Signed-off-by: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx> --- arch/arm/boards/freescale-mx6-sabrelite/board.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/arch/arm/boards/freescale-mx6-sabrelite/board.c b/arch/arm/boards/freescale-mx6-sabrelite/board.c index 13279bc..6490988 100644 --- a/arch/arm/boards/freescale-mx6-sabrelite/board.c +++ b/arch/arm/boards/freescale-mx6-sabrelite/board.c @@ -77,6 +77,11 @@ static iomux_v3_cfg_t sabrelite_pads[] = { MX6Q_PAD_EIM_D17__ECSPI1_MISO, MX6Q_PAD_EIM_D18__ECSPI1_MOSI, MX6Q_PAD_EIM_D19__GPIO_3_19, /* CS1 */ + + /* USB */ + MX6Q_PAD_GPIO_17__GPIO_7_12, + MX6Q_PAD_EIM_D22__GPIO_3_22, + MX6Q_PAD_EIM_D30__USBOH3_USBH1_OC, }; static iomux_v3_cfg_t sabrelite_enet_pads[] = { @@ -227,6 +232,19 @@ static struct esdhc_platform_data sabrelite_sd4_data = { .wp_type = ESDHC_WP_NONE, }; +static void sabrelite_ehci_init(void) +{ + imx6_usb_phy1_disable_oc(); + imx6_usb_phy1_enable(); + + /* hub reset */ + gpio_direction_output(204, 0); + udelay(2000); + gpio_set_value(204, 1); + + add_generic_usb_ehci_device(1, MX6_USBOH3_USB_BASE_ADDR + 0x200, NULL); +} + static int sabrelite_devices_init(void) { imx6_add_mmc2(&sabrelite_sd3_data); @@ -237,6 +255,8 @@ static int sabrelite_devices_init(void) imx6_add_fec(&fec_info); mx6_rgmii_rework(); + sabrelite_ehci_init(); + spi_register_board_info(sabrelite_spi_board_info, ARRAY_SIZE(sabrelite_spi_board_info)); imx6_add_spi0(&sabrelite_spi_0_data); -- 1.7.10.4 _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox