch/mips/boards/dlink-dir-320/serial.c
> >> +++ b/arch/mips/boards/dlink-dir-320/serial.c
> >> @@ -36,7 +36,7 @@ static int dir320_console_init(void)
> >>
> >> /* Register the serial port */
> >> add_ns16550_device(DEVICE_ID_DYNAMIC, DEBUG_LL_UART_ADDR, 8,
> >> - IORESOURCE_MEM_8BIT, &serial_plat);
> >> + IORESOURCE_MEM | IORESOURCE_MEM_8BIT, &serial_plat);
> >>
> >> return 0;
> >> }
> >> diff --git a/arch/mips/boards/loongson-ls1b/serial.c b/arch/mips/boards/loongson-ls1b/serial.c
> >> index d8e0f7c..7159ab7 100644
> >> --- a/arch/mips/boards/loongson-ls1b/serial.c
> >> +++ b/arch/mips/boards/loongson-ls1b/serial.c
> >> @@ -15,7 +15,7 @@ static int console_init(void)
> >> barebox_set_hostname("ls1b");
> >>
> >> add_ns16550_device(DEVICE_ID_DYNAMIC, KSEG1ADDR(LS1X_UART2_BASE),
> >> - 8, IORESOURCE_MEM_8BIT, &serial_plat);
> >> + 8, IORESOURCE_MEM | IORESOURCE_MEM_8BIT, &serial_plat);
> >>
> >> return 0;
> >> }
> >> diff --git a/arch/mips/mach-ar231x/ar231x.c b/arch/mips/mach-ar231x/ar231x.c
> >> index ca912bf..06d2edb 100644
> >> --- a/arch/mips/mach-ar231x/ar231x.c
> >> +++ b/arch/mips/mach-ar231x/ar231x.c
> >> @@ -189,7 +189,7 @@ static int ar2312_console_init(void)
> >> /* Register the serial port */
> >> serial_plat.clock = ar2312_sys_frequency();
> >> add_ns16550_device(DEVICE_ID_DYNAMIC, KSEG1ADDR(AR2312_UART0),
> >> - 8 << AR2312_UART_SHIFT, IORESOURCE_MEM_8BIT, &serial_plat);
> >> + 8 << AR2312_UART_SHIFT, IORESOURCE_MEM | IORESOURCE_MEM_8BIT, &serial_plat);
> >> return 0;
> >> }
> >> console_initcall(ar2312_console_init);
> >> diff --git a/arch/mips/mach-xburst/serial.c b/arch/mips/mach-xburst/serial.c
> >> new file mode 100644
> >> index 0000000..4365d19
> >> --- /dev/null
> >> +++ b/arch/mips/mach-xburst/serial.c
> >> @@ -0,0 +1,60 @@
> >> +/*
> >> + * Copyright (C) 2013 Antony Pavlov <antonynpavlov@xxxxxxxxx>
> >> + *
> >> + * Based on the linux kernel JZ4740 serial support:
> >> + * Copyright (C) 2010, Lars-Peter Clausen <lars@xxxxxxxxxx>
> >> + *
> >> + * This file is part of barebox.
> >> + * See file CREDITS for list of people who contributed to this project.
> >> + *
> >> + * This program is free software; you can redistribute it and/or modify
> >> + * it under the terms of the GNU General Public License version 2
> >> + * as published by the Free Software Foundation.
> >> + *
> >> + * This program is distributed in the hope that it will be useful,
> >> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> >> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> >> + * GNU General Public License for more details.
