On Fri, Feb 08, 2013 at 11:20:49PM +0400, Alexander Shiyan wrote: > > Subject: i.MX53: Add WEIM register defines ( same as i.MX51 ) > > > > Signed-off-by: George Pontis <gpontis@xxxxxxxxxxx> > > > > diff -Naur bb.a/arch/arm/mach-imx/include/mach/imx53-regs.h > > bb.b/arch/arm/mach-imx/include/mach/imx53-regs.h > > --- bb.a/arch/arm/mach-imx/include/mach/imx53-regs.h 2013-02-04 > > 06:24:51.000000000 -0800 > > +++ bb.b/arch/arm/mach-imx/include/mach/imx53-regs.h 2013-02-06 > > 23:14:45.982747680 -0800 > > @@ -1,6 +1,17 @@ > > #ifndef __MACH_IMX53_REGS_H > > #define __MACH_IMX53_REGS_H > > > > +/* WEIM registers */ > > +#define WEIM_CSxGCR1(n) (((n) * 0x18) + 0x00) > > +#define WEIM_CSxGCR2(n) (((n) * 0x18) + 0x04) > > +#define WEIM_CSxRCR1(n) (((n) * 0x18) + 0x08) > > +#define WEIM_CSxRCR2(n) (((n) * 0x18) + 0x0c) > > +#define WEIM_CSxWCR1(n) (((n) * 0x18) + 0x10) > > +#define WEIM_CSxWCR2(n) (((n) * 0x18) + 0x14) > > +#define WEIM_WCR 0x90 > > +#define WEIM_WIAR 0x94 > > +#define WEIM_EAR 0x98 > > If register set is really same as i.MX51, then probably we should > move these definitions from imx51-regs.h to imx5.h. Sascha? Even better add a imx53_setup_weimcs() function like we have for various other i.MXes in mach/weim.h. (add a imx5_setup_weimcs function which has an additional base address argument. This would then be called from imx51_setup_weimcs/imx53_setup_weimcs). Sascha -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
