Dear barebox developers and users; I am compiling barebox for freescale-imx53-smd board. My issue is, that the image does not contain the correct size record. The "bootloader size" needed by the flashing tool is initialized in freescale-mx53-smd/flash_header.c, in structure flash_header, field .boot_data.size. Formerly there used to be a hardcoded value 0x40000, nowadays we use DCD_BAREBOX_SIZE which expands into (barebox_image_size + 4095), where "barebox_image_size" has real size computed by the linker. When the value .boot_data.size is filled by hand (as 0x40000), correct value is stored in the barebox image. Proof: hexdump -s 0x24 -n 4 barebox-flash-image 0000024 0000 0004 however if .boot_data.size = DCD_BAREBOX_SIZE, $ hexdump -s 0x24 -n 4 barebox-flash-image 0000024 0fff 0000 where this 0xfff is the "+4095" added to round the value. (I am pretty sure the offset into the image used by hexdump is correct). The barebox version I am using most recent git, branch master. The compiler (maybe here is the point of failure) is arm-cortex_a8-linux-gnueabi-gcc (crosstool-NG hg+default-86a8d1d467c8) 4.4.6. I will appreciate any help; Rostislav Lisovy _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