> >> + *
> >> + */
> >> +
> >> +#include <common.h>
> >> +#include <ns16550.h>
> >> +#include <io.h>
> >> +#include <mach/devices.h>
> >> +
> >> +#define JZ_UART_SHIFT 2
> >> +
> >> +#define ier (1 << JZ_UART_SHIFT)
> >> +#define fcr (2 << JZ_UART_SHIFT)
> >> +
> >> +static void jz_serial_reg_write(unsigned int val, unsigned long base,
> >> + unsigned char reg_offset)
> >> +{
> >> + switch (reg_offset) {
> >> + case fcr:
> >> + val |= 0x10; /* Enable uart module */
> >> + break;
> >> + case ier:
> >> + val |= (val & 0x4) << 2;
> >> + break;
> >> + default:
> >> + break;
> >> + }
> >> +
> >> + writeb(val & 0xff, (void *)(base + reg_offset));
> >> +}
> >> +
> >> +struct device_d *jz_add_uart(int id, unsigned long base, unsigned int clock)
> >> +{
> >> + struct NS16550_plat *serial_plat;
> >> +
> >> + serial_plat = xzalloc(sizeof(*serial_plat));
> >> +
> >> + serial_plat->shift = JZ_UART_SHIFT;
> >> + serial_plat->reg_write = &jz_serial_reg_write;
> >> + serial_plat->clock = clock;
> >> +
> >> + return add_ns16550_device(id, base, 8 << JZ_UART_SHIFT,
> >> + IORESOURCE_MEM | IORESOURCE_MEM_8BIT, serial_plat);
> >> +}
> >> diff --git a/arch/openrisc/boards/generic/generic.c b/arch/openrisc/boards/generic/generic.c
> >> index 290e05c..1d6ac8a 100644
> >> --- a/arch/openrisc/boards/generic/generic.c
> >> +++ b/arch/openrisc/boards/generic/generic.c
> >> @@ -15,7 +15,7 @@ static int openrisc_console_init(void)
> >> barebox_set_hostname("or1k");
> >>
> >> /* Register the serial port */
> >> - add_ns16550_device(DEVICE_ID_DYNAMIC, OPENRISC_SOPC_UART_BASE, 1024, IORESOURCE_MEM_8BIT, &serial_plat);
> >> + add_ns16550_device(DEVICE_ID_DYNAMIC, OPENRISC_SOPC_UART_BASE, 1024, IORESOURCE_MEM | IORESOURCE_MEM_8BIT, &serial_plat);
> >>
> >> #ifdef CONFIG_DRIVER_NET_ETHOC
> >> add_generic_device("ethoc", DEVICE_ID_DYNAMIC, NULL,
> >> diff --git a/arch/ppc/boards/freescale-p1022ds/p1022ds.c b/arch/ppc/boards/freescale-p1022ds/p1022ds.c
> >> index c800064..57e7953 100644
> >> --- a/arch/ppc/boards/freescale-p1022ds/p1022ds.c
> >> +++ b/arch/ppc/boards/freescale-p1022ds/p1022ds.c
> >> @@ -130,7 +130,7 @@ static int p1022ds_console_init(void)
> >>
> >> serial_plat.clock = fsl_get_bus_freq(0);
> >> add_ns16550_device(DEVICE_ID_DYNAMIC, CFG_IMMR + 0x4500, 16,
> >> - IORESOURCE_MEM_8BIT, &serial_plat);
> >> + IORESOURCE_MEM | IORESOURCE_MEM_8BIT, &serial_plat);
> >> return 0;
> >> }
> >>
> >> diff --git a/arch/ppc/boards/freescale-p2020rdb/p2020rdb.c b/arch/ppc/boards/freescale-p2020rdb/p2020rdb.c
> >> index 229ae41..385a436 100644
> >> --- a/arch/ppc/boards/freescale-p2020rdb/p2020rdb.c
> >> +++ b/arch/ppc/boards/freescale-p2020rdb/p2020rdb.c
> >> @@ -112,7 +112,8 @@ static int p2020_console_init(void)
> >>
> >> serial_plat.clock = fsl_get_bus_freq(0);
> >>
