This moves the board specific lowlevel code to a separate file for
the omap (and am33xx) boards. This is just a preparation for the
barebox-arm-entry series which needs the SDRAM setup in lowlevel
code rather than initcalls.
No functional change in this series.
Sascha
----------------------------------------------------------------
Sascha Hauer (6):
ARM omap3 beagle: move lowlevel code to lowlevel.c
ARM omap3 phycard-a-l1: move lowlevel code to lowlevel.c
ARM omap3 omap343xdsp: move lowlevel code to lowlevel.c
ARM omap3 omap3evm: move lowlevel code to lowlevel.c
ARM am33xx beaglebone: move lowlevel code to lowlevel.c
ARM omap3 beagle: Compile xload defconfig in Thumb2 mode
arch/arm/boards/beagle/Makefile | 2 +
arch/arm/boards/beagle/board.c | 169 -------
arch/arm/boards/beagle/lowlevel.c | 167 +++++++
arch/arm/boards/beaglebone/Makefile | 2 +
arch/arm/boards/beaglebone/board.c | 240 ----------
arch/arm/boards/beaglebone/lowlevel.c | 248 ++++++++++
arch/arm/boards/omap343xdsp/Makefile | 2 +
arch/arm/boards/omap343xdsp/board.c | 547 ----------------------
arch/arm/boards/omap343xdsp/lowlevel.c | 546 +++++++++++++++++++++
arch/arm/boards/omap3evm/Makefile | 2 +
arch/arm/boards/omap3evm/board.c | 158 -------
arch/arm/boards/omap3evm/lowlevel.c | 160 +++++++
arch/arm/boards/phycard-a-l1/Makefile | 2 +
arch/arm/boards/phycard-a-l1/lowlevel.c | 251 ++++++++++
arch/arm/boards/phycard-a-l1/pca-a-l1.c | 247 ----------
arch/arm/configs/omap3530_beagle_xload_defconfig | 2 +-
16 files changed, 1383 insertions(+), 1362 deletions(-)
create mode 100644 arch/arm/boards/beagle/lowlevel.c
create mode 100644 arch/arm/boards/beaglebone/lowlevel.c
create mode 100644 arch/arm/boards/omap343xdsp/lowlevel.c
create mode 100644 arch/arm/boards/omap3evm/lowlevel.c
create mode 100644 arch/arm/boards/phycard-a-l1/lowlevel.c
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
