On Fri, 4 Apr 2014 15:41:39 +0200
michel@xxxxxxxxxxx wrote:
> From: Michel Stam <m.stam@xxxxxxxx>
>
> The current implementation fakes a memory-mapped I/O device
> at 0x3f8 and 0x2f8, then uses platform read/write functions
> to do the actual reading and writing. These platform functions
> only exist for the x86 platform; better to move the I/O
> routines into the driver and have the driver request I/O ports
> using request_ioport_region.
> ---
> arch/arm/boards/eukrea_cpuimx27/eukrea_cpuimx27.c | 2 +-
> arch/arm/mach-mvebu/armada-370-xp.c | 3 +-
> arch/arm/mach-mvebu/kirkwood.c | 3 +-
> arch/arm/mach-socfpga/xload.c | 4 +-
> arch/arm/mach-tegra/tegra20.c | 2 +-
> arch/mips/boards/dlink-dir-320/serial.c | 2 +-
> arch/mips/boards/loongson-ls1b/serial.c | 2 +-
> arch/mips/mach-ar231x/ar231x.c | 2 +-
> arch/mips/mach-xburst/serial.c | 60 ++++++++++
hmmm
this partly revert my recent commit in the 'next' branch:
commit 8f5d37835d44d07460d92307f0b6489048a18fba
Author: Antony Pavlov <antonynpavlov@xxxxxxxxx>
Date: Tue Mar 25 20:50:58 2014 +0400
MIPS: mach-xburst: drop serial.c
We use dts for serial port initialization,
so we have no need in mach-xburst/serial.c anymore.
Signed-off-by: Antony Pavlov <antonynpavlov@xxxxxxxxx>
Signed-off-by: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
arch/mips/mach-xburst/Makefile | 1 -
arch/mips/mach-xburst/serial.c | 60 -----------------------------------------------------
2 files changed, 61 deletions(-)
> arch/openrisc/boards/generic/generic.c | 2 +-
> arch/ppc/boards/freescale-p1022ds/p1022ds.c | 2 +-
> arch/ppc/boards/freescale-p2020rdb/p2020rdb.c | 3 +-
> arch/ppc/boards/geip-da923rc/da923rc.c | 3 +-
> arch/x86/boards/x86_generic/generic_pc.c | 5 +-
> arch/x86/mach-i386/Makefile | 1 -
> arch/x86/mach-i386/generic.c | 34 ------
> drivers/serial/serial_ns16550.c | 122 ++++++++++++++++++---
> include/driver.h | 2 +-
> include/ns16550.h | 11 +--
> 19 files changed, 187 insertions(+), 78 deletions(-)
> create mode 100644 arch/mips/mach-xburst/serial.c
> delete mode 100644 arch/x86/mach-i386/generic.c
>
> diff --git a/arch/arm/boards/eukrea_cpuimx27/eukrea_cpuimx27.c b/arch/arm/boards/eukrea_cpuimx27/eukrea_cpuimx27.c
> index e2ad1c8..69967c5 100644
> --- a/arch/arm/boards/eukrea_cpuimx27/eukrea_cpuimx27.c
> +++ b/arch/arm/boards/eukrea_cpuimx27/eukrea_cpuimx27.c
> @@ -223,7 +223,7 @@ static int eukrea_cpuimx27_console_init(void)
> imx27_setup_weimcs(3, 0x0000D603, 0x0D1D0D01, 0x00D20000);
> #ifdef CONFIG_DRIVER_SERIAL_NS16550
> add_ns16550_device(DEVICE_ID_DYNAMIC, MX27_CS3_BASE_ADDR + QUART_OFFSET, 0xf,
> - IORESOURCE_MEM_16BIT, &quad_uart_serial_plat);
> + IORESOURCE_MEM | IORESOURCE_MEM_16BIT, &quad_uart_serial_plat);
> #endif
> return 0;
> }
> diff --git a/arch/arm/mach-mvebu/armada-370-xp.c b/arch/arm/mach-mvebu/armada-370-xp.c
> index 776b4c0..209be0b 100644
> --- a/arch/arm/mach-mvebu/armada-370-xp.c
> +++ b/arch/arm/mach-mvebu/armada-370-xp.c
> @@ -60,7 +60,8 @@ static int armada_370_xp_add_uart(void)
