Hi Jeff, On Wed, Mar 13, 2013 at 04:28:33PM -0700, Jeff Horn wrote: > Hi, > > I have a custom board based on the i.MX53. We are using barebox 2012.05.0 > and booting the Freescale 2.6.35.3 kernel. Our board has SPI NOR (m25p32) > and I saw there is a driver in a more recent barebox. I pulled 2013.01.0 > and added our board files but I can't seem to get the kernel to load. I > used the uimage tool and the -i option reported back that it can read the > kernel and the -v option reported ok. When I try and boot I see > arch_number and then nothing. > > I'm continuing to dig in to see what I can find. Any pointers to where I > can look is much appreciated. The first thing you should check is whether your kernel is stored correctly on the NOR flash. try a: erase /dev/nor0 cp /someimage /dev/nor0 crc32 -f /someimage ls -l /someimage crc32 -f /dev/nor0 0+x (with x being the size of /someimage as output by ls -l) Sascha -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
