On Fri, Mar 30, 2012 at 06:56:39AM +0200, Jean-Christophe PLAGNIOL-VILLARD wrote: > HI, > > this patch serie update the rm9200 support with > > - USB OHCI > - USB Device (USB serial) > - leds > > and add the basic support for the sam9x5 series > > NB: the hardware ecc PMECC is not yet supported > > please pull > The following changes since commit 79ea2bb5284cc4b5b28a3fa3fee6ede7304e4179: > > at91rm9200ek: adjust kernel partition to be able to flash mainline kernel (2012-03-30 12:51:54 +0800) > > are available in the git repository at: > > git://git.jcrosoft.org/barebox.git at91 Applied, thanks. If you send pull requests please make sure they don't contain any other patches. This pull request has the at91-fixes branch in it. Sascha > > for you to fetch changes up to bfd880f58915ae8098a6a0603e1003efc9d6feae: > > AT91: at91sam9x5: add chip and board file (2012-03-30 13:00:23 +0800) > > ---------------------------------------------------------------- > Jean-Christophe PLAGNIOL-VILLARD (9): > at91rm9200ek: add ohci support > at91rm9200ek: add leds support > at91rm9200ek: add usb serial support > at91rm9200ek: update defconfig > atmel_nand: add on_flash_btt option to enable bbt option > ARM: at91: add sam9x5 series CPU definition and cpu_is_xxx macro > ARM: at91: allow to pass the interface id to at91_add_device_eth > ARM: at91/pio: add new PIO3 features > AT91: at91sam9x5: add chip and board file > > arch/arm/Makefile | 1 + > arch/arm/boards/at91rm9200ek/env/bin/init_board | 11 + > arch/arm/boards/at91rm9200ek/init.c | 65 ++++- > arch/arm/boards/at91sam9260ek/init.c | 2 +- > arch/arm/boards/at91sam9263ek/init.c | 2 +- > arch/arm/boards/at91sam9m10g45ek/init.c | 2 +- > arch/arm/boards/at91sam9x5ek/Makefile | 1 + > arch/arm/boards/at91sam9x5ek/config.h | 6 + > arch/arm/boards/at91sam9x5ek/env/config | 38 +++ > arch/arm/boards/at91sam9x5ek/init.c | 167 +++++++++++ > arch/arm/boards/dss11/init.c | 2 +- > arch/arm/boards/mmccpu/init.c | 2 +- > arch/arm/boards/pm9263/init.c | 2 +- > arch/arm/boards/pm9g45/init.c | 2 +- > arch/arm/boards/tny-a926x/init.c | 2 +- > arch/arm/boards/usb-a926x/init.c | 2 +- > arch/arm/configs/at91rm9200ek_defconfig | 18 +- > arch/arm/configs/at91sam9x5ek_defconfig | 69 +++++ > arch/arm/mach-at91/Kconfig | 25 ++ > arch/arm/mach-at91/Makefile | 1 + > arch/arm/mach-at91/at91rm9200_devices.c | 4 +- > arch/arm/mach-at91/at91sam9260_devices.c | 4 +- > arch/arm/mach-at91/at91sam9263_devices.c | 4 +- > arch/arm/mach-at91/at91sam9g45_devices.c | 4 +- > arch/arm/mach-at91/at91sam9x5.c | 314 ++++++++++++++++++++ > arch/arm/mach-at91/at91sam9x5_devices.c | 270 +++++++++++++++++ > arch/arm/mach-at91/clock.c | 82 ++++- > arch/arm/mach-at91/gpio.c | 129 ++++++++- > arch/arm/mach-at91/include/mach/at91_pio.h | 25 ++ > arch/arm/mach-at91/include/mach/at91_pmc.h | 68 ++++- > arch/arm/mach-at91/include/mach/at91sam9x5.h | 179 +++++++++++ > .../arm/mach-at91/include/mach/at91sam9x5_matrix.h | 139 +++++++++ > arch/arm/mach-at91/include/mach/board.h | 2 +- > arch/arm/mach-at91/include/mach/cpu.h | 28 ++ > arch/arm/mach-at91/include/mach/gpio.h | 6 + > arch/arm/mach-at91/include/mach/hardware.h | 2 + > drivers/mtd/nand/atmel_nand.c | 6 + > 37 files changed, 1628 insertions(+), 58 deletions(-) > create mode 100644 arch/arm/boards/at91rm9200ek/env/bin/init_board > create mode 100644 arch/arm/boards/at91sam9x5ek/Makefile > create mode 100644 arch/arm/boards/at91sam9x5ek/config.h > create mode 100644 arch/arm/boards/at91sam9x5ek/env/config > create mode 100644 arch/arm/boards/at91sam9x5ek/init.c > create mode 100644 arch/arm/configs/at91sam9x5ek_defconfig > create mode 100644 arch/arm/mach-at91/at91sam9x5.c > create mode 100644 arch/arm/mach-at91/at91sam9x5_devices.c > create mode 100644 arch/arm/mach-at91/include/mach/at91sam9x5.h > create mode 100644 arch/arm/mach-at91/include/mach/at91sam9x5_matrix.h > > Best Regards, > J. > > _______________________________________________ > barebox mailing list > barebox@xxxxxxxxxxxxxxxxxxx > http://lists.infradead.org/mailman/listinfo/barebox > -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
