Reset GPIO now handled from DTS, no need to touch this in the board. Signed-off-by: Alexander Shiyan <shc_work@xxxxxxx> --- arch/arm/boards/freescale-mx51-pdk/board.c | 9 +-------- 1 file changed, 1 insertion(+), 8 deletions(-) diff --git a/arch/arm/boards/freescale-mx51-pdk/board.c b/arch/arm/boards/freescale-mx51-pdk/board.c index 379313e..711172d 100644 --- a/arch/arm/boards/freescale-mx51-pdk/board.c +++ b/arch/arm/boards/freescale-mx51-pdk/board.c @@ -141,21 +141,14 @@ static void babbage_power_init(void) /* Configure VGEN3 and VCAM regulators to use external PNP */ val = 0x208; mc13xxx_reg_write(mc13xxx, MC13892_REG_MODE_1, val); - udelay(200); -#define GPIO_LAN8700_RESET (1 * 32 + 14) - /* Reset the ethernet controller over GPIO */ - gpio_direction_output(GPIO_LAN8700_RESET, 0); + udelay(200); /* Enable VGEN3, VCAM, VAUDIO, VVIDEO, VSD regulators */ val = 0x49249; mc13xxx_reg_write(mc13xxx, MC13892_REG_MODE_1, val); udelay(200); - - gpio_set_value(GPIO_LAN8700_RESET, 1); - - mdelay(50); } extern char flash_header_imx51_babbage_start[]; -- 1.8.3.2 _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
