On 23:42 Wed 18 Apr , George Pontis wrote: > Machine is a custom at91sam9g45 board with NOR and NAND flash. The > bootstrap loader and barebox, and barebox environment are in the NOR > flash. All seems to be working well there. The NAND is partitioned into 2 > chunks: 2560K(kernel),-(root) > > > > I used ubimkvol to create a volume on root and the nfs command to put a > root filesystem on it. Seems to work fine if I get the kernel via NFS. > > > > I have a good working kernel in uImage format, and used "nfs > /var/share/uImage /dev/nand0.kernel.bb" in an attempt to write it to the > 2560K partition. The nfs copy seemed to work fine. However, it will not > accept the image. I get messages about an unknown format, suggesting to > try -f. Was it the wrong procedure that I used to copy the uImage ? > > > > Thanks for any help or pointers. I recommand you to use upate command to bo so update -t kernel -d nand -m nfs -f /var/share/uImage I recommand you also to drop the uImage support and boot the zImage directly you will boot more fast and I also recommand you to boot from nor if you can so you don't need the bootstrap Best Regards, J. _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