> uart_plat.clock = clk_get_rate(tclk);
> if (!add_ns16550_device(DEVICE_ID_DYNAMIC,
> (unsigned int)CONSOLE_UART_BASE, 32,
> - IORESOURCE_MEM_32BIT, &uart_plat))
> + IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
> + &uart_plat))
> return -ENODEV;
> return 0;
> }
> diff --git a/arch/arm/mach-mvebu/kirkwood.c b/arch/arm/mach-mvebu/kirkwood.c
> index 1284220..c79d130 100644
> --- a/arch/arm/mach-mvebu/kirkwood.c
> +++ b/arch/arm/mach-mvebu/kirkwood.c
> @@ -58,7 +58,8 @@ static int kirkwood_add_uart(void)
> uart_plat.clock = clk_get_rate(tclk);
> if (!add_ns16550_device(DEVICE_ID_DYNAMIC,
> (unsigned int)CONSOLE_UART_BASE, 32,
> - IORESOURCE_MEM_32BIT, &uart_plat))
> + IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
> + &uart_plat))
> return -ENODEV;
> return 0;
> }
> diff --git a/arch/arm/mach-socfpga/xload.c b/arch/arm/mach-socfpga/xload.c
> index 0b99db0..6586ada 100644
> --- a/arch/arm/mach-socfpga/xload.c
> +++ b/arch/arm/mach-socfpga/xload.c
> @@ -45,8 +45,8 @@ static void socfpga_uart_init(void)
> clks[uart] = clk_fixed("uart", 100000000);
> clkdev_add_physbase(clks[uart], CYCLONE5_UART0_ADDRESS, NULL);
> clkdev_add_physbase(clks[uart], CYCLONE5_UART1_ADDRESS, NULL);
> - add_ns16550_device(0, 0xffc02000, 1024, IORESOURCE_MEM_8BIT,
> - &uart_pdata);
> + add_ns16550_device(0, 0xffc02000, 1024, IORESOURCE_MEM |
> + IORESOURCE_MEM_8BIT, &uart_pdata);
> }
>
> static void socfpga_timer_init(void)
> diff --git a/arch/arm/mach-tegra/tegra20.c b/arch/arm/mach-tegra/tegra20.c
> index cc2d748..bdd7960 100644
> --- a/arch/arm/mach-tegra/tegra20.c
> +++ b/arch/arm/mach-tegra/tegra20.c
> @@ -50,7 +50,7 @@ static int tegra20_add_debug_console(void)
> return -ENODEV;
>
> add_ns16550_device(DEVICE_ID_DYNAMIC, base, 8 << debug_uart.shift,
> - IORESOURCE_MEM_8BIT, &debug_uart);
> + IORESOURCE_MEM | IORESOURCE_MEM_8BIT, &debug_uart);
>
> return 0;
> }
> diff --git a/arch/mips/boards/dlink-dir-320/serial.c b/arch/mips/boards/dlink-dir-320/serial.c
> index bddb683..eb87379 100644
> --- a/arch/mips/boards/dlink-dir-320/serial.c
> +++ b/arch/mips/boards/dlink-dir-320/serial.c
> @@ -36,7 +36,7 @@ static int dir320_console_init(void)
>
> /* Register the serial port */
> add_ns16550_device(DEVICE_ID_DYNAMIC, DEBUG_LL_UART_ADDR, 8,
> - IORESOURCE_MEM_8BIT, &serial_plat);
> + IORESOURCE_MEM | IORESOURCE_MEM_8BIT, &serial_plat);
>
> return 0;
> }
> diff --git a/arch/mips/boards/loongson-ls1b/serial.c b/arch/mips/boards/loongson-ls1b/serial.c
> index d8e0f7c..7159ab7 100644
> --- a/arch/mips/boards/loongson-ls1b/serial.c
> +++ b/arch/mips/boards/loongson-ls1b/serial.c
> @@ -15,7 +15,7 @@ static int console_init(void)
> barebox_set_hostname("ls1b");
>
> add_ns16550_device(DEVICE_ID_DYNAMIC, KSEG1ADDR(LS1X_UART2_BASE),
> - 8, IORESOURCE_MEM_8BIT, &serial_plat);
> + 8, IORESOURCE_MEM | IORESOURCE_MEM_8BIT, &serial_plat);
>
> return 0;
> }
> diff --git a/arch/mips/mach-ar231x/ar231x.c b/arch/mips/mach-ar231x/ar231x.c
> index ca912bf..06d2edb 100644
> --- a/arch/mips/mach-ar231x/ar231x.c
