The same value as used in Mainline and Freescale U-Boot. This might increase the stability of i.MX51 boards. The 5:1 ratio we have in barebox probably goes back to copy/paste from the i.MX53 code. Signed-off-by: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx> --- arch/arm/mach-imx/imx51.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-imx/imx51.c b/arch/arm/mach-imx/imx51.c index c75534e..0771f94 100644 --- a/arch/arm/mach-imx/imx51.c +++ b/arch/arm/mach-imx/imx51.c @@ -196,7 +196,7 @@ void imx51_init_lowlevel(unsigned int cpufreq_mhz) imx5_setup_pll_216((void __iomem *)MX51_PLL3_BASE_ADDR); /* Set the platform clock dividers */ - writel(0x00000124, MX51_ARM_BASE_ADDR + 0x14); + writel(0x00000125, MX51_ARM_BASE_ADDR + 0x14); /* Run at Full speed */ writel(0x0, ccm + MX5_CCM_CACRR); -- 1.8.3.1 _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
