On Fri, Dec 06, 2013 at 08:17:46PM +0100, Robert Schwebel wrote:
> The definition if the FEC is used is made by the baseboard (MBa6x), not
> by the module (TQMa6x). Move it there.
>
> Signed-off-by: Robert Schwebel <r.schwebel@xxxxxxxxxxxxxx>
> ---
> arch/arm/dts/imx6q-mba6x.dts | 4 ++++
> arch/arm/dts/imx6q-tqma6x.dts | 2 +-
> 2 files changed, 5 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/dts/imx6q-mba6x.dts b/arch/arm/dts/imx6q-mba6x.dts
> index 69d46b4..e057fc4 100644
> --- a/arch/arm/dts/imx6q-mba6x.dts
> +++ b/arch/arm/dts/imx6q-mba6x.dts
> @@ -26,6 +26,10 @@
> };
> };
>
> +&fec {
> + status = "okay";
> +};
> +
This is the wrong file, it's the baseboard for the i.MX6q module only.
Added it to imx6qdl-mba6x.dtsi instead.
> &iomuxc {
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_hog>;
> diff --git a/arch/arm/dts/imx6q-tqma6x.dts b/arch/arm/dts/imx6q-tqma6x.dts
> index 597388e..f556381 100644
> --- a/arch/arm/dts/imx6q-tqma6x.dts
> +++ b/arch/arm/dts/imx6q-tqma6x.dts
> @@ -81,7 +81,7 @@
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_enet_1>;
> phy-mode = "rgmii";
> - status = "okay";
> + status = "disabled";
This is the file you remove in 3/3. Applied this change to
imx6qdl-tqma6x.dtsi instead.
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
