Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
---
drivers/clocksource/Kconfig | 4 ++
drivers/clocksource/Makefile | 1 +
drivers/clocksource/amba-sp804.c | 89 ++++++++++++++++++++++++++++++++++++++
3 files changed, 94 insertions(+)
create mode 100644 drivers/clocksource/amba-sp804.c
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index 09acdd7..3f27cf2 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -1,3 +1,7 @@
+config AMBA_SP804
+ bool
+ depends on ARM_AMBA
+
config ARM_SMP_TWD
bool
depends on ARM && CPU_V7
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index 92d7c13..b0bc8bd 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -1,3 +1,4 @@
+obj-$(CONFIG_AMBA_SP804) += amba-sp804.o
obj-$(CONFIG_ARM_SMP_TWD) += arm_smp_twd.o
obj-$(CONFIG_CLOCKSOURCE_BCM2835) += bcm2835.o
obj-$(CONFIG_CLOCKSOURCE_NOMADIK) += nomadik.o
diff --git a/drivers/clocksource/amba-sp804.c b/drivers/clocksource/amba-sp804.c
new file mode 100644
index 0000000..bb6facc
--- /dev/null
+++ b/drivers/clocksource/amba-sp804.c
@@ -0,0 +1,89 @@
+/*
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnio@xxxxxxxxxxxx>
+ *
+ * Under GPL v2
+ */
+#include <common.h>
+#include <init.h>
+#include <clock.h>
+#include <io.h>
+#include <driver.h>
+#include <errno.h>
+#include <linux/amba/bus.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+
+#include <asm/hardware/arm_timer.h>
+
+static __iomem void *sp804_base;
+static struct clk *sp804_clk;
+
+static uint64_t sp804_read(void)
+{
+ return ~readl(sp804_base + TIMER_VALUE);
+}
+
+static struct clocksource sp804_clksrc = {
+ .read = sp804_read,
+ .shift = 20,
+ .mask = CLOCKSOURCE_MASK(32),
+};
+
+static int sp804_probe(struct amba_device *dev, const struct amba_id *id)
+{
+ u32 tick_rate;
+ int ret;
+
+ sp804_clk = clk_get(&dev->dev, NULL);
+ if (IS_ERR(sp804_clk)) {
+ ret = PTR_ERR(sp804_clk);
+ dev_err(&dev->dev, "clock not found: %d\n", ret);
+ return ret;
+ }
+
+ ret = clk_enable(sp804_clk);
+ if (ret < 0) {
+ dev_err(&dev->dev, "clock failed to enable: %d\n", ret);
+ clk_put(sp804_clk);
+ return ret;
+ }
+
+ sp804_base = amba_get_mem_region(dev);
+
+ tick_rate = clk_get_rate(sp804_clk);
+
+ /* setup timer 0 as free-running clocksource */
+ writel(0, sp804_base + TIMER_CTRL);
+ writel(0xffffffff, sp804_base + TIMER_LOAD);
+ writel(0xffffffff, sp804_base + TIMER_VALUE);
+ writel(TIMER_CTRL_32BIT | TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC,
+ sp804_base + TIMER_CTRL);
+
+ sp804_clksrc.mult = clocksource_hz2mult(tick_rate, sp804_clksrc.shift);
+
+ init_clock(&sp804_clksrc);
+
+ return 0;
+}
+
+static struct amba_id sp804_ids[] = {
+ {
+ .id = 0x00141804,
+ .mask = 0x00ffffff,
+ },
+ { 0, 0 },
+};
+
+struct amba_driver sp804_driver = {
+ .drv = {
+ .name = "sp804",
+ },
+ .probe = sp804_probe,
+ .id_table = sp804_ids,
+};
+
+static int sp804_init(void)
+{
+ return amba_driver_register(&sp804_driver);
+}
+coredevice_initcall(sp804_init);
--
1.7.10.4
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
