Hi All, I'm trying the dfu support for AT91SAM9260EK. I've succefully activated it using th bp button, but the dfu-util give me the error "Cannot open device". I'm doing something wrong? Can someone help me? ----- I'm using: - Barebox 2013.01.0 - at91sam9260ek_defconfig - Ubuntu 12.10 ------- AT91SAM9260EK serial output: dfu_bp pressed detected wait 5s Start DFU Mode dfu: register alt0(barebox) with device /dev/nand0.barebox.bb dfu: register alt1(kernel) with device /dev/nand0.kernel.bb dfu: register alt2(rootfs) with device /dev/nand0.rootfs.bb ------- $ dfu-util -l dfu-util 0.7 ... Found Runtime: [4321:1234] devnum=0, cfg=1, intf=0, alt=0, name="UNDEFINED" Found Runtime: [4321:1234] devnum=0, cfg=1, intf=0, alt=1, name="UNDEFINED" Found Runtime: [4321:1234] devnum=0, cfg=1, intf=0, alt=2, name="UNDEFINED" ------- $ dfu-util -a 1 -D zImage dfu-util 0.7 ... Cannot open device Opening DFU capable USB device... Best regards -- Fabio Porcedda _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
