if the flash has a known type, the ONFI detection won't occur
and thus we may not detect the right parameters.
By testing both namd and pagesize, as done in the kernel, we
can detect ONFI flash with know IDs.
As an example on an i.MX53 board :
- without the patch :
NAND device: Manufacturer ID: 0x2c, Chip ID: 0xd3
(Micron NAND 1GiB 3,3V 8-bit), page size: 4096, OOB size: 128
- with the patch :
ONFI flash detected ... ONFI param page 0 valid
NAND device: Manufacturer ID: 0x2c, Chip ID: 0xd3
(Micron MT29F8G08ABACAWP), page size: 4096, OOB size: 224
in the first case the OOB size is wrong.
Signed-off-by: Eric Bénard <eric@xxxxxxxxxx>
---
v2: correctly integrate the kernel change so that if the flash ID
is not known (when the flash in a recent ONFI one), we don't get
a NULL pointer for type and thus a crash.
drivers/mtd/nand/nand_base.c | 13 ++++++-------
1 file changed, 6 insertions(+), 7 deletions(-)
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index fa10d95..c63aaf9 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -1179,16 +1179,15 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
return ERR_PTR(-ENODEV);
}
- /* Lookup the flash id */
- for (i = 0; nand_flash_ids[i].name != NULL; i++) {
- if (dev_id == nand_flash_ids[i].id) {
- type = &nand_flash_ids[i];
+ if (!type)
+ type = nand_flash_ids;
+
+ for (; type->name != NULL; type++)
+ if (dev_id == type->id)
break;
- }
- }
chip->onfi_version = 0;
- if (!type) {
+ if (!type->name || !type->pagesize) {
/* Check is chip is ONFI compliant */
ret = nand_flash_detect_onfi(mtd, chip, &busw);
if (ret)
--
1.7.11.7
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
