On Thu, Jul 04, 2013 at 03:40:48PM +0200, Adam Furmanczuk wrote: > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > Hi all, > > on my ICnova mx53 so dimm board I am currently bound to barebox > version 2012.03.0-00162. There is no "global" and no "go" procedure, > that help me in current barebox release. > > Runing "bootm /mnt/barebox.bin" > where barebox.bin is the compiled 2013.05 or 2013.06 version does not > work, output: "Unknown OS type".. > > There is however the "bootsrc" variable, how can I find more variables? > For example eth0 exists, and devinfo eth0 gives me network configuration > > I wanted to somehow "chainload" one barebox into the other. How can I > achieve that? Flashing is currently no option, I have too little > experience with openocd. Looking at the datasheet there is pin 8 connected with BOOT_MODE[0|1]. This maybe allows you to use USB update mode. Try pulling this pin up. Try connecting the USB OTG port to a PC, powercycle the board and do a lsusb. DO you see something with 'Freescale' in the list? Sascha -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
