On Tue, Mar 26, 2013 at 10:11:21AM +0100, Steffen Trumtrar wrote: > Hi! > > This is mostly a repost of v3. Only changes are in 4/5. > The final image now gets always piped through zynq_mkimage. This is needed > anyway, so do it always. > This tool will eventually replace all the flash_header linker stuff, although > it is pretty simple on the Zynq. > > Regards, > Steffen > > Steffen Trumtrar (5): > serial: Add driver for Cadence UART > ARM: zynq: Add new architecture zynq > ARM: zynq: add clk support for zynq7000 > ARM: zynq: add zynq fsbl checksum script > ARM: zynq: Add support for the Avnet Zedboard Applied, thanks. The version numbers get lost while applying anyway, so I hope this won't be an issue. Sascha > > .gitignore | 1 + > arch/arm/Kconfig | 5 + > arch/arm/Makefile | 10 + > arch/arm/boards/avnet-zedboard/Makefile | 3 + > arch/arm/boards/avnet-zedboard/board.c | 38 ++ > arch/arm/boards/avnet-zedboard/config.h | 4 + > .../boards/avnet-zedboard/env/init/config-board | 7 + > arch/arm/boards/avnet-zedboard/flash_header.c | 62 +++ > arch/arm/boards/avnet-zedboard/lowlevel.c | 252 +++++++++++++ > arch/arm/configs/zedboard_defconfig | 49 +++ > arch/arm/mach-zynq/Kconfig | 38 ++ > arch/arm/mach-zynq/Makefile | 1 + > arch/arm/mach-zynq/clk-zynq7000.c | 417 +++++++++++++++++++++ > arch/arm/mach-zynq/devices.c | 8 + > arch/arm/mach-zynq/include/mach/barebox.lds.h | 8 + > arch/arm/mach-zynq/include/mach/clkdev.h | 6 + > arch/arm/mach-zynq/include/mach/debug_ll.h | 37 ++ > arch/arm/mach-zynq/include/mach/devices.h | 13 + > .../arm/mach-zynq/include/mach/zynq-flash-header.h | 38 ++ > arch/arm/mach-zynq/include/mach/zynq7000-regs.h | 132 +++++++ > arch/arm/mach-zynq/zynq.c | 56 +++ > drivers/serial/Kconfig | 5 + > drivers/serial/Makefile | 1 + > drivers/serial/serial_cadence.c | 307 +++++++++++++++ > include/asm-generic/barebox.lds.h | 3 +- > scripts/.gitignore | 1 + > scripts/Makefile | 1 + > scripts/zynq_mkimage.c | 86 +++++ > 28 files changed, 1588 insertions(+), 1 deletion(-) > create mode 100644 arch/arm/boards/avnet-zedboard/Makefile > create mode 100644 arch/arm/boards/avnet-zedboard/board.c > create mode 100644 arch/arm/boards/avnet-zedboard/config.h > create mode 100644 arch/arm/boards/avnet-zedboard/env/init/config-board > create mode 100644 arch/arm/boards/avnet-zedboard/flash_header.c > create mode 100644 arch/arm/boards/avnet-zedboard/lowlevel.c > create mode 100644 arch/arm/configs/zedboard_defconfig > create mode 100644 arch/arm/mach-zynq/Kconfig > create mode 100644 arch/arm/mach-zynq/Makefile > create mode 100644 arch/arm/mach-zynq/clk-zynq7000.c > create mode 100644 arch/arm/mach-zynq/devices.c > create mode 100644 arch/arm/mach-zynq/include/mach/barebox.lds.h > create mode 100644 arch/arm/mach-zynq/include/mach/clkdev.h > create mode 100644 arch/arm/mach-zynq/include/mach/debug_ll.h > create mode 100644 arch/arm/mach-zynq/include/mach/devices.h > create mode 100644 arch/arm/mach-zynq/include/mach/zynq-flash-header.h > create mode 100644 arch/arm/mach-zynq/include/mach/zynq7000-regs.h > create mode 100644 arch/arm/mach-zynq/zynq.c > create mode 100644 drivers/serial/serial_cadence.c > create mode 100644 scripts/zynq_mkimage.c > > -- > 1.8.2.rc2 > > > _______________________________________________ > barebox mailing list > barebox@xxxxxxxxxxxxxxxxxxx > http://lists.infradead.org/mailman/listinfo/barebox > -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
