Dear Gregory CLEMENT, On Wed, 08 May 2013 23:53:40 +0200, Gregory CLEMENT wrote: > > - Add an integration of kwbimage to the Barebox build process. Now, > > when an ARCH_MVEBU platform is selected, a barebox.kwb file is > > automatically generated using the board kwbimage.cfg, and a > > barebox.kwbuart is generated using the board kwbimage.cfg + an > > override of the boot media to be UART. > > It is a very nice improvement however, you should maybe mention somwhere > that you expect to find a file named binary.0 at the root of the barebox > sources. But it is not very important. Indeed, but which "somewhere" do you suggest? > However you didn't manage the out of tree building when KBUILD_OUTPUT is > set. This is more annoying but it should be easily fixed. Aah, I haven't thought of out-of-tree build. I'll test that and I'll have a look. > It didn't work for me when I tested the on the OpenBlocks AX3. The boot > media didn't seem to have been overridden ie it still try to boot on the > NOR. And if I modify the file arch/arm/boards/plathome-openblocks-ax3//kwbimage.cfg > and replace spi by uart, then it works. Are you sure you used barebox.kwbuart and not barebox.kwb? Thanks for your testing! Thomas -- Thomas Petazzoni, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