> >> - add_ns16550_device(DEVICE_ID_DYNAMIC, 0xffe04500, 16, IORESOURCE_MEM_8BIT,
> >> + add_ns16550_device(DEVICE_ID_DYNAMIC, 0xffe04500, 16,
> >> + IORESOURCE_MEM | IORESOURCE_MEM_8BIT,
> >> &serial_plat);
> >> return 0;
> >> }
> >> diff --git a/arch/ppc/boards/geip-da923rc/da923rc.c b/arch/ppc/boards/geip-da923rc/da923rc.c
> >> index 976aa8d..3d77349 100644
> >> --- a/arch/ppc/boards/geip-da923rc/da923rc.c
> >> +++ b/arch/ppc/boards/geip-da923rc/da923rc.c
> >> @@ -115,7 +115,8 @@ static int da923rc_console_init(void)
> >> barebox_set_model("unknown");
> >>
> >> serial_plat.clock = fsl_get_bus_freq(0);
> >> - add_ns16550_device(1, CFG_CCSRBAR + 0x4600, 16, IORESOURCE_MEM_8BIT,
> >> + add_ns16550_device(1, CFG_CCSRBAR + 0x4600, 16,
> >> + IORESOURCE_MEM | IORESOURCE_MEM_8BIT,
> >> &serial_plat);
> >> return 0;
> >> }
> >> diff --git a/arch/x86/boards/x86_generic/generic_pc.c b/arch/x86/boards/x86_generic/generic_pc.c
> >> index 895b88d..69c6f58 100644
> >> --- a/arch/x86/boards/x86_generic/generic_pc.c
> >> +++ b/arch/x86/boards/x86_generic/generic_pc.c
> >> @@ -141,8 +141,6 @@ device_initcall(devices_init);
> >>
> >> static struct NS16550_plat serial_plat = {
> >> .clock = 1843200,
> >> - .reg_read = x86_uart_read,
> >> - .reg_write = x86_uart_write,
> >> };
> >>
> >> static int pc_console_init(void)
> >> @@ -151,7 +149,8 @@ static int pc_console_init(void)
> >> barebox_set_hostname("x86");
> >>
> >> /* Register the serial port */
> >> - add_ns16550_device(DEVICE_ID_DYNAMIC, 0x3f8, 8, 0, &serial_plat);
> >> + add_ns16550_device(DEVICE_ID_DYNAMIC, 0x3f8, 8, IORESOURCE_IO, &serial_plat);
> >> + add_ns16550_device(DEVICE_ID_DYNAMIC, 0x2f8, 8, IORESOURCE_IO, &serial_plat);
> >>
> >> return 0;
> >> }
> >> diff --git a/arch/x86/mach-i386/Makefile b/arch/x86/mach-i386/Makefile
> >> index 10712e6..e46aa5b 100644
> >> --- a/arch/x86/mach-i386/Makefile
> >> +++ b/arch/x86/mach-i386/Makefile
> >> @@ -1,4 +1,3 @@
> >> -obj-y += generic.o
> >> obj-y += reset.o
> >>
> >> # reference clocksource
> >> diff --git a/arch/x86/mach-i386/generic.c b/arch/x86/mach-i386/generic.c
> >> deleted file mode 100644
> >> index 69cf53c..0000000
> >> --- a/arch/x86/mach-i386/generic.c
> >> +++ /dev/null
> >> @@ -1,34 +0,0 @@
> >> -/*
> >> - * Copyright (C) 2009 Juergen Beisert, Pengutronix
> >> - *
> >> - * This program is free software; you can redistribute it and/or
> >> - * modify it under the terms of the GNU General Public License as
> >> - * published by the Free Software Foundation; either version 2 of
> >> - * the License, or (at your option) any later version.
> >> - *
> >> - * This program is distributed in the hope that it will be useful,
> >> - * but WITHOUT ANY WARRANTY; without even the implied warranty of
> >> - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> >> - * GNU General Public License for more details.
