On Mon, Nov 05, 2012 at 12:08:10PM +0100, Christian Kapeller wrote: > Hi, > > I've just flashed barebox from the next tree onto a TX53-8030 module, > and have to report, that the board won't boot. > > Currently I've tried to run it with MMU off and setting the text-base > to 0x71000000, with no positive results. > > I'll do further investigation, but meanwhile does anyone have barebox > running on a TX53 board? I just tested that it works for me as second stage. I can't test 1st stage atm as I currently have no physical access to the board. Some guesses: Have you checked the correct the correct board revision in the config? It's the default, so I assume it's correct. Are you using the barebox-flash-image link or barebox.bin? You have to use the former because it's a compressed image. You might want to disable compressed image support in General settings -> memory layout -> [ ] pre-bootoloader image And see if that works. Sascha -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
