This patchset adds support for Voipac X53-DMM-668 module equipped with i.mx53 CPU. More info about the module may be found at: http://www.voipac.com/#X53-DMM-668 The board specific code enables UART0, NAND flash, Ethernet. Changes since v1: Use gpio_request() Use already defined VMX53 MACH_TYPE A bit of code refactoring Rostislav Lisovy (1): i.MX53: vmx53: Add support for Voipac X53-DMM-668 (aka vmx53) module arch/arm/boards/Makefile | 1 + arch/arm/boards/freescale-mx53-vmx53/Makefile | 3 + arch/arm/boards/freescale-mx53-vmx53/board.c | 183 ++++++++++++++++++++ arch/arm/boards/freescale-mx53-vmx53/env/config | 46 +++++ .../arm/boards/freescale-mx53-vmx53/flash_header.c | 103 +++++++++++ arch/arm/boards/freescale-mx53-vmx53/lowlevel.c | 9 + arch/arm/mach-imx/Kconfig | 9 + 7 files changed, 354 insertions(+) create mode 100644 arch/arm/boards/freescale-mx53-vmx53/Makefile create mode 100644 arch/arm/boards/freescale-mx53-vmx53/board.c create mode 100644 arch/arm/boards/freescale-mx53-vmx53/env/config create mode 100644 arch/arm/boards/freescale-mx53-vmx53/flash_header.c create mode 100644 arch/arm/boards/freescale-mx53-vmx53/lowlevel.c -- 1.7.10.4 _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
