Hi Sacha, Le Wed, 3 Apr 2013 09:09:40 +0200, Sascha Hauer <s.hauer@xxxxxxxxxxxxxx> a écrit : > With CONFIG_MMU_EARLY enabled the board does not survive the call > to imx53_init_lowlevel(). This should not happen, but the reasons > are currently unknown. This works on other boards like the i.MX53 > QSB. > This patch moves the call to imx53_init_lowlevel to > barebox_arm_reset_vector() which is executed with MMU disabled. > FWIW : on the QSB I also met this kind of problem : - when the board is configured for serial download boot (bootmode 0 & 1 = 1) : barebox fails to execute if MMU is enabled - when the board is configured for usual SDCard boot and the SDCard is not inserted, the bootrom falls back to serial download mode and then barebox runs fine even with MMU enabled. Best regards, Eric _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