> >> - *
> >> - *
> >> - */
> >> -
> >> -/**
> >> - * @file
> >> - * @brief x86 Architecture Initialization routines
> >> - */
> >> -
> >> -#include <io.h>
> >> -
> >> -/** to work with the 8250 UART driver implementation we need this function */
> >> -unsigned int x86_uart_read(unsigned long base, unsigned char reg_idx)
> >> -{
> >> - return inb(base + reg_idx);
> >> -}
> >> -
> >> -/** to work with the 8250 UART driver implementation we need this function */
> >> -void x86_uart_write(unsigned int val, unsigned long base, unsigned char reg_idx)
> >> -{
> >> - outb(val, base + reg_idx);
> >> -}
> >> diff --git a/drivers/serial/serial_ns16550.c b/drivers/serial/serial_ns16550.c
> >> index 0c00eb1..dfe572d 100644
> >> --- a/drivers/serial/serial_ns16550.c
> >> +++ b/drivers/serial/serial_ns16550.c
> >> @@ -47,6 +47,7 @@ struct ns16550_priv {
> >> struct console_device cdev;
> >> struct NS16550_plat plat;
> >> int access_width;
> >> + int mmio;
> >> struct clk *clk;
> >> uint32_t fcrval;
> >> };
> >> @@ -62,6 +63,87 @@ struct ns16550_drvdata {
> >> };
> >>
> >> /**
> >> + * @brief read system i/o (byte)
> >> + * @param[in] addr address to read
> >> + * @param[in] mmio memory i/o space or i/o port space
> >> + */
> >> +static inline uint8_t ns16550_sys_readb(void __iomem *addr, int mmio)
> >> +{
> >> + if (mmio)
> >> + return readb(addr);
> >> + else
> >> + return (uint8_t) inb((int) addr);
> >> +}
> >> +
> >> +/**
> >> + * @brief read system i/o (word)
> >> + * @param[in] addr address to read
> >> + * @param[in] mmio memory i/o space or i/o port space
> >> + */
> >> +static inline uint16_t ns16550_sys_readw(void __iomem *addr, int mmio)
> >> +{
> >> + if (mmio)
> >> + return readw(addr);
> >> + else
> >> + return (uint16_t) inw((int) addr);
> >> +}
> >> +
> >> +/**
> >> + * @brief read system i/o (dword)
> >> + * @param[in] addr address to read
> >> + * @param[in] mmio memory i/o space or i/o port space
> >> + */
> >> +static inline uint32_t ns16550_sys_readl(void __iomem *addr, int mmio)
> >> +{
> >> + if (mmio)
> >> + return readl(addr);
> >> + else
> >> + return (uint32_t) inl((int) addr);
> >> +}
> >> +
> >> +/**
> >> + * @brief write system i/o (byte)
> >> + * @param[in] val data to write
> >> + * @param[in] addr address to write to
> >> + * @param[in] mmio memory i/o space or i/o port space
> >> + */
> >> +static inline void ns16550_sys_writeb(uint8_t val, void __iomem *addr, int mmio)
> >> +{
> >> + if (mmio)
> >> + writeb(val, addr);
> >> + else
> >> + outb(val, (int) addr);
> >> +}
> >> +
> >> +/**
> >> + * @brief read system i/o (word)
> >> + * @param[in] val data to write
> >> + * @param[in] addr address to write to
> >> + * @param[in] mmio memory i/o space or i/o port space
> >> + */
> >> +static inline void ns16550_sys_writew(uint16_t val, void __iomem *addr, int mmio)
> >> +{
> >> + if (mmio)
> >> + writew(val, addr);
> >> + else
> >> + outw(val, (int) addr);
> >> +}
> >> +
> >> +/**
> >> + * @brief read system i/o (dword)
> >> + * @param[in] val data to write
> >> + * @param[in] addr address to write to
> >> + * @param[in] mmio memory i/o space or i/o port space
> >> + */
> >> +static inline void ns16550_sys_writel(uint32_t val, void __iomem *addr, int mmio)
> >> +{
> >> + if (mmio)
> >> + writel(val, addr);
> >> + else
> >> + outl(val, (int) addr);
> >> +}
> >> +
> >> +/**
> >> * @brief read register
> >> *
> >> * @param[in] cdev pointer to console device
> >> @@ -78,16 +160,13 @@ static uint32_t ns16550_read(struct console_device *cdev, uint32_t off)
> >>
> >> off <<= plat->shift;
> >>
> >> - if (plat->reg_read)
> >> - return plat->reg_read((unsigned long)dev->priv, off);
> >> -
> >> switch (width) {
> >> case IORESOURCE_MEM_8BIT:
> >> - return readb(dev->priv + off);
