On 11:05 Wed 06 Feb , Alexander Aring wrote:
> Hi,
>
> On Tue, Feb 05, 2013 at 07:03:00PM +0100, Jean-Christophe PLAGNIOL-VILLARD wrote:
> > and dynamised where we are stored
> >
> > Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
> > ---
> > arch/arm/boards/sama5d3xek/init.c | 24 ++++++++++++++++--------
> > 1 file changed, 16 insertions(+), 8 deletions(-)
> >
> > diff --git a/arch/arm/boards/sama5d3xek/init.c b/arch/arm/boards/sama5d3xek/init.c
> > index 110a83f..165aaac 100644
> > --- a/arch/arm/boards/sama5d3xek/init.c
> > +++ b/arch/arm/boards/sama5d3xek/init.c
> > @@ -36,6 +36,7 @@
> > #include <mach/at91_pmc.h>
> > #include <mach/at91_rstc.h>
> > #include <mach/at91sam9x5_matrix.h>
> > +#include <mach/bootmode.h>
> > #include <input/qt1070.h>
> > #include <readkey.h>
> > #include <poller.h>
> > @@ -381,14 +382,21 @@ static int at91sama5d3xek_devices_init(void)
> >
> > armlinux_set_bootparams((void *)(SAMA5_DDRCS + 0x100));
> >
> > - devfs_add_partition("nand0", 0x00000, SZ_256K, DEVFS_PARTITION_FIXED, "at91bootstrap_raw");
> > - dev_add_bb_dev("at91bootstrap_raw", "at91bootstrap");
> > - devfs_add_partition("nand0", SZ_256K, SZ_256K + SZ_128K, DEVFS_PARTITION_FIXED, "self_raw");
> > - dev_add_bb_dev("self_raw", "self0");
> > - devfs_add_partition("nand0", SZ_512K + SZ_256K, SZ_256K, DEVFS_PARTITION_FIXED, "env_raw");
> > - dev_add_bb_dev("env_raw", "env0");
> > - devfs_add_partition("nand0", SZ_1M, SZ_256K, DEVFS_PARTITION_FIXED, "env_raw1");
> > - dev_add_bb_dev("env_raw1", "env1");
> > + if (at91_boot_media_at25() && IS_ENABLED(CONFIG_DRIVER_SPI_ATMEL)) {
>
> I don't know, but is it better to use (at91_boot_media_at25() && at91_boot_from_spi())
> instead of checking if SPI driver is enabled at compile time?
simple I want one binary whtat work when we boot from mmc/spi/nand
so all the drivers are enabled
Best Regards,
J.
>
> Regards
> Alex
>
> > + devfs_add_partition("m25p0", 0x00000, SZ_64K, DEVFS_PARTITION_FIXED, "at91bootstrap_raw");
> > + devfs_add_partition("m25p0", SZ_64K, SZ_256K + SZ_128K, DEVFS_PARTITION_FIXED, "self_raw");
> > + devfs_add_partition("m25p0", SZ_64K + SZ_256K + SZ_128K, SZ_256K, DEVFS_PARTITION_FIXED, "env_raw");
> > + devfs_add_partition("m25p0", SZ_64K + SZ_512K + SZ_128K, SZ_256K, DEVFS_PARTITION_FIXED, "env_raw1");
> > + } else {
> > + devfs_add_partition("nand0", 0x00000, SZ_256K, DEVFS_PARTITION_FIXED, "at91bootstrap_raw");
> > + dev_add_bb_dev("at91bootstrap_raw", "at91bootstrap");
> > + devfs_add_partition("nand0", SZ_256K, SZ_256K + SZ_128K, DEVFS_PARTITION_FIXED, "self_raw");
> > + dev_add_bb_dev("self_raw", "self0");
> > + devfs_add_partition("nand0", SZ_512K + SZ_256K, SZ_256K, DEVFS_PARTITION_FIXED, "env_raw");
> > + dev_add_bb_dev("env_raw", "env0");
> > + devfs_add_partition("nand0", SZ_1M, SZ_256K, DEVFS_PARTITION_FIXED, "env_raw1");
> > + dev_add_bb_dev("env_raw1", "env1");
> > + }
> >
> > return 0;
> > }
> > --
> > 1.7.10.4
> >
> >
> > _______________________________________________
> > barebox mailing list
> > barebox@xxxxxxxxxxxxxxxxxxx
> > http://lists.infradead.org/mailman/listinfo/barebox
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
