phy_register_device() currently requires an attached ethernet device. This is not needed, a phy device can equally well be registered as a standalone device without an ethernet device. Remove the need for an attached ethernet device in phy_register_device. Also, make the edev <-> phy connection on a registered device which simplifies the code. Signed-off-by: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx> --- drivers/net/phy/mdio_bus.c | 4 ---- drivers/net/phy/phy.c | 14 +++----------- 2 files changed, 3 insertions(+), 15 deletions(-) diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c index 87072be..b0fbf2d 100644 --- a/drivers/net/phy/mdio_bus.c +++ b/drivers/net/phy/mdio_bus.c @@ -153,8 +153,6 @@ static int mdio_bus_probe(struct device_d *_dev) int ret; - dev->attached_dev->phydev = dev; - if (drv->probe) { ret = drv->probe(dev); if (ret) @@ -204,8 +202,6 @@ static int mdio_bus_probe(struct device_d *_dev) return 0; err: - dev->attached_dev->phydev = NULL; - dev->attached_dev = NULL; return ret; } diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index 2a33054..d8966cd 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -228,7 +228,7 @@ static int phy_register_device(struct phy_device* dev) { int ret; - dev->dev.parent = &dev->attached_dev->dev; + dev->dev.parent = &dev->bus->dev; ret = register_device(&dev->dev); if (ret) @@ -259,7 +259,6 @@ int phy_device_connect(struct eth_device *edev, struct mii_bus *bus, int addr, goto fail; } - dev->attached_dev = edev; dev->interface = interface; dev->dev_flags = flags; @@ -276,7 +275,6 @@ int phy_device_connect(struct eth_device *edev, struct mii_bus *bus, int addr, if (IS_ERR(dev) || dev->attached_dev) continue; - dev->attached_dev = edev; dev->interface = interface; dev->dev_flags = flags; @@ -287,14 +285,10 @@ int phy_device_connect(struct eth_device *edev, struct mii_bus *bus, int addr, break; } } - - if (!edev->phydev) { - ret = -EIO; - goto fail; - } } - dev = edev->phydev; + edev->phydev = dev; + dev->attached_dev = edev; drv = to_phy_driver(dev->dev.driver); drv->config_aneg(dev); @@ -304,8 +298,6 @@ int phy_device_connect(struct eth_device *edev, struct mii_bus *bus, int addr, return 0; fail: - if (!IS_ERR(dev)) - dev->attached_dev = NULL; puts("Unable to find a PHY (unknown ID?)\n"); return ret; } -- 1.8.5.1 _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox