Hi Sascha,
On Thu, Feb 07, 2013 at 12:54:46PM +0100, Sascha Hauer wrote:
> On Thu, Feb 07, 2013 at 12:40:32PM +0100, Alexander Aring wrote:
> > Hi Sascha,
> >
> > On Thu, Feb 07, 2013 at 12:00:48PM +0100, Sascha Hauer wrote:
> > > On Thu, Feb 07, 2013 at 11:44:59AM +0100, Alexander Aring wrote:
> > > > Useful to detect timing problems if someone porting a new
> > > > device to barebox.
> > > >
> > > > This test includes a data bus test, address bus test and
> > > > integrity check of memory.
> > > >
> > > > Allocated barebox regions between start and end will skip
> > > > automatically.
> > > >
> > > > Signed-off-by: Alexander Aring <alex.aring@xxxxxxxxx>
> > > > ---
> > > > common/Kconfig | 7 +
> > > > common/Makefile | 1 +
> > > > common/memory_test.c | 399 ++++++++++++++++++++++++++++++++++++++++++++++++++
> > > > include/memory_test.h | 13 ++
> > > > 4 files changed, 420 insertions(+)
> > > > create mode 100644 common/memory_test.c
> > > > create mode 100644 include/memory_test.h
> > > >
> > > > diff --git a/common/Kconfig b/common/Kconfig
> > > > index 3f6c11e..c6988df 100644
> > > > --- a/common/Kconfig
> > > > +++ b/common/Kconfig
> > > > @@ -100,6 +100,13 @@ config MEMINFO
> > > > bool "display memory info"
> > > > default y
> > > >
> > > > +config MEMTEST
> > > > + bool "Offers routines for memory test"
> > > > + help
> > > > + Offers memtest routines in common/memory_test.c
> > > > + This is helpful for porting devices to detect
> > > > + memory timing problems.
> > > > +
> > > > config ENVIRONMENT_VARIABLES
> > > > bool "environment variables support"
> > > >
> > > > diff --git a/common/Makefile b/common/Makefile
> > > > index 7206eed..684953c 100644
> > > > --- a/common/Makefile
> > > > +++ b/common/Makefile
> > > > @@ -17,6 +17,7 @@ obj-$(CONFIG_MALLOC_DLMALLOC) += dlmalloc.o
> > > > obj-$(CONFIG_MALLOC_TLSF) += tlsf_malloc.o
> > > > obj-$(CONFIG_MALLOC_TLSF) += tlsf.o
> > > > obj-$(CONFIG_MALLOC_DUMMY) += dummy_malloc.o
> > > > +obj-$(CONFIG_MEMTEST) += memory_test.o
> > > > obj-y += clock.o
> > > > obj-$(CONFIG_BANNER) += version.o
> > > > obj-$(CONFIG_MEMINFO) += meminfo.o
> > > > diff --git a/common/memory_test.c b/common/memory_test.c
> > > > new file mode 100644
> > > > index 0000000..80b4ff4
> > > > --- /dev/null
> > > > +++ b/common/memory_test.c
> > > > @@ -0,0 +1,399 @@
> > > > +/*
> > > > + * memory_test.c
> > > > + *
> > > > + * Copyright (c) 2013 Alexander Aring <aar@xxxxxxxxxxxxxx>, Pengutronix
> > > > + *
> > > > + * See file CREDITS for list of people who contributed to this
> > > > + * project.
> > > > + *
> > > > + * This program is free software; you can redistribute it and/or modify
> > > > + * it under the terms of the GNU General Public License version 2
> > > > + * as published by the Free Software Foundation.
> > > > + *
> > > > + * This program is distributed in the hope that it will be useful,
> > > > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > > > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > > > + * GNU General Public License for more details.
> > > > + *
> > > > + */
> > > > +
> > > > +#include <memory_test.h>
> > > > +
> > > > +static const vu_long bitpattern[] = {
> > > > + 0x00000001, /* single bit */
> > > > + 0x00000003, /* two adjacent bits */
> > > > + 0x00000007, /* three adjacent bits */
> > > > + 0x0000000F, /* four adjacent bits */
> > > > + 0x00000005, /* two non-adjacent bits */
> > > > + 0x00000015, /* three non-adjacent bits */
> > > > + 0x00000055, /* four non-adjacent bits */
> > > > + 0xAAAAAAAA, /* alternating 1/0 */
> > > > +};
> > > > +
> > > > +/*
> > > > + * Perform a memory test. The complete test
> > > > + * loops until interrupted by ctrl-c.
> > > > + *
> > > > + * Highly recommended to test with disabled and
> > > > + * enabled cache.
> > > > + *
> > > > + * start: start address
> > > > + * end: end address
> > > > + * bus_only: skip integrity check
> > > > + */
> > > > +int mem_test(vu_long _start, vu_long _end,
> > > > + int bus_only)
> > > > +{
> > >
> > > I thought we agreed on using request_sdram_region here and drop the
> > > address_in_sdram_regions in this function.
> > >
> >
> > I don't know what you meant :-(
> > Sorry.
> >
> > You want that I am checking if a region is already requested.
>
> I didn't want that you check if a region is already requested, I want
> you to request the region that you are testing. That's what
> request_sdram_region is good for. Just use it.
>
> > In that case request_sdram_region will return NULL. Then I know it isn't
> > a barebox region.
> > That's ok until integrity check.
> > This will check 4-bytewise if this is a reqyested region and if not it
> > will create them.
> > I can do this, but this will result a long list of requested regions.
>
> Drop the address_in_sdram_regions completely from this function.
> Instead, do a request_sdram_region in the memtest command.
>
I will try to do that. Apologize for the inconvenience. It takes long
time to write a new memtest command... but good software will take a
long time.
Regards
Alex
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
