Hi, On Thursday, December 13, 2012 05:18:20 PM Wolfram Sang wrote: > This patch series first adds a flag to mtd devices which disables special > treatment for bad blocks. That means, they are handled like every other good > block. The second one then adds a scrub command which is basically a simple > erase, only that bad blocks are treated like good blocks and are trying to > be erased (which may succeed or not). This is really *not recommended*, > except for certain development use cases! Much nicer than the hacks I did to clear the BBT ! (unfortunately, don't have any boards that I can test on at the moment). Cheers, Marc > > Wolfram Sang (2): > mtd: nand: add flag to allow erasing of bad blocks > commands: add scrub > > commands/Kconfig | 8 +++++ > commands/flash.c | 68 > ++++++++++++++++++++++++++++++++++++++++- drivers/mtd/core.c | > 9 +++++- > drivers/mtd/nand/nand_write.c | 37 +++++++++++----------- > include/linux/mtd/mtd-abi.h | 2 ++ > 5 files changed, 105 insertions(+), 19 deletions(-) _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
