Having some trouble booting Linux from recent versions of barebox, and need some pointers about where to look. I'm working with custom hardware based on the i.MX53. It is roughly comparable to the i.MX53 LOCO board, and I started with that board support as a base for my own port. Up through barebox 2012.12.1 things were working well. However, with the 2013.01 and 2013.02 releases I can't get the kernel to boot successfully. It always hangs after displaying the arch number, but before posting the message "Booting Linux on physical CPU 0". All the lines displayed up to that point are identical. I have tried booting a kernel via TFTP and root FS via NFS. Also with the rootfs loaded as an initrd. The same barebox environment, kernel, and rootfs works in both modes when I'm running 2012.12.1 or 2012.11. I see that a new environment has been introduced during this time, but did not do anything to move over to it. Could this be the source of my problem, or need I look elsewhere ? George _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
