Hi Marek, On Thu, Jan 31, 2013 at 12:07:42AM +0100, Belisko Marek wrote: > Hi, > > I'm just build MLO + barebox.bin for panda from actual master > but booting failed when trying to run barebox.bin: > > barebox 2013.01.0-00158-g1e8c9c5 #1 Wed Jan 30 23:06:40 CET 2013 > > > Board: Texas Instrument's Panda > PandaBoard Revision: 003 > omap-hsmmc omap4-hsmmc0: registered as omap4-hsmmc0 > mci mci0: registered disk0 > malloc space: 0x84000000 -> 0x85ffffff (size 32 MiB) > stack space: 0x8f000000 -> 0x8f007fff (size 32 KiB) > booting from MMC1 > > Any ideas? Strange, I just checked, works for me: Panda PandaBoard Revision: 003 omap-hsmmc omap4-hsmmc0: registered as omap4-hsmmc0 mci mci0: registered disk0 malloc space: 0x84000000 -> 0x85ffffff (size 32 MiB) stack space: 0x8f000000 -> 0x8f007fff (size 32 KiB) booting from MMC1 barebox 2013.01.0-00160-g8d5faa8 #6 Thu Jan 31 09:06:05 CET 2013 Board: Texas Instrument's Panda registered netconsole as cs1 PandaBoard Revision: 003 I2C probe i2c-omap i2c-omap0: bus 0 rev4.0 at 100 kHz omap-hsmmc omap4-hsmmc0: registered as omap4-hsmmc0 mci mci0: registered disk0 ehci ehci0: USB EHCI 1.00 malloc space: 0x8d000000 -> 0x8effffff (size 32 MiB) stack space: 0x8cff8000 -> 0x8cffffff (size 32 KiB) running /env/bin/init... Hit m for menu or any other key to stop autoboot: 3 type exit to get to the menu I just wonder since when the banner does not show up for the MLO anymore. Sascha -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
