On 10:11 Sun 16 Sep , Sascha Hauer wrote: > On Fri, Sep 14, 2012 at 09:57:04AM +0200, Jean-Christophe PLAGNIOL-VILLARD wrote: > > > > Adapt phylib from linux > > > > switch all the driver to it > > > > This will allow to have > > - phy drivers > > - to only connect the phy at then opening of the device > > - if the phy is not ready fail on open > > > > Same behaviour as in linux and will allow to share code and simplify porting. > > > > Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx> > > --- > > [...] > > + > > +/* Automatically gets and returns the PHY device */ > > +int phy_device_connect(struct mii_device *bus, int addr, > > + void (*adjust_link) (struct mii_device *miidev)) > > The prototype of adjust_link seems wrong. A mii_device is a mii bus with > potentially multiple phys. adjust_link should work on the phy_device. With > the above, when a mii_device has multiple phys, a network driver has no > way to figure out which phy has an updated link. > > This probably bites Renaud who has a single mii bus for multiple network > devices. not really as the phydev have a bus field so will be the same but I guess we wil have to do like in linux attacehd the phydev to the eth_device Best Regars, J. _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