> +++ b/arch/mips/mach-ar231x/ar231x.c
> @@ -189,7 +189,7 @@ static int ar2312_console_init(void)
> /* Register the serial port */
> serial_plat.clock = ar2312_sys_frequency();
> add_ns16550_device(DEVICE_ID_DYNAMIC, KSEG1ADDR(AR2312_UART0),
> - 8 << AR2312_UART_SHIFT, IORESOURCE_MEM_8BIT, &serial_plat);
> + 8 << AR2312_UART_SHIFT, IORESOURCE_MEM | IORESOURCE_MEM_8BIT, &serial_plat);
> return 0;
> }
> console_initcall(ar2312_console_init);
> diff --git a/arch/mips/mach-xburst/serial.c b/arch/mips/mach-xburst/serial.c
> new file mode 100644
> index 0000000..4365d19
> --- /dev/null
> +++ b/arch/mips/mach-xburst/serial.c
> @@ -0,0 +1,60 @@
> +/*
> + * Copyright (C) 2013 Antony Pavlov <antonynpavlov@xxxxxxxxx>
> + *
> + * Based on the linux kernel JZ4740 serial support:
> + * Copyright (C) 2010, Lars-Peter Clausen <lars@xxxxxxxxxx>
> + *
> + * This file is part of barebox.
> + * See file CREDITS for list of people who contributed to this project.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2
> + * as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + */
> +
> +#include <common.h>
> +#include <ns16550.h>
> +#include <io.h>
> +#include <mach/devices.h>
> +
> +#define JZ_UART_SHIFT 2
> +
> +#define ier (1 << JZ_UART_SHIFT)
> +#define fcr (2 << JZ_UART_SHIFT)
> +
> +static void jz_serial_reg_write(unsigned int val, unsigned long base,
> + unsigned char reg_offset)
> +{
> + switch (reg_offset) {
> + case fcr:
> + val |= 0x10; /* Enable uart module */
> + break;
> + case ier:
> + val |= (val & 0x4) << 2;
> + break;
> + default:
> + break;
> + }
> +
> + writeb(val & 0xff, (void *)(base + reg_offset));
> +}
> +
> +struct device_d *jz_add_uart(int id, unsigned long base, unsigned int clock)
> +{
> + struct NS16550_plat *serial_plat;
> +
> + serial_plat = xzalloc(sizeof(*serial_plat));
> +
> + serial_plat->shift = JZ_UART_SHIFT;
> + serial_plat->reg_write = &jz_serial_reg_write;
> + serial_plat->clock = clock;
> +
> + return add_ns16550_device(id, base, 8 << JZ_UART_SHIFT,
> + IORESOURCE_MEM | IORESOURCE_MEM_8BIT, serial_plat);
> +}
> diff --git a/arch/openrisc/boards/generic/generic.c b/arch/openrisc/boards/generic/generic.c
> index 290e05c..1d6ac8a 100644
> --- a/arch/openrisc/boards/generic/generic.c
> +++ b/arch/openrisc/boards/generic/generic.c
> @@ -15,7 +15,7 @@ static int openrisc_console_init(void)
> barebox_set_hostname("or1k");
>
> /* Register the serial port */
> - add_ns16550_device(DEVICE_ID_DYNAMIC, OPENRISC_SOPC_UART_BASE, 1024, IORESOURCE_MEM_8BIT, &serial_plat);
> + add_ns16550_device(DEVICE_ID_DYNAMIC, OPENRISC_SOPC_UART_BASE, 1024, IORESOURCE_MEM | IORESOURCE_MEM_8BIT, &serial_plat);
>
> #ifdef CONFIG_DRIVER_NET_ETHOC
> add_generic_device("ethoc", DEVICE_ID_DYNAMIC, NULL,
> diff --git a/arch/ppc/boards/freescale-p1022ds/p1022ds.c b/arch/ppc/boards/freescale-p1022ds/p1022ds.c
> index c800064..57e7953 100644
> --- a/arch/ppc/boards/freescale-p1022ds/p1022ds.c
> +++ b/arch/ppc/boards/freescale-p1022ds/p1022ds.c
