On 08:53 Wed 29 Aug , Sascha Hauer wrote: > On Wed, Aug 29, 2012 at 07:06:18AM +0200, Jean-Christophe PLAGNIOL-VILLARD wrote: > > poll the READY bit in PMT_CTRL. Any other access to the device is > > forbidden while this bit isn't set. Try for 100ms > > > > Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx> > > --- > > drivers/net/smc911x.c | 12 ++++++++++++ > > 1 file changed, 12 insertions(+) > > > > diff --git a/drivers/net/smc911x.c b/drivers/net/smc911x.c > > index cfcd83f..3695d32 100644 > > --- a/drivers/net/smc911x.c > > +++ b/drivers/net/smc911x.c > > @@ -422,6 +422,7 @@ static int smc911x_probe(struct device_d *dev) > > uint32_t val; > > int is_32bit; > > struct smc911x_plat *pdata = dev->platform_data; > > + unsigned int to = 100; > > > > priv = xzalloc(sizeof(*priv)); > > is_32bit = dev->resource[0].flags & IORESOURCE_MEM_TYPE_MASK; > > @@ -452,6 +453,17 @@ static int smc911x_probe(struct device_d *dev) > > } > > } > > > > + /* > > + * poll the READY bit in PMT_CTRL. Any other access to the device is > > + * forbidden while this bit isn't set. Try for 100ms > > + */ > > + while (!(smc911x_reg_read(priv, PMT_CTRL) & PMT_CTRL_READY) && --to) > > + udelay(1000); > > please use a regular timeout loop code from the kernel I prefer to keep it as it Best Regards, J. _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
