Dear Sebastian Hesselbarth, On Sun, 19 May 2013 20:23:44 +0200, Sebastian Hesselbarth wrote: > After power-up, Marvell EBU SoCs are common enough to justify common > init code. All SoCs start up with internal registers mapped at 0xd0000000 > and Linux wants them remapped to 0xf1000000 which gives ~512M contiguous > address space. As internal registers base address is remapped from within > internal registers itself, we do this remap as soon as possible. > > This patch set consolidates lowlevel init for all MVEBU SoCs which is > currently performed on every board supported. Also common console UART > is created. Then Dove, Armada 370/XP, and Kirkwood are moved to use > common init functions, and finally all board specific init is removed > to its bare minimum. > > The patch set has been tested on CuBox (Dove), Guruplug (Kirkwood), > Mirabox and OpenBlocks AX3 (Armada 370) by either me or Thomas Petazzoni. > > Sebastian Hesselbarth (11): > arm: mvebu: add more visible SoC separators to Kconfig > arm: mvebu: introduce common lowlevel and early init > arm: mvebu: introduce common console UART config > arm: mvebu: convert Dove to common init > arm: mvebu: convert Armada 370/XP to common init > arm: mvebu: convert Kirkwood to common init > arm: mvebu: convert SolidRun CuBox to common init > arm: mvebu: convert Globalscale Mirabox to common init > arm: mvebu: convert PlatHome OpenBlocks AX3 to common init > arm: mvebu: convert Marvell Armada XP GP board to common init > arm: mvebu: convert Globalscale Guruplug to common init For the entire series: Acked-by: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx> Tested-by: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx> Best regards, Thomas -- Thomas Petazzoni, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