> @@ -130,7 +130,7 @@ static int p1022ds_console_init(void)
>
> serial_plat.clock = fsl_get_bus_freq(0);
> add_ns16550_device(DEVICE_ID_DYNAMIC, CFG_IMMR + 0x4500, 16,
> - IORESOURCE_MEM_8BIT, &serial_plat);
> + IORESOURCE_MEM | IORESOURCE_MEM_8BIT, &serial_plat);
> return 0;
> }
>
> diff --git a/arch/ppc/boards/freescale-p2020rdb/p2020rdb.c b/arch/ppc/boards/freescale-p2020rdb/p2020rdb.c
> index 229ae41..385a436 100644
> --- a/arch/ppc/boards/freescale-p2020rdb/p2020rdb.c
> +++ b/arch/ppc/boards/freescale-p2020rdb/p2020rdb.c
> @@ -112,7 +112,8 @@ static int p2020_console_init(void)
>
> serial_plat.clock = fsl_get_bus_freq(0);
>
> - add_ns16550_device(DEVICE_ID_DYNAMIC, 0xffe04500, 16, IORESOURCE_MEM_8BIT,
> + add_ns16550_device(DEVICE_ID_DYNAMIC, 0xffe04500, 16,
> + IORESOURCE_MEM | IORESOURCE_MEM_8BIT,
> &serial_plat);
> return 0;
> }
> diff --git a/arch/ppc/boards/geip-da923rc/da923rc.c b/arch/ppc/boards/geip-da923rc/da923rc.c
> index 976aa8d..3d77349 100644
> --- a/arch/ppc/boards/geip-da923rc/da923rc.c
> +++ b/arch/ppc/boards/geip-da923rc/da923rc.c
> @@ -115,7 +115,8 @@ static int da923rc_console_init(void)
> barebox_set_model("unknown");
>
> serial_plat.clock = fsl_get_bus_freq(0);
> - add_ns16550_device(1, CFG_CCSRBAR + 0x4600, 16, IORESOURCE_MEM_8BIT,
> + add_ns16550_device(1, CFG_CCSRBAR + 0x4600, 16,
> + IORESOURCE_MEM | IORESOURCE_MEM_8BIT,
> &serial_plat);
> return 0;
> }
> diff --git a/arch/x86/boards/x86_generic/generic_pc.c b/arch/x86/boards/x86_generic/generic_pc.c
> index 895b88d..69c6f58 100644
> --- a/arch/x86/boards/x86_generic/generic_pc.c
> +++ b/arch/x86/boards/x86_generic/generic_pc.c
> @@ -141,8 +141,6 @@ device_initcall(devices_init);
>
> static struct NS16550_plat serial_plat = {
> .clock = 1843200,
> - .reg_read = x86_uart_read,
> - .reg_write = x86_uart_write,
> };
>
> static int pc_console_init(void)
> @@ -151,7 +149,8 @@ static int pc_console_init(void)
> barebox_set_hostname("x86");
>
> /* Register the serial port */
> - add_ns16550_device(DEVICE_ID_DYNAMIC, 0x3f8, 8, 0, &serial_plat);
> + add_ns16550_device(DEVICE_ID_DYNAMIC, 0x3f8, 8, IORESOURCE_IO, &serial_plat);
> + add_ns16550_device(DEVICE_ID_DYNAMIC, 0x2f8, 8, IORESOURCE_IO, &serial_plat);
>
> return 0;
> }
> diff --git a/arch/x86/mach-i386/Makefile b/arch/x86/mach-i386/Makefile
> index 10712e6..e46aa5b 100644
> --- a/arch/x86/mach-i386/Makefile
> +++ b/arch/x86/mach-i386/Makefile
> @@ -1,4 +1,3 @@
> -obj-y += generic.o
> obj-y += reset.o
>
> # reference clocksource
> diff --git a/arch/x86/mach-i386/generic.c b/arch/x86/mach-i386/generic.c
> deleted file mode 100644
> index 69cf53c..0000000
> --- a/arch/x86/mach-i386/generic.c
> +++ /dev/null
> @@ -1,34 +0,0 @@
> -/*
> - * Copyright (C) 2009 Juergen Beisert, Pengutronix
> - *
> - * This program is free software; you can redistribute it and/or
> - * modify it under the terms of the GNU General Public License as
> - * published by the Free Software Foundation; either version 2 of
> - * the License, or (at your option) any later version.