> >> + return ns16550_sys_readb(dev->priv + off, priv->mmio);
> >> case IORESOURCE_MEM_16BIT:
> >> - return readw(dev->priv + off);
> >> + return ns16550_sys_readw(dev->priv + off, priv->mmio);
> >> case IORESOURCE_MEM_32BIT:
> >> - return readl(dev->priv + off);
> >> + return ns16550_sys_readl(dev->priv + off, priv->mmio);
> >> }
> >> return -1;
> >> }
> >> @@ -109,20 +188,15 @@ static void ns16550_write(struct console_device *cdev, uint32_t val,
> >>
> >> off <<= plat->shift;
> >>
> >> - if (plat->reg_write) {
> >> - plat->reg_write(val, (unsigned long)dev->priv, off);
> >> - return;
> >> - }
> >> -
> >> switch (width) {
> >> case IORESOURCE_MEM_8BIT:
> >> - writeb(val & 0xff, dev->priv + off);
> >> + ns16550_sys_writeb(val & 0xff, dev->priv + off, priv->mmio);
> >> break;
> >> case IORESOURCE_MEM_16BIT:
> >> - writew(val & 0xffff, dev->priv + off);
> >> + ns16550_sys_writew(val & 0xffff, dev->priv + off, priv->mmio);
> >> break;
> >> case IORESOURCE_MEM_32BIT:
> >> - writel(val, dev->priv + off);
> >> + ns16550_sys_writel(val, dev->priv + off, priv->mmio);
> >> break;
> >> }
> >> }
> >> @@ -293,16 +367,32 @@ static int ns16550_probe(struct device_d *dev)
> >> struct console_device *cdev;
> >> struct NS16550_plat *plat = (struct NS16550_plat *)dev->platform_data;
> >> struct ns16550_drvdata *devtype;
> >> + struct resource *res;
> >> int ret;
> >>
> >> ret = dev_get_drvdata(dev, (unsigned long *)&devtype);
> >> if (ret)
> >> devtype = &ns16550_drvdata;
> >>
> >> - dev->priv = dev_request_mem_region(dev, 0);
> >> -
> >> priv = xzalloc(sizeof(*priv));
> >>
> >> + res = dev_get_resource(dev, IORESOURCE_MEM, 0);
> >> + priv->mmio = (res != NULL);
> >> + if (res)
> >> + {
> >> + res = request_iomem_region(dev_name(dev),res->start,res->end);
> >> + }
> >> + else
> >> + {
> >
> >
> >
> > Have you checked your patches with checkpatch.pl script?
> >
> >
> >> + res = dev_get_resource(dev, IORESOURCE_IO, 0);
> >> + if (res)
> >> + res = request_ioport_region(dev_name(dev),res->start,res->end);
> >> + }
> >> + if (!res)
> >> + goto err;
> >> + dev->priv = (void __force __iomem *) res->start;
> >> +
> >> +
> >> if (plat)
> >> priv->plat = *plat;
> >> else
> >> diff --git a/include/driver.h b/include/driver.h
> >> index 37797c7..ff4a5a1 100644
> >> --- a/include/driver.h
> >> +++ b/include/driver.h
> >> @@ -276,7 +276,7 @@ static inline struct device_d *add_ns16550_device(int id, resource_size_t start,
> >> resource_size_t size, int flags, struct NS16550_plat *pdata)
> >> {
> >> return add_generic_device("ns16550_serial", id, NULL, start, size,
> >> - IORESOURCE_MEM | flags, pdata);
> >> + flags, pdata);
> >> }
> >>
> >> #ifdef CONFIG_DRIVER_NET_DM9K
> >> diff --git a/include/ns16550.h b/include/ns16550.h
> >> index 36aa5ff..876bb04 100644
> >> --- a/include/ns16550.h
> >> +++ b/include/ns16550.h
> >> @@ -33,18 +33,9 @@
> >> struct NS16550_plat {
> >> /** Clock speed */
> >> unsigned int clock;
> >> - /**
> >> - * register read access capability
> >> - */
> >> - unsigned int (*reg_read) (unsigned long base, unsigned char reg_offset);
> >> - /**
> >> - * register write access capability
> >> - */
> >> - void (*reg_write) (unsigned int val, unsigned long base,
> >> - unsigned char reg_offset);
> >> -
> >> int shift;
> >> unsigned int flags;
> >> + int mmio;
> >
> > Do you really need this 'int mmio' here?
> >
> >> #define NS16650_FLAG_DISABLE_FIFO 1
> >> };
> >>
> >> --
> >> 1.7.1
> >>
> >>
> >> _______________________________________________
> >> barebox mailing list
> >> barebox@xxxxxxxxxxxxxxxxxxx
> >> http://lists.infradead.org/mailman/listinfo/barebox
> >
> >
> > --
> > --
> > Best regards,
> > Antony Pavlov
--
--
Best regards,
Antony Pavlov
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
