On Wed, Apr 18, 2012 at 11:32:41PM -0700, George Pontis wrote: > Hi fellow barebox users. What a great loader, thanks to all of you for > sharing your work on this. > > > > I've brought barebox up on a custom at91sam9g45 board that has both NOR and > NAND flash, and one SD card connected to the MMC interface. I was previously > using all these with an older version of u-boot and in Linux, so I am pretty > sure that the hardware is working properly. > > > > For some reason, I can't access any files on a 4G SD card. After booting > into barebox, there is a /dev/disk0. I can mount it without error, for > example mount /dev/disk0 fat /mmc. But ls /mmc does not show any content, > and I know that there are many files there. The card is not partitioned. > Have I overlooked something ? If not, any suggestions where to look for the > cause of the problem ? Sorry, barebox currently can't access anything > 4GB and some pieces may have problems with 2GB. Please try either a smaller SD Card or add partition your SD card and add a partition smaller than 2GB. This is being worked on. Hopefully we have support for bigger SD cards soon. Sascha -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
