Пятница, 17 января 2014, 16:03 +01:00 от Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>:
> Signed-off-by: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
> ---
> arch/arm/dts/imx27-phytec-phycard-s-som.dts | 25 +++++++++++++++++++++++++
> 1 file changed, 25 insertions(+)
>
> diff --git a/arch/arm/dts/imx27-phytec-phycard-s-som.dts b/arch/arm/dts/imx27-phytec-phycard-s-som.dts
> index c0341da..eba6240 100644
> --- a/arch/arm/dts/imx27-phytec-phycard-s-som.dts
> +++ b/arch/arm/dts/imx27-phytec-phycard-s-som.dts
> @@ -19,6 +19,11 @@
>
> chosen {
> linux,stdout-path = &uart1;
> +
> + environment@0 {
> + compatible = "barebox,environment";
> + device-path = &nfc, "partname:barebox-environment";
> + };
> };
>
> memory {
> @@ -74,4 +79,24 @@
> nand-ecc-mode = "hw";
> nand-on-flash-bbt;
> status = "okay";
> +
> + partition@0 {
> + label = "barebox";
> + reg = <0x0 0x80000>;
> + };
> +
> + partition@1 {
> + label = "barebox-environment";
> + reg = <0x80000 0x80000>;
> + };
I would suggest names "boot" and "env".
This will be transparent to other bootloaders and will
not cause criticism if the change will go into the kernel.
---
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
