Juergen Beisert wrote:
> [...]
> if (rc != 0)
> printf("Cannot create the 'env0' persistant environment storage (%d)\n", rc);
___^
Arrghh, still two 'a' left. :(
diff --git a/arch/arm/boards/chumby_falconwing/falconwing.c b/arch/arm/boards/chumby_falconwing/falconwing.c
index 0818666..a9e1c00 100644
--- a/arch/arm/boards/chumby_falconwing/falconwing.c
+++ b/arch/arm/boards/chumby_falconwing/falconwing.c
@@ -274,7 +274,7 @@ mem_initcall(falconwing_mem_init);
* If this SD card is also the boot media, we can use the second partition
* for our environment purpose (if present!).
*/
-static int register_persistant_environment(void)
+static int register_persistent_environment(void)
{
struct cdev *cdev;
@@ -338,9 +338,9 @@ static int falconwing_devices_init(void)
armlinux_set_bootparams((void *)IMX_MEMORY_BASE + 0x100);
armlinux_set_architecture(MACH_TYPE_CHUMBY);
- rc = register_persistant_environment();
+ rc = register_persistent_environment();
if (rc != 0)
- printf("Cannot create the 'env0' persistant environment storage (%d)\n", rc);
+ printf("Cannot create the 'env0' persistent environment storage (%d)\n", rc);
return 0;
}
@@ -393,7 +393,7 @@ make ARCH=arm CROSS_COMPILE=armv5compiler
- Create four primary partitions on the MCI card
- the first one for the bootlets (about 256 kiB)
- - the second one for the persistant environment (size is up to you, at least 256k)
+ - the second one for the persistent environment (size is up to you, at least 256k)
- the third one for the kernel (2 MiB ... 4 MiB in size)
- the 4th one for the root filesystem which can fill the rest of the available space
jbe
--
Pengutronix e.K. | Juergen Beisert |
Linux Solutions for Science and Industry | http://www.pengutronix.de/ |
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
