This patchset adds support for Voipac X53-DMM-668 module equipped with i.mx53 CPU. More info about the module may be found at: http://www.voipac.com/#X53-DMM-668 The board specific code enables UART0, NAND flash, Ethernet. The flash_header.c containing DCD configuration data is almost the same (except for one line) as the one in freescale-mx53-smd. Rostislav Lisovy (4): i.mx53: voipac: Change machine type identifier i.mx53: voipac: Add board specific + flash header constructing code i.mx53: voipac: Add barebox environment configuration file i.mx53: voipac: Modify Make- and config-files to enable building of mx53-voipac arch/arm/boards/Makefile | 1 + arch/arm/boards/freescale-mx53-voipac/Makefile | 3 + arch/arm/boards/freescale-mx53-voipac/board.c | 168 ++++++++++++++++++++ arch/arm/boards/freescale-mx53-voipac/env/config | 46 ++++++ .../boards/freescale-mx53-voipac/flash_header.c | 102 ++++++++++++ arch/arm/boards/freescale-mx53-voipac/lowlevel.c | 9 ++ arch/arm/mach-imx/Kconfig | 10 ++ arch/arm/tools/mach-types | 2 +- 8 files changed, 340 insertions(+), 1 deletion(-) create mode 100644 arch/arm/boards/freescale-mx53-voipac/Makefile create mode 100644 arch/arm/boards/freescale-mx53-voipac/board.c create mode 100644 arch/arm/boards/freescale-mx53-voipac/env/config create mode 100644 arch/arm/boards/freescale-mx53-voipac/flash_header.c create mode 100644 arch/arm/boards/freescale-mx53-voipac/lowlevel.c -- 1.7.10.4 _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox