As barebox has become the true SPL of mioa701 board (no intermediate SPL), a bug was uncovered in the init procedure, where the CPU voltage was to be increased by commanding the I2C voltage regulator, while the I2C was shut down. Fix it by unclock-gating the power I2C bus before using it. Signed-off-by: Robert Jarzmik <robert.jarzmik@xxxxxxx> --- arch/arm/boards/mioa701/board.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/boards/mioa701/board.c b/arch/arm/boards/mioa701/board.c index c46b5da..7ee0be0 100644 --- a/arch/arm/boards/mioa701/board.c +++ b/arch/arm/boards/mioa701/board.c @@ -266,6 +266,7 @@ static int mioa701_coredevice_init(void) * This requires to command the Maxim 1586 to upgrade core voltage to * 1.475 V, on the power I2C bus (device 0x14). */ + CKEN |= CKEN_PWRI2C; CCCR = CCCR_A | 0x20290; PCFR = PCFR_GPR_EN | PCFR_FVC | PCFR_DC_EN | PCFR_PI2C_EN | PCFR_OPDE; PCMD(0) = PCMD_LC | 0x1f; -- 1.7.10.4 _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
