Hello. USB functionality on PCM038 (PCM970) is broken again due patch "Revert usb: chipidea-imx: Fix usb initialization". Board: Phytec phyCORE-i.MX27 detected i.MX27 revision 2.1 netconsole: registered as cs1 mc13xxx-spi mc137830: Found MC13783 ID: 0x00009b [Rev: 3.1] cfi_flash cfi_flash0: found cfi flash at c0000000, size 33554432 nand: NAND device: Manufacturer ID: 0x20, Chip ID: 0x36 (ST Micro NAND 64MiB 1,8V 8-bit), 64MiB, page size: 512, OOB size: 16 Bad block table found at page 131040, version 0x01 Bad block table found at page 131008, version 0x01 imxfb imxfb: i.MX Framebuffer driver mdio_bus: miibus0: probed No ULPI found. vid: 0x0000 pid: 0x0000 pcm038: Using environment in NOR Flash No ULPI found. vid: 0x0000 pid: 0x0000 imx-usb imx-usb2: USB EHCI 1.00 imx-mmc imx-mmc1: registered as imx-mmc1 running /env/bin/init... After remove this patch, all works fine. Board: Phytec phyCORE-i.MX27 detected i.MX27 revision 2.1 netconsole: registered as cs1 mc13xxx-spi mc137830: Found MC13783 ID: 0x00009b [Rev: 3.1] cfi_flash cfi_flash0: found cfi flash at c0000000, size 33554432 nand: NAND device: Manufacturer ID: 0x20, Chip ID: 0x36 (ST Micro NAND 64MiB 1,8V 8-bit), 64MiB, page size: 512, OOB size: 16 Bad block table found at page 131040, version 0x01 Bad block table found at page 131008, version 0x01 imxfb imxfb: i.MX Framebuffer driver mdio_bus: miibus0: probed Found NXP ISP150x ULPI transceiver (0x04cc:0x1504). pcm038: Using environment in NOR Flash Found NXP ISP150x ULPI transceiver (0x04cc:0x1504). imx-usb imx-usb2: USB EHCI 1.00 imx-mmc imx-mmc1: registered as imx-mmc1 running /env/bin/init... --- _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