> - *
> - * This program is distributed in the hope that it will be useful,
> - * but WITHOUT ANY WARRANTY; without even the implied warranty of
> - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> - * GNU General Public License for more details.
> - *
> - *
> - */
> -
> -/**
> - * @file
> - * @brief x86 Architecture Initialization routines
> - */
> -
> -#include <io.h>
> -
> -/** to work with the 8250 UART driver implementation we need this function */
> -unsigned int x86_uart_read(unsigned long base, unsigned char reg_idx)
> -{
> - return inb(base + reg_idx);
> -}
> -
> -/** to work with the 8250 UART driver implementation we need this function */
> -void x86_uart_write(unsigned int val, unsigned long base, unsigned char reg_idx)
> -{
> - outb(val, base + reg_idx);
> -}
> diff --git a/drivers/serial/serial_ns16550.c b/drivers/serial/serial_ns16550.c
> index 0c00eb1..dfe572d 100644
> --- a/drivers/serial/serial_ns16550.c
> +++ b/drivers/serial/serial_ns16550.c
> @@ -47,6 +47,7 @@ struct ns16550_priv {
> struct console_device cdev;
> struct NS16550_plat plat;
> int access_width;
> + int mmio;
> struct clk *clk;
> uint32_t fcrval;
> };
> @@ -62,6 +63,87 @@ struct ns16550_drvdata {
> };
>
> /**
> + * @brief read system i/o (byte)
> + * @param[in] addr address to read
> + * @param[in] mmio memory i/o space or i/o port space
> + */
> +static inline uint8_t ns16550_sys_readb(void __iomem *addr, int mmio)
> +{
> + if (mmio)
> + return readb(addr);
> + else
> + return (uint8_t) inb((int) addr);
> +}
> +
> +/**
> + * @brief read system i/o (word)
> + * @param[in] addr address to read
> + * @param[in] mmio memory i/o space or i/o port space
> + */
> +static inline uint16_t ns16550_sys_readw(void __iomem *addr, int mmio)
> +{
> + if (mmio)
> + return readw(addr);
> + else
> + return (uint16_t) inw((int) addr);
> +}
> +
> +/**
> + * @brief read system i/o (dword)
> + * @param[in] addr address to read
> + * @param[in] mmio memory i/o space or i/o port space
> + */
> +static inline uint32_t ns16550_sys_readl(void __iomem *addr, int mmio)
> +{
> + if (mmio)
> + return readl(addr);
> + else
> + return (uint32_t) inl((int) addr);
> +}
> +
> +/**
> + * @brief write system i/o (byte)
> + * @param[in] val data to write
> + * @param[in] addr address to write to
> + * @param[in] mmio memory i/o space or i/o port space
> + */
> +static inline void ns16550_sys_writeb(uint8_t val, void __iomem *addr, int mmio)
> +{
> + if (mmio)
> + writeb(val, addr);
> + else
> + outb(val, (int) addr);
> +}
> +
> +/**
> + * @brief read system i/o (word)
> + * @param[in] val data to write
> + * @param[in] addr address to write to
> + * @param[in] mmio memory i/o space or i/o port space
> + */
> +static inline void ns16550_sys_writew(uint16_t val, void __iomem *addr, int mmio)
> +{
> + if (mmio)
> + writew(val, addr);
> + else
> + outw(val, (int) addr);
> +}
> +
> +/**
> + * @brief read system i/o (dword)
> + * @param[in] val data to write
> + * @param[in] addr address to write to
> + * @param[in] mmio memory i/o space or i/o port space
> + */
> +static inline void ns16550_sys_writel(uint32_t val, void __iomem *addr, int mmio)
> +{
> + if (mmio)
> + writel(val, addr);
> + else
> + outl(val, (int) addr);
> +}
> +
> +/**
> * @brief read register
> *
> * @param[in] cdev pointer to console device
> @@ -78,16 +160,13 @@ static uint32_t ns16550_read(struct console_device *cdev, uint32_t off)
>
> off <<= plat->shift;
>
> - if (plat->reg_read)
