Hi Sacha,
after applying the phylib we need this path on calao hw
Best Regards,
J.
On 17:48 Tue 14 Aug , Jean-Christophe PLAGNIOL-VILLARD wrote:
> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
> ---
> arch/arm/boards/qil-a9260/init.c | 2 +-
> arch/arm/boards/tny-a926x/init.c | 2 +-
> arch/arm/boards/usb-a926x/init.c | 2 +-
> 3 files changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/arch/arm/boards/qil-a9260/init.c b/arch/arm/boards/qil-a9260/init.c
> index ee204fb..92aea97 100644
> --- a/arch/arm/boards/qil-a9260/init.c
> +++ b/arch/arm/boards/qil-a9260/init.c
> @@ -80,7 +80,7 @@ static void qil_a9260_add_device_mci(void) {}
> #ifdef CONFIG_CALAO_MB_QIL_A9260
> static struct at91_ether_platform_data macb_pdata = {
> .flags = AT91SAM_ETHER_RMII,
> - .phy_addr = 0,
> + .phy_addr = -1,
> };
>
> static void qil_a9260_phy_reset(void)
> diff --git a/arch/arm/boards/tny-a926x/init.c b/arch/arm/boards/tny-a926x/init.c
> index d58132a..556e633 100644
> --- a/arch/arm/boards/tny-a926x/init.c
> +++ b/arch/arm/boards/tny-a926x/init.c
> @@ -118,7 +118,7 @@ static void tny_a9260_add_device_nand(void)
> #ifdef CONFIG_DRIVER_NET_MACB
> static struct at91_ether_platform_data macb_pdata = {
> .flags = AT91SAM_ETHER_RMII,
> - .phy_addr = 0,
> + .phy_addr = -1,
> };
>
> static void __init ek_add_device_macb(void)
> diff --git a/arch/arm/boards/usb-a926x/init.c b/arch/arm/boards/usb-a926x/init.c
> index 52444e1..7b19fa4 100644
> --- a/arch/arm/boards/usb-a926x/init.c
> +++ b/arch/arm/boards/usb-a926x/init.c
> @@ -122,7 +122,7 @@ static void usb_a9260_add_device_nand(void) {}
> #if defined(CONFIG_DRIVER_NET_MACB)
> static struct at91_ether_platform_data macb_pdata = {
> .flags = AT91SAM_ETHER_RMII,
> - .phy_addr = 0,
> + .phy_addr = -1,
> };
>
> static void usb_a9260_phy_reset(void)
> --
> 1.7.10.4
>
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
