On 18:40 Wed 13 Feb , Sascha Hauer wrote:
> On Wed, Feb 13, 2013 at 09:20:09PM +0400, Alexander Shiyan wrote:
> > > > Signed-off-by: Alexander Shiyan <shc_work@xxxxxxx>
> > > > ---
> > > > arch/arm/boards/clep7212/lowlevel.c | 6 +++++-
> > > > arch/arm/mach-clps711x/Kconfig | 13 +++++++++++++
> > > > arch/arm/mach-clps711x/include/mach/clps711x.h | 2 +-
> > > > arch/arm/mach-clps711x/lowlevel.c | 7 +++++--
> > > > 4 files changed, 24 insertions(+), 4 deletions(-)
> > > >
> > > > diff --git a/arch/arm/boards/clep7212/lowlevel.c b/arch/arm/boards/clep7212/lowlevel.c
> > > > index b7d6d1d..fcf8285 100644
> > > > --- a/arch/arm/boards/clep7212/lowlevel.c
> > > > +++ b/arch/arm/boards/clep7212/lowlevel.c
> > > > @@ -14,9 +14,13 @@
> > > >
> > > > #include <mach/clps711x.h>
> > > >
> > > > +#if (CONFIG_CLPS711X_CPU_PLL_MULT < 20) || (CONFIG_CLPS711X_CPU_PLL_MULT > 50)
> > > > +# error "CPU PLL multiplier out of range"
> > > > +#endif
> > > > +
> > > > void __naked __bare_init barebox_arm_reset_vector(void)
> > > > {
> > > > arm_cpu_lowlevel_init();
> > > >
> > > > - clps711x_barebox_entry();
> > > > + clps711x_barebox_entry(CONFIG_CLPS711X_CPU_PLL_MULT);
> > >
> > > I don't quite understand why you want to have this configurable. I mean
> > > this is a single board only, why not simply run it with the maximum
> > > allowed frequency? Or does this board come with multiple SoCs for which
> > > different maximum values exist?
> >
> > Yes. There are 2 versions of the chip. One with a maximum operating
> > frequency of 74 MHz, second with 90 MHz. The only difference is on the CPU label.
> > Which version is used, it is impossible to know in runtime.
> > You can simply reject this patch [3/9], all other should not depend on this one.
> > Later I'll try to make another different version.
>
> Ok, thanks for explaining. It's really discouraged to put such things in
> Kconfig, but in this case it seems acceptable: There's no way to detect
> it during runtime *and* it varies across the same board type. So I
> applied this series.
>
> One option out of this might be that you could always startup with 74MHz
> and add a command to switch to 90MHz. You could put this into the
> environment on boards that you know work with 90MHz. Aynway, I don't
> want to force you to do this on an Architecture you're probably
> currently the only user of.
agress if not possible so use specific KConfig not a value
Best Regards,
J.
>
> Sascha
>
> --
> Pengutronix e.K. | |
> Industrial Linux Solutions | http://www.pengutronix.de/ |
> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
> Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
>
> _______________________________________________
> barebox mailing list
> barebox@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/barebox
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