> - return plat->reg_read((unsigned long)dev->priv, off);
> -
> switch (width) {
> case IORESOURCE_MEM_8BIT:
> - return readb(dev->priv + off);
> + return ns16550_sys_readb(dev->priv + off, priv->mmio);
> case IORESOURCE_MEM_16BIT:
> - return readw(dev->priv + off);
> + return ns16550_sys_readw(dev->priv + off, priv->mmio);
> case IORESOURCE_MEM_32BIT:
> - return readl(dev->priv + off);
> + return ns16550_sys_readl(dev->priv + off, priv->mmio);
> }
> return -1;
> }
> @@ -109,20 +188,15 @@ static void ns16550_write(struct console_device *cdev, uint32_t val,
>
> off <<= plat->shift;
>
> - if (plat->reg_write) {
> - plat->reg_write(val, (unsigned long)dev->priv, off);
> - return;
> - }
> -
> switch (width) {
> case IORESOURCE_MEM_8BIT:
> - writeb(val & 0xff, dev->priv + off);
> + ns16550_sys_writeb(val & 0xff, dev->priv + off, priv->mmio);
> break;
> case IORESOURCE_MEM_16BIT:
> - writew(val & 0xffff, dev->priv + off);
> + ns16550_sys_writew(val & 0xffff, dev->priv + off, priv->mmio);
> break;
> case IORESOURCE_MEM_32BIT:
> - writel(val, dev->priv + off);
> + ns16550_sys_writel(val, dev->priv + off, priv->mmio);
> break;
> }
> }
> @@ -293,16 +367,32 @@ static int ns16550_probe(struct device_d *dev)
> struct console_device *cdev;
> struct NS16550_plat *plat = (struct NS16550_plat *)dev->platform_data;
> struct ns16550_drvdata *devtype;
> + struct resource *res;
> int ret;
>
> ret = dev_get_drvdata(dev, (unsigned long *)&devtype);
> if (ret)
> devtype = &ns16550_drvdata;
>
> - dev->priv = dev_request_mem_region(dev, 0);
> -
> priv = xzalloc(sizeof(*priv));
>
> + res = dev_get_resource(dev, IORESOURCE_MEM, 0);
> + priv->mmio = (res != NULL);
> + if (res)
> + {
> + res = request_iomem_region(dev_name(dev),res->start,res->end);
> + }
> + else
> + {
Have you checked your patches with checkpatch.pl script?
> + res = dev_get_resource(dev, IORESOURCE_IO, 0);
> + if (res)
> + res = request_ioport_region(dev_name(dev),res->start,res->end);
> + }
> + if (!res)
> + goto err;
> + dev->priv = (void __force __iomem *) res->start;
> +
> +
> if (plat)
> priv->plat = *plat;
> else
> diff --git a/include/driver.h b/include/driver.h
> index 37797c7..ff4a5a1 100644
> --- a/include/driver.h
> +++ b/include/driver.h
> @@ -276,7 +276,7 @@ static inline struct device_d *add_ns16550_device(int id, resource_size_t start,
> resource_size_t size, int flags, struct NS16550_plat *pdata)
> {
> return add_generic_device("ns16550_serial", id, NULL, start, size,
> - IORESOURCE_MEM | flags, pdata);
> + flags, pdata);
> }
>
> #ifdef CONFIG_DRIVER_NET_DM9K
> diff --git a/include/ns16550.h b/include/ns16550.h
> index 36aa5ff..876bb04 100644
> --- a/include/ns16550.h
> +++ b/include/ns16550.h
> @@ -33,18 +33,9 @@
> struct NS16550_plat {
> /** Clock speed */
> unsigned int clock;
> - /**
> - * register read access capability
> - */
> - unsigned int (*reg_read) (unsigned long base, unsigned char reg_offset);
> - /**
> - * register write access capability
> - */
> - void (*reg_write) (unsigned int val, unsigned long base,
> - unsigned char reg_offset);
> -
> int shift;
> unsigned int flags;
> + int mmio;
Do you really need this 'int mmio' here?
> #define NS16650_FLAG_DISABLE_FIFO 1
> };
>
> --
> 1.7.1
>
>
> _______________________________________________
> barebox mailing list
> barebox@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/barebox
--
--
Best regards,
Antony Pavlov
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
