On 08:41 Fri 08 Mar , Sascha Hauer wrote:
> On Thu, Mar 07, 2013 at 12:45:18AM +0100, Jean-Christophe PLAGNIOL-VILLARD wrote:
> > take from xloader
> >
> > with this the mmc work even when booting from nand
>
> Which beagle board revision do you have? With this patch the MMC
> doesn't work at all anymore, even when booting from it.
c3
Best Regards,
J.
>
> Sascha
>
> >
> > Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
> > ---
> > arch/arm/boards/beagle/board.c | 29 ++++++++++++++++++++++++++++-
> > 1 file changed, 28 insertions(+), 1 deletion(-)
> >
> > diff --git a/arch/arm/boards/beagle/board.c b/arch/arm/boards/beagle/board.c
> > index bed4651..6e69e87 100644
> > --- a/arch/arm/boards/beagle/board.c
> > +++ b/arch/arm/boards/beagle/board.c
> > @@ -63,6 +63,7 @@
> > #include <linux/err.h>
> > #include <usb/ehci.h>
> > #include <mach/xload.h>
> > +#include <mfd/twl4030.h>
> >
> > #ifdef CONFIG_DRIVER_SERIAL_NS16550
> >
> > @@ -109,6 +110,32 @@ static struct gpmc_nand_platform_data nand_plat = {
> > .nand_cfg = &omap3_nand_cfg,
> > };
> >
> > +/* T2 Register definitions */
> > +#define CONTROL_DEV_CONF0 0x48002274
> > +#define CONTROL_PBIAS_LITE 0x48002520
> > +
> > +static void beagle_add_mmc(void)
> > +{
> > + unsigned int value = 0;
> > + struct twl4030 *t = twl4030_get();
> > +
> > + if (!t) {
> > + pr_warn("twl4030 not ready to setup mmc\n");
> > + } else {
> > + twl4030_reg_write(t, TWL4030_USB_OTHER_FUNC_CTRL_CLR, 0x20);
> > + twl4030_reg_write(t, TWL4030_USB_OTHER_IFC_CTRL_CLR, 0x2);
> > + }
> > +
> > + value = readl(CONTROL_PBIAS_LITE);
> > + value |= (1 << 2) | (1 << 1) | (1 << 9);
> > + writel(value, CONTROL_PBIAS_LITE);
> > +
> > + value = readl(CONTROL_DEV_CONF0);
> > + writel(value | (1 << 24), CONTROL_PBIAS_LITE);
> > +
> > + omap3_add_mmc1(NULL);
> > +}
> > +
> > static int beagle_mem_init(void)
> > {
> > omap_add_ram0(SZ_128M);
> > @@ -132,7 +159,7 @@ static int beagle_devices_init(void)
> > #endif
> > omap_add_gpmc_nand_device(&nand_plat);
> >
> > - omap3_add_mmc1(NULL);
> > + beagle_add_mmc();
> >
> > armlinux_set_bootparams((void *)0x80000100);
> > armlinux_set_architecture(MACH_TYPE_OMAP3_BEAGLE);
> > --
> > 1.7.10.4
> >
> >
> > _______________________________________________
> > barebox mailing list
> > barebox@xxxxxxxxxxxxxxxxxxx
> > http://lists.infradead.org/mailman/listinfo/barebox
> >
>
> --
> Pengutronix e.K. | |
> Industrial Linux Solutions | http://www.pengutronix.de/ |
> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
> Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
